Fire stopping in Collydean
Fire stopping for Collydean, from a contractor working since 2005. Fully insured and CHAS accredited.
- Head-of-wall gaps with no fire seal
- Expanding foam used as fire stopping
- Penetration schedules that need working through
Fire stopping in Collydean
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Deciding what a wall or floor needs, which belongs to the designer
- Construction that lacks the fire resistance the seal relies on
- Signing off or certifying a building’s fire stopping
If you’re not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
How we handle fire stopping in Collydean
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. If you are dealing with fire seals cut back for extra cables and never reinstated and hidden openings found during inspections, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Collydean, preparation and product choice get the time they need.
Travel to smaller places like Collydean is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Collydean (KY7, KY6)
- Wider area
- Fife
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
What the job involves on each surface
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on, so we check each one.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness first.
Questions we’re asked in Collydean
Is a smaller place like Collydean outside your area?
No. Places such as Collydean are covered as much as the big towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
Can you seal penetrations in a hotel in Collydean after a refit?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
What will the job cost?
We don’t publish prices, because every site is different. Send photographs or drawings and we will price it at a fixed figure.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Maintenance after handover
Regular inspection catches problems early. In particular:
- File the specified details where the next contractor can find them
- Get seals inspected before ceilings and boxing close
- Leave fire sealant to cure fully before covering it
- Don’t let anyone top up a fire seal with the wrong product
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.
Where services cross fire walls in Collydean
The area within 2 miles of Collydean holds a number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For a site team at a college like Fife College - Auchmuty Learning Centre, 1.6 miles to the south-east of Collydean, fire-rated sealing is best scheduled after the summer works. For a unit at a site such as Queensway Industrial Estate, 1.2 miles south-east of Collydean, new power or data runs between office and warehouse can breach a compartment wall. In a hotel such as Balgeddie House Hotel (less than half a mile west of Collydean), new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Collydean is about 1 mile north of Glenrothes, in Fife. If you’re looking for fire stopping in Collydean, we can help, as we do across Fife. We work across 132 places in Fife, from busy centres to rural villages. Our Edinburgh page has more on work in that area, about 19 miles away.
Postcode districts covered here: KY7 and KY6 for service penetrations. Streets here include Benvane Road, Dunlin Avenue and Western Avenue, and sites on any of them can send details for a fixed quote. Sites close to Collydean are covered too, including Cadham (1 mile south-east), Markinch (2 miles east), Newton of Falkland (3 miles north), Freuchie (3 miles north-east) and Star (3 miles east). Nearby towns on our patch include Dunfermline (14 miles south-west), Kirkcaldy (6 miles south), Leven (7 miles east), Cowdenbeath (10 miles south-west), Dysart (6 miles south) and Dalgety Bay (14 miles south-west).
What’s near Collydean
We work on buildings around Riverside Park, among other places. Collydean’s nearest station is Markinch station, about 2.3 miles east of the centre. Nearby you’ll also find Kingdom Shopping Centre (1.3 miles south-east) and Strathenry Castle (2.5 miles west). For a walk, there’s East Lomond and Cash Loch.
Leave it or put it right?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail. Around smaller places like Collydean, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
We don’t publish prices, since every building and every scope is different. Call for a quote and we will price your job on its own details.
Why us?
- Commercial sealant work since 2005
- One contact handling all your sites
- 12-month guarantee on workmanship
- Constructionline member
Read what affects the cost and our accreditations and insurance.
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Collydean. That goes into the plan alongside the quote.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Share the asbestos register for older buildings
- Arrange parking or a loading space
- Tell staff and tenants when we will be in
Ask for a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or use the quote form.