
Fire Stopping in Sgalpaigh
Fire-rated and intumescent sealing of service penetrations and linear gaps in Sgalpaigh. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Unsealed penetrations discovered above suspended ceilings
- Service penetrations left open after M&E works
- Fire-stopping items raised at inspection or handover
Fire stopping in Sgalpaigh
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Sgalpaigh
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. If you have damaged fire seals in risers and voids and penetration schedules that need working through, we can help, whatever the surface. Looking for mastic applicators who cover Sgalpaigh? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Hotels and care homes around smaller places like Sgalpaigh often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.

- Location
- Sgalpaigh (HS4)
- Region
- Na h-Eileanan Siar
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
When something else is needed
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Construction that lacks the fire resistance the seal relies on
- Openings that need collars, wraps, batts or boards rather than sealant
If in doubt, phone 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
What we seal
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Cable penetrations
Also near Sgalpaigh
More services for Sgalpaigh
Diagnose, treat, sign off
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Tell us who will meet us and how to get in at your building near Sgalpaigh. That goes into the plan alongside the quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Share the asbestos register for older buildings
- Move anything stored against the joints
- Warn occupants and staff about the work
Request a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or email a schedule or drawings.
Read more
FAQs: Sgalpaigh
Do you work on the island where Sgalpaigh is?
Yes, Sgalpaigh is within the area we cover. Our area covers all of Scotland, cities, towns and islands alike. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can you produce the fire-stopping design for a job in Sgalpaigh?
No, that sits with the designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How many days will you need on site?
It depends on the scope, but the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Signs you need fire stopping in Sgalpaigh
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
What tends to prompt an enquiry:
- Fire sealant pulled out of the opening
- Open linear gaps along the top of fire-resisting walls
- Fire-stopping items raised at inspection or handover
- Fire seals cut back for extra cables and never reinstated
Around Sgalpaigh, fire-stopping design belongs to the designer and building control; installation to the specification is our part.
Questions to ask before you book
- Health and safety accreditation such as CHAS
- How they’ll work around occupants
- How long is the guarantee, and what does it include?
- How joint depth will be controlled
Why act early in Sgalpaigh
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Renewing every failing joint on one visit is the sensible approach for a place like Sgalpaigh. Photos of each area help us quote the whole job.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Sgalpaigh
- A fixed quote before work starts
- 12 months’ guarantee on every job
- Health and safety: CHAS accredited
- Constructionline member
See how commercial sealant jobs are priced or how we’re accredited.
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Include service cupboards in routine inspections
- Foam or ordinary sealant is never a fire-seal repair
- Treat an open penetration as a priority repair
- Brief every trade that openings they make must be sealed
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate, and it helps at inspections.
Fire stopping around Sgalpaigh: points for this area
Being on an island, Sgalpaigh means planning around ferry times as well as the weather. We need the specification and a count of penetrations before we sail. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
Around Sgalpaigh, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Sgalpaigh (Gaelic: Scalpay) is in Na h-Eileanan Siar. We cover Sgalpaigh, with the same fixed quotes and 12-month guarantee as everywhere else. Our Na h-Eileanan Siar coverage takes in 87 places, large and small.
We cover the HS4 postcode districts for service penetrations. Close to Sgalpaigh, our area also takes in Plocrapool (3 miles south-west), Drinisiadar (3 miles west), Scadabhagh (3 miles south-west), Miabhaig (4 miles west) and Greosabhagh (4 miles south-west). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.