Fire-rated sealing and fire stopping in Fettercairn, Aberdeenshire
Fire-rated and intumescent sealing of service penetrations and linear gaps in Fettercairn. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Unsealed openings around new pipes and cables
- Unsealed penetrations discovered above suspended ceilings
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping near Fettercairn
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Fettercairn
Facilities managers in Fettercairn often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you have non-fire-rated filler around services and fire-stopping items raised at inspection or handover, we can put it right. For commercial sealant work in Fettercairn, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Hotels and care homes around smaller places like Fettercairn often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Fettercairn (AB30)
- Wider area
- Aberdeenshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Fire stopping around Fettercairn: points for this area
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Hospital estates such as Stracathro Hospital (5.4 miles south of Fettercairn) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. Hotels such as Ramsay Arms Hotel (under half a mile south-west of Fettercairn) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Fettercairn is about 10 miles north-west of Montrose, in Aberdeenshire. We cover commercial sites throughout Fettercairn, whether it’s a single job or part of a planned programme. 179 places across Aberdeenshire fall within our area, including Fettercairn. Aberdeen is covered too, some 27 miles away.
If you need fire stopping in AB30, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on The Square, Main Street and School Road or close by, send details and we will quote for service penetrations. Sites close to Fettercairn are covered too, including Sauchieburn (3 miles south-east), Edzell Woods (3 miles south-west), Luthermuir (3 miles south), Laurencekirk (4 miles east) and Edzell (4 miles south-west). Nearby towns on our patch include Stonehaven (15 miles north-east), Banchory (15 miles north), Inverbervie (11 miles east), St Cyrus (8 miles south-east) and Johnshaven (10 miles south-east).
Local landmarks in Fettercairn
The nearest railway station is Laurencekirk station, roughly 4.3 miles east of the centre. Other landmarks nearby include Thornton Castle (2.5 miles south-east) and Stracathro Hospital (5.4 miles south). Green spaces nearby include Hound Hillock.
Common questions from Fettercairn clients
Is Fettercairn too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Good photos up front let us bring everything on the first visit.
Would you work within a site like Stracathro Hospital?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Do you have third-party installer accreditation for fire stopping?
No, and we’d rather be clear about that. Some clients require third-party installer schemes even though the law doesn’t. Where it isn’t required, we install the specified sealant to the maker’s details.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Is BS 476 being phased out?
It mainly affects England, where Approved Document B is dropping its BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence, though transitional rules apply. Scotland follows its own Technical Handbook, including clause 2.1.14 on service penetrations.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Places near Fettercairn
More services for Fettercairn
Why it’s worth doing now in Fettercairn
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Why us?
- Joints cleaned back to sound surfaces
- Constructionline member for supplier checks
- A fixed quote before work starts
- Products installed to the manufacturer’s instructions
See how commercial sealant jobs are priced or our accreditations and insurance.
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:
- Approving the work on behalf of building control
- Gaps in walls that were never built as compartment walls
- Openings that need collars, wraps, batts or boards rather than sealant
Not sure which it is? You can ring 01277 525 020 or email us and we’ll tell you honestly before you book.
What we seal
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
Our process
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For a building near Fettercairn, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell us your opening times and when work is allowed
- Arrange parking or a loading space
- Tell us what induction or permit system the site runs
Request a quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or send photos by email.
Read more
Common problems we fix in Fettercairn
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position and has to be removed.
These are often picked up first by site or facilities staff:
- Service penetrations left open after M&E works
- Fire-stopping items raised at inspection or handover
- Hidden openings found during inspections
- Unsealed joints where partitions meet the slab
Older community buildings such as Fettercairn Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Questions to ask before you book
- Their plan for phasing and protecting the area
- Will CSCS-carded applicators be on site?
- The named product and why it was chosen
- Their approach to joint depth and backing
After the work
For the best life from the joints:
- Arrange inspection before areas are covered up
- Keep general-purpose fillers away from compartment walls
- Leave fire sealant to cure fully before covering it
- Flag new cables with no seal around them
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged, and report them promptly.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
Should maintenance staff do it?
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.