Fire-rated sealing and fire stopping in Letham, Angus
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Letham and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Service penetrations left open after M&E works
- Non-fire-rated filler around services
- Openings found when ceilings come down for a refit
Fire stopping for businesses in Letham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Letham
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. We work on small duct penetrations where the tested detail allows, joints between fire-resisting walls and floors and pipe penetrations, and the usual reasons a site gets in touch are openings left by services added after handover and damaged fire seals in risers and voids. Most enquiries from Letham start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a building near Letham, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or send photos by email and we’ll come back to it.
- Where
- Letham (DD8)
- Wider area
- Angus
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail, and any bundle too large for sealant alone is flagged.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point so we know it sits within the tested range.
More services for Letham
Fire stopping in Letham: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
For a hospital such as Whitehills Hospital (4.1 miles west of Letham), penetration sealing is typically phased ward by ward, with infection-control rules agreed first.
Letham is about 5 miles east of Forfar, in Angus. We cover Letham, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Angus, 65 places are covered, including Letham. Dundee is covered too, around 13 miles from Letham.
If you need fire stopping in DD8, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are The Square, Kirkgait and Gardyne Street, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Craichie (2 miles south-west), Tulloes (2 miles south-west), Hillend (2 miles west), Lownie Moor (3 miles west) and Kingsmuir (3 miles west) for service penetrations. Nearby towns on our patch include Arbroath (8 miles south-east), Forfar (5 miles west), Montrose (13 miles north-east), Monifieth (10 miles south), Carnoustie (9 miles south) and Kirriemuir (9 miles west).
Around Letham
Well-known places in the area include Whitehills Hospital (4.1 miles west) and Balgavies Castle (1.9 miles north). Open spaces near Letham include Balgavies Loch.
Do you need fire stopping in Letham?
Plenty of openings were simply never closed. They come to light during inspections, refits or when another trade lifts a tile.
If one of these sounds familiar, it’s time for a closer look:
- Seals that don’t match their tested detail
- Hidden openings found during inspections
- Fire-rated sealant that has cracked or shrunk back
- Fire seals cut back for extra cables and never reinstated
Halls and meeting rooms at places like Old Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
What to look for in a quote
- The named product and why it was chosen
- Do they follow the manufacturer’s priming guidance?
- What level of public liability insurance do they hold?
- Are they CHAS accredited or on Constructionline?
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Letham can sit alongside others in a wider programme.
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and we clear our waste as we work. For work around Letham, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Explain the parking and delivery arrangements
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
Your questions answered
Is Letham too far out for you?
No. Places such as Letham are covered as much as the big towns. We work across every Scottish council area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
What do Scotland’s building standards say about service penetrations in Letham?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months on every job.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- How accessible the joints are
- Quantities, in metres or numbers
- Phasing around occupants
- The size and state of each joint
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Any specification or named product
- Whether an asbestos survey exists
- Clear photos of the problem areas
- Any dates the work must fit around
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Aftercare for building managers
A few simple habits keep the new joints working:
- Look above ceilings when tiles are lifted for other jobs
- Don’t let anyone top up a fire seal with the wrong product
- Keep product data and details in the fire safety file
- Ask which product is in place before decorating
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job.