Fire stopping in Drinisiadar
Fire-rated and intumescent sealing of service penetrations and linear gaps in Drinisiadar and across Na h-Eileanan Siar. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed openings around new pipes and cables
- Expanding foam used as fire stopping
- Unsealed penetrations discovered above suspended ceilings
Need fire stopping in Drinisiadar?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Questions we are asked in Drinisiadar
Do you decide the fire-stopping details for buildings in Drinisiadar?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
What do Scotland’s building standards say about service penetrations in Drinisiadar?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
How do we ask for a quote?
You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
How we handle fire stopping in Drinisiadar
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on joints between fire-resisting walls and floors, linear gaps at wall heads and pipe penetrations, and the failures we are asked to look at most are non-fire-rated filler around services and unsealed joints where partitions meet the slab. Most enquiries from Drinisiadar start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Drinisiadar is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Location
- Drinisiadar (HS3)
- Wider area
- Na h-Eileanan Siar
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Drinisiadar
What else we do in Drinisiadar
Quoting for work in Drinisiadar
Each job is priced on its own details. The things that drive the figure:
- Travel to remote or island sites
- The site’s rules and procedures
- Working within restricted access windows
- Whether old sealant has to be cut out first
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
Whether it’s one area or a whole building, the same details help:
- What the building is and how it’s used
- Specification clauses that apply
- Photos of the joints, close up and from further back
- Anything awkward about access or site hours
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to speak to us on 01277 525 020 or email drawings and photos with what you know.
Building owners, agents and FMs in Drinisiadar
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Compartment walls and floors in Drinisiadar
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. Work on Drinisiadar has to fit the ferry timetable and the forecast. With the specification and photos of the openings, the right fire-rated products travel with us.
Around Drinisiadar, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Drinisiadar (Gaelic: Drinishader) is in Na h-Eileanan Siar. We send applicators to Drinisiadar for service penetrations. Drinisiadar is one of 87 places we cover in Na h-Eileanan Siar.
If you need fire stopping in HS3, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Nearby places we also cover include Plocrapool (1 mile south-east), Scadabhagh (1 mile south), Miabhaig (1 mile north-west), Greosabhagh (2 miles south-west) and Direcleit (3 miles north-west) for service penetrations. Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you give us a call on 01277 525 020 or email us.
Local landmarks in Drinisiadar
Not far away are Loch Laxdale.
Different surfaces, different methods
Small ducts
We seal around ducts only within what the tested detail covers. The ductwork, its supports and any dampers are for the ductwork contractor.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do and we’ll tell you what the detail says instead.
General trades versus a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Do you need fire stopping in Drinisiadar?
Openings in fire-resisting walls typically appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Over a few years of fit-outs, a wall can collect a lot of these.
Most enquiries start with something like this:
- Penetration schedules that need working through
- Non-fire-rated filler around services
- Open linear gaps along the top of fire-resisting walls
- Unsealed penetrations discovered above suspended ceilings
Wherever the building is near Drinisiadar, design and sign-off of fire stopping sit with the designer, fire engineer or building control; we install what has been specified.
Before you book anyone
- Will CSCS-carded applicators be on site?
- Which product they’ll use, and why it suits the joint
- Their approach to joint depth and backing
- Will RAMS and insurance details be available?
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Drinisiadar is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell us your opening times and when work is allowed
- Let us know about inductions and permits
- Move anything stored against the joints
Request a quote
To get a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. Our quote form is another easy route.