Fire Stopping in Firrhill
Looking for fire stopping in Firrhill? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire seals cut back for extra cables and never reinstated
- Openings found when ceilings come down for a refit
- Snag lists that include open service penetrations
Fire stopping across Firrhill
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Firrhill, done properly
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. We work on cable penetrations, linear gaps at wall heads and pipe penetrations, and the failures we’re asked to look at most are seals disturbed by maintenance and left open and fire-stopping items raised at inspection or handover. For commercial sealant work in Firrhill, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. In Firrhill, penetrations get the fire-rated sealant the specification asks for, built to its tested arrangement.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or email drawings and photos and we will come back to it.
- Place
- Firrhill (EH13, EH10, EH14)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Different surfaces, different methods
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables and we work within those limits.
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do.
What affects the price in Firrhill
The price varies from site to site. It mainly depends on:
- Distance, for remote addresses
- The site’s rules and procedures
- Quantities, in metres or numbers
- The size and state of each joint
We don’t publish prices, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
What to include in your enquiry
However big the job, the same details help:
- The site address and postcode
- Specification clauses that apply
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
For a fixed quote, call the office on 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.
Other services in Firrhill
Compartments and services around Firrhill
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install what’s specified, to the product’s tested detail. Seven care or nursing homes sit less than 2 miles from Firrhill. Where new services have gone through compartment walls in a care setting, the gaps need the specified product.
Residences at universities like Edinburgh Napier University (to the north-west of Firrhill) have compartment walls that must be resealed whenever services change. Colleges such as Edinburgh College - Sighthill Campus (2.4 miles west of Firrhill) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Firrhill is about 2 miles south-west of Edinburgh, in Edinburgh. We send applicators to Firrhill for service penetrations, handled exactly as we handle every other area. Across Edinburgh, 174 places are covered, including Firrhill.
Work on service penetrations is covered throughout EH13, EH10 and EH14. Streets here include Elliot Road, Greenbank Road and Oxgangs Avenue. Close to Firrhill, our area also takes in Colinton Mains (1 mile south-east), Greenbank (1 mile east), Redford (1 mile south-west), Oxgangs (1 mile south-east) and Comiston (1 mile east). A short drive away, we cover Leith (5 miles north-east), Bonnington (4 miles north-east), Greenside (4 miles north-east), Broughton (4 miles north-east), Bellevue (4 miles north-east) and Silvermills (3 miles north).
Local landmarks in Firrhill
Recent enquiries here include premises near Cross Keys Tavern, Army School of Bagpipe Music and Highland Drumming and Harrison Park, among other places. For rail, the closest station is Slateford station, about 1 mile north-west of the centre. A little further out are Cameron Toll Shopping Centre (2.8 miles east) and Murrayfield Experience (1.9 miles north). Open spaces near Firrhill include The New Leaf Co-op and Duddingston Loch.
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Approving the work on behalf of building control
- Construction that lacks the fire resistance the seal relies on
- Openings that need collars, wraps, batts or boards rather than sealant
Not sure which it is? You can call the office on 01277 525 020 or email the details over and we will tell you honestly before you book.
Where we work in Firrhill
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
Common questions from Firrhill clients
Which Scottish guidance covers penetration seals in Firrhill?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will you plan work around the academic year at somewhere like Edinburgh Napier University?
Yes. We plan campus work around teaching, exams and residence turnarounds. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
When can the area be used after sealing?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we will set out a timescale with the quote.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Signs you need fire stopping in Firrhill
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps, and the wrong product can split as a result. Linear joint details set a width range and movement capability, and the seal has to sit within them.
What tends to prompt an enquiry:
- Improvised or mixed-product fire seals
- Penetration schedules that need working through
- Non-fire-rated filler around services
- Damaged fire seals in risers and voids
In a hotel such as Braid Hills Hotel, which lies east of Firrhill, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Comparing quotes
- Will failed sealant be removed rather than covered?
- Will RAMS and insurance details be available?
- Health and safety accreditation such as CHAS
- The named product and why it was chosen
How a job runs
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and our waste is bagged and taken away as we go. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Share your working hours and any access restrictions
- Point out any areas we must not close
- Arrange parking or a loading space
Getting a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.