Greosabhagh fire stopping
Sealant work in Greosabhagh for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire stopping installed outside its tested range
- Non-fire-rated filler around services
- Fire-stopping items raised at inspection or handover
Need fire stopping in Greosabhagh?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Fire stopping for commercial buildings in Greosabhagh
Facilities managers in Greosabhagh often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. Where there isn’t one, the designer or fire engineer needs to set one first. The enquiries we see most involve damaged fire seals in risers and voids and old intumescent sealant that has split away, on small duct penetrations where the tested detail allows, cable penetrations and joints between fire-resisting walls and floors. A single leaking joint is often how a building in Greosabhagh first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Greosabhagh is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Greosabhagh (HS3)
- Wider area
- Na h-Eileanan Siar
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Jobs near Greosabhagh are often grouped with others in the same area. Tell us how flexible your dates are.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Tell us what induction or permit system the site runs
- Confirm the product named in the specification
- Agree which areas must stay open
Getting a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Where services cross fire walls in Greosabhagh
Island jobs, Greosabhagh among them, are planned around the ferry and the forecast. The specification and photographs of each penetration let us bring the right products first time. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Around Greosabhagh, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product. Around Greosabhagh, fire-stopping design belongs to the designer and building control; installation to the specification is our part.
Greosabhagh is in Na h-Eileanan Siar. If you are looking for fire stopping in Greosabhagh, we can help, as we do across Na h-Eileanan Siar. 87 places across Na h-Eileanan Siar fall within our area, Greosabhagh among them.
Anyone looking for fire stopping in HS3 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Greosabhagh, we cover Scadabhagh (1 mile east), Plocrapool (2 miles east), Drinisiadar (2 miles north-east), Miabhaig (2 miles north) and Direcleit (4 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Around Greosabhagh
Green spaces nearby include Loch Laxdale.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Reviewing a building’s overall fire safety
- Construction that lacks the fire resistance the seal relies on
- Deciding what a wall or floor needs, which belongs to the designer
If you are not sure, just phone 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Surfaces we seal
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- Joint width, depth and condition
- The site’s rules and procedures
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
What we need to price the job
Diagnosis starts before we arrive. Tell us:
- How the joints are reached, and at what height
- The asbestos register, for older buildings
- The product your specification calls for
- Photos of the joints, close up and from further back
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or email the details over to discuss it first.
Owners, agents and contractors
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Greosabhagh can form part of a wider programme across Na h-Eileanan Siar.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Towns and villages near Greosabhagh
What else we do in Greosabhagh
Questions we’re asked in Greosabhagh
How do Scotland’s building standards affect fire-rated sealant in Greosabhagh?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will you travel to Greosabhagh on the island?
Yes. Our area covers all of Scotland, cities, towns and islands alike, and that includes island locations such as Greosabhagh. Ferry times and the weather set the plan, so we ask for photos and a full list first.
What will the job cost?
Every job gets its own fixed quote. To get one, speak to us on 01277 525 020 or use the quote form with a description of the work.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
How many days will you need on site?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or email the details over. Photos, drawings or a joint schedule help us quote quickly.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Maintenance after handover
A few simple habits keep the new joints working:
- Arrange inspection before areas are covered up
- Foam or ordinary sealant is never a fire-seal repair
- Look above ceilings when tiles are lifted for other jobs
- Record which product was used where
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate.