Fire Stopping in Crewe Toll
Work needed on a service penetration in Crewe Toll? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Seals disturbed by maintenance and left open
- Service penetrations left open after M&E works
Fire stopping for Crewe Toll sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Crewe Toll, done properly
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. We work on small duct penetrations where the tested detail allows, linear gaps at wall heads and cable penetrations, and the usual reasons a site gets in touch are service penetrations left open after M&E works and unsealed penetrations discovered above suspended ceilings. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Crewe Toll is the same: the right product in a properly prepared joint.
Large city estates in Scotland, from universities to hospitals and offices, are re-serviced constantly, and new cabling and pipework through compartment walls is a common reason fire stopping gets breached. New openings are closed with the specified fire-rated product, following its test evidence.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Crewe Toll (EH4, EH5, EH3)
- Region
- Edinburgh
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Surface by surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Commercial clients in Crewe Toll
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.
We work for building owners and managing agents on everything from one building to a spread of sites around Crewe Toll. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Questions we are asked in Crewe Toll
Can work at a site such as University of Edinburgh - Lauriston Campus fit around teaching?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Do you work on fire-rated sealing in hotels in Crewe Toll?
Yes. We install fire-rated and intumescent sealant where it is specified. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Are you insured?
Yes. We are fully insured, including public liability cover.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Also near Crewe Toll
More services for Crewe Toll
Maintenance after handover
Once the work is signed off, a little attention goes a long way:
- Settle who seals which penetrations at the start of a project
- Keep product data and details in the fire safety file
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Report damaged or disturbed seals as soon as they’re spotted
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged and get them dealt with.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
General trades versus a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Compartments and services around Crewe Toll
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Crewe Toll has three care or nursing homes no more than 2 miles away. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. We install fire-rated sealant to the tested detail where it is specified.
Shop fits on retail sites such as Drylaw Shopping Centre (under half a mile west of Crewe Toll) can bring new services through fire-resisting walls between units, to be sealed with the specified product. For a hotel such as Village Hotel, less than half a mile east of Crewe Toll, penetration seals are worth checking after any refit or services upgrade. At a university such as University of Edinburgh - Lauriston Campus, which lies south-east of Crewe Toll, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Crewe Toll is about 2 miles north-west of Edinburgh, in Edinburgh. Anywhere in EH4, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 174 places across Edinburgh fall within our area, including Crewe Toll.
Business premises anywhere in EH4, EH5 and EH3 are within our area for service penetrations. Streets here include Ferry Road, Grigor Avenue and Davidson Road, and sites on any of them can send details for a fixed quote. If your building is just outside Crewe Toll, we cover East Pilton (1 mile south-east), Pilton (1 mile north), Craigleith (1 mile south-east), Drylaw (1 mile south-west) and West Pilton (1 mile north-west). Bigger towns within reach include Leith (3 miles east), Buccleuch (3 miles south-east), Dumbiedykes (3 miles south-east), Sciennes (3 miles south-east), Newington (3 miles south-east) and Queensferry (6 miles west).
What’s near Crewe Toll
Locally, jobs take us to sites close to Starbank Park, Gabrielle Keiller Library and St Columba's Parish Church. Crewe Toll’s nearest station is Haymarket station, roughly 1.7 miles south. Other landmarks nearby include Palestine Museum (1.7 miles south-east) and Craigcrook Castle (1.5 miles south-west). Green spaces nearby include Corstorphine Hill and The New Leaf Co-op.
What affects the price in Crewe Toll
Each job is priced on its own details. The main factors are:
- How accessible the joints are
- The total length or number of joints
- Whether the work must be split into stages
- Travel to remote or island sites
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Details that help us quote
The more we know, the firmer the quote. When you get in touch, include:
- Clear photographs of the problem areas
- Drawings or a marked-up plan, if available
- The product your specification calls for
- Asbestos survey details if the building is older
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
How a job runs
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before we move to the next. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- For older buildings, check the asbestos register before work
- Make sure the joints can be reached
- Tell us your opening times and when work is allowed
Ask for a quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to ring 01277 525 020 or send details through our quote form.