Fire Stopping in Evanton
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Evanton and the surrounding area. Send details for a fixed quote.
- Fire seals cut back for extra cables and never reinstated
- Old intumescent sealant that has split away
- Non-fire-rated filler around services
Fire stopping in Evanton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Evanton, done properly
Facilities managers in Evanton often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. Where there isn’t one, the designer or fire engineer needs to set one first. If you have fire-stopping items raised at inspection or handover and non-fire-rated filler around services, we can put it right, whatever the surface. Searching for sealant specialists in Evanton? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
Around smaller places such as Evanton, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Evanton (IV16)
- Region
- Highland
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Honest limits
Before quoting, we check that sealant is the right answer. It won’t put right:
- Plastic pipes whose detail calls for a collar or wrap
- Signing off or certifying a building’s fire stopping
- Walls or floors that aren’t fire-resisting to begin with
If in doubt, phone 01277 525 020 or email the details over and we will say what we think.
Where we work in Evanton
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
When to bring in a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Questions about Evanton
Is Evanton too far out for you?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
How do the Scottish rules apply to fire-rated sealing in Evanton?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Where services cross fire walls in Evanton
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Hotels such as Novar Arms Hotel (to the south-east of Evanton) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. On estates like Highland Deephaven Industrial Estate, 1 mile east of Evanton, the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal. At a healthcare site like Ross Memorial Hospital, 5.6 miles south-west of Evanton, new services through compartment walls are a constant, and each needs the specified seal.
Evanton (Gaelic: Baile-Eoghain) is about 14 miles north of Inverness, in Highland. Commercial clients in Evanton can call on us for service penetrations. We work across 256 places in Highland.
Anyone looking for fire stopping in IV16 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Station Road, Camden Street and Balconie Street or close by, we can quote for service penetrations. If your building is just outside Evanton, we cover Cullicudden (3 miles south-east), Alness (4 miles north-east), Dalmore (4 miles north-east), Culbokie (4 miles south) and Dingwall (5 miles south-west). Nearby towns on our patch include Inverness (14 miles south), Cradlehall (15 miles south-east), Tain (14 miles north-east), Merkinch (13 miles south), Hilton (15 miles south) and Crown (14 miles south). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
What’s near Evanton
The nearest railway station is Alness station, about 3.9 miles north-east of the centre. Other landmarks nearby include Balconie Castle (0.6 miles south-east) and Ross Memorial Hospital (5.6 miles south-west). Not far away are Cnoc Fyrish.
Owners, agents and contractors
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Evanton can form part of a wider programme across Highland.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Share these points with them:
- Ask which product is in place before decorating
- Brief every trade that openings they make must be sealed
- Settle who seals which penetrations at the start of a project
- File the specified details where the next contractor can find them
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job; found late, it can be one of many.
Places near Evanton
Other services in Evanton
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Evanton. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Tell staff and tenants when we will be in
- Confirm the product named in the specification
- Tell us which areas need to stay in use
Request a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
What the job involves on each surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, with backing added if the detail requires it.