Edzell fire stopping
Need fire stopping in Edzell? It’s simple: send details, get a quote, we seal, guaranteed.
- Snag lists that include open service penetrations
- Openings left by services added after handover
- Head-of-wall gaps with no fire seal
Fire stopping across Edzell
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Edzell
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance in Edzell and nearby. If you have unsealed joints where partitions meet the slab and unsealed penetrations discovered above suspended ceilings, we can put it right. A specialist sealant contractor works differently from a general builder: on jobs in Edzell, preparation and product choice get the time they need.
For a building near Edzell, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photographs of the openings, with sizes if you have them.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Edzell (DD9)
- Region
- Angus
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Also in Edzell
Leave it or put it right?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What you get with us
- Work to your specification and the manufacturer’s guidance
- Fixed quotes based on photos, drawings or a visit
- Joints cleaned back to sound surfaces
- Health and safety: CHAS accredited
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For work around Edzell, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Share the asbestos register for older buildings
- Warn occupants and staff about the work
- Send your site hours and access windows
Ask for a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call the office on 01277 525 020 or email us.
Read more
Service penetrations in Edzell buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
On a hospital site such as Stracathro Hospital, 2.7 miles south-east of Edzell, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. Halls and meeting rooms at places like Edzell Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal. In a hotel such as Glenesk Hotel, less than half a mile to the south of Edzell, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Edzell is about 10 miles north-west of Montrose, in Angus. We cover Edzell and the rest of Angus, with the same fixed quotes and 12-month guarantee as everywhere else. Edzell is one of 65 places we cover in Angus for service penetrations. For work in that direction, see our Dundee page.
Work on service penetrations is covered throughout DD9, whatever the building. Among the streets we cover are High Street, Dalhousie Street and Manse Road. Close to Edzell, our area also takes in Edzell Woods (1 mile east), Luthermuir (4 miles east), Little Brechin (4 miles south), Sauchieburn (4 miles east) and Fettercairn (4 miles north-east). Bigger towns within reach include Forfar (14 miles south-west), Montrose (10 miles south-east), Brechin (5 miles south), Letham (13 miles south), Hillside (8 miles south-east) and Ferryden (10 miles south-east).
Near you in Edzell
Other landmarks nearby include Edzell Castle (0.9 miles west) and Stracathro Hospital (2.7 miles south-east). The countryside around Edzell includes Brown Caterthun.
How the quote is worked out
There’s no standard rate for sealant work, because every site is different. What we look at:
- Specialist products, such as fire-rated or hygienic sealants
- How much there is to seal
- Distance, for remote addresses
- Whether old sealant has to be cut out first
Pricing service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Sending details for a quote
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Access details, including height
- Photos of the joints, close up and from further back
- Where the site is, with the postcode
- Approximate linear metres or a joint schedule
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Edzell: questions and answers
Can you work on a hospital site such as Stracathro Hospital?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Is Edzell too small for you to travel to?
No. Places such as Edzell are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Does weather matter for sealant work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs normally get a visit.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Agree the fire-stopping specification before services go in
- Check risers and ceiling voids after each round of works
- File the specified details where the next contractor can find them
- Arrange inspection before areas are covered up
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there.