Fire-rated sealing and fire stopping in Cleland, North Lanarkshire
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Cleland. Send details for a fixed quote.
- Damaged fire seals in risers and voids
- Non-fire-rated filler around services
- Fire sealant pulled out of the opening
Fire stopping for Cleland sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Cleland
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. Most enquiries involve service penetrations left open after M&E works and head-of-wall gaps with no fire seal, on pipe penetrations, joints between fire-resisting walls and floors and linear gaps at wall heads. A specialist sealant contractor works differently from a general builder: on jobs in Cleland, preparation and product choice get the time they need.
Refurbishments in small hotels, schools and care homes around places like Cleland can leave gaps around new services. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Cleland (ML1)
- Wider area
- North Lanarkshire
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Fire risk assessments, a job for a competent assessor
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Signing off or certifying a building’s fire stopping
If you’re not sure, just speak to us on 01277 525 020 or email us and we’ll give you a straight answer.
Surfaces we seal
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Check risers and ceiling voids after each round of works
- Check with the data sheet before painting over fire sealant
- Settle who seals which penetrations at the start of a project
- Keep general-purpose fillers away from compartment walls
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way unless the designer specifies otherwise.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and the work runs in step with the M&E.
Compartments and services around Cleland
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Workshops and IT rooms at colleges like New College Lanarkshire - Motherwell Campus (to the south-west of Cleland) are re-serviced often, leaving penetrations to seal. For a unit at a site such as Newhouse Industrial Estate, which lies north-west of Cleland, new power or data runs between office and warehouse can breach a compartment wall. Holiday works at schools like St. Aidan's Primary School often leave service openings to seal before pupils return.
Cleland is about 2 miles north of Wishaw, in North Lanarkshire. We cover commercial sites throughout Cleland, for single jobs and planned programmes alike. Across North Lanarkshire, 100 places are covered, Cleland among them. Sites around Glasgow have their own page, roughly 14 miles from Cleland.
Work on service penetrations is covered throughout ML1, for business premises of every kind. If your site is on Main Street, Station Road and Aberlady Street or close by, send details and we’ll quote for service penetrations. If your building is just outside Cleland, we cover Biggar Road (1 mile north), Newarthill (1 mile north-west), Hareshaw (2 miles north), Carfin (2 miles west) and Holytown (2 miles north-west). Nearby towns on our patch include Motherwell (3 miles west), Cumbernauld (11 miles north), Coatbridge (6 miles north-west), Airdrie (5 miles north-west), Bellshill (4 miles west) and Kilsyth (13 miles north-west).
Near you in Cleland
We work on buildings around Coltness High School and the streets around them. Cleland has its own railway station: Cleland station. Other landmarks nearby include Brandon Shopping Centre (3 miles west) and North Lanarkshire Heritage Centre (3.2 miles west). For a walk, there’s Allanton House lake and Baron's Haugh RSPB Reserve.
Also near Cleland
Also in Cleland
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Where we can, we combine work around Cleland with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Tell us which areas need to stay in use
- Tell staff and tenants when we’ll be in
- Share your working hours and any access restrictions
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call 01277 525 020 or send details through our quote form with what you know.
Advice
Common questions from Cleland clients
Is Cleland too far out for you?
No. Places such as Cleland are covered as much as the big towns. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.
Which Scottish guidance covers penetration seals in Cleland?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Are you insured?
Yes. We’re fully insured, including public liability cover.
How much does the work cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we will price it properly.
Do you need to see the site first?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Owners, agents and contractors
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Cleland can form part of a wider programme.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
How the job changes by surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest so we know it sits within the tested range, and any outside it are raised with you.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically.
What sets the cost
These are the things that shape the price:
- Removal of failed or old sealant
- The product specified
- How much there is to seal
- Joint width, depth and condition
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Before you send an enquiry
A few photos plus some basic facts will normally do. Please tell us:
- A wide shot and a close-up of the area
- Drawings or a marked-up plan, if available
- The product your specification calls for
- The type of building and who uses it
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, speak to us on 01277 525 020 or email drawings and photos.