The Mastic Doctor team standing beside their branded vans outside an office building
Isle of Wight · England

Fire stopping in Clatterford

Work needed on a service penetration in Clatterford? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Expanding foam used as fire stopping
  • Seals disturbed by maintenance and left open
  • Fire sealant pulled out of the opening
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
CHAS & Constructionline
£5m public liability

Fire stopping across Clatterford

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

When something else is needed

Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:

  • Large openings beyond what any sealant detail covers
  • Walls or floors that aren’t fire-resisting to begin with
  • Designing or specifying fire stopping, which sits with the designer or fire engineer

If you are not sure, just ring 01277 525 020 or email us and we will give you a straight answer before you book.

What we seal

  • Pipe penetrations
  • Cable penetrations
  • Service gaps in risers
  • Small duct penetrations where the tested detail allows
  • Linear gaps at wall heads
  • Joints between fire-resisting walls and floors

Fire stopping in Clatterford, done properly

We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance in Clatterford and nearby. We work on pipe penetrations, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and what we are called in for most is unsealed openings around new pipes and cables and fire-rated sealant that has cracked or shrunk back. Looking for mastic applicators who cover Clatterford? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.

Rural conversions around Clatterford can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.

What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.

Place
Clatterford (PO30)
Wider area
Isle of Wight
Cover
12 months on every job
Quotes
Fixed quote, scope in writing
Telephone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

Your questions answered

What happens to BS 476 references for fire stopping in Clatterford?

References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.

Is a smaller place like Clatterford outside your area?

No. Small places get the same service as large ones. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.

Do you have public liability insurance?

Yes. Mastic Doctor is fully insured, public liability included.

Can you quote from photos?

That depends on the size and complexity of the job. Simple work can often be priced from photographs, and bigger or more complex jobs normally get a visit.

Can the sealant be colour-matched?

In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.

When can the area be used after sealing?

The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.

How do I request a quote?

You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.

Common problems we fix in Clatterford

Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it and has to be removed.

It’s worth sending us details if you spot any of the following:

  • Damaged fire seals in risers and voids
  • Fire-rated sealant that has cracked or shrunk back
  • Builders’ foam or ordinary silicone in compartment walls
  • Fire-stopping items raised at inspection or handover

Theatres, wards and plant rooms at sites like Laidlaw Day Hospital, 1.8 miles north-east of Clatterford, all have compartment walls crossed by services.

What to look for in a quote

  • Are they CHAS accredited or on Constructionline?
  • How they’ll work around occupants
  • Whether old or failed sealant will be cut out, not overlaid
  • Whether primer will be used where the manufacturer specifies it

Questions to ask before you appoint anyone

On site: what to expect

Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. Jobs in and around smaller places like Clatterford are normally planned as a single visit, so photographs and measurements up front really help. Then the right materials arrive with us.

  1. The specification and schedule come first, so we know which details apply.
  2. We plan the sequence of floors, risers and voids with you.
  3. Each opening is checked for wall or floor type, service, gap and depth.
  4. Foam, ordinary sealant and debris come out so the seal starts clean.
  5. Backing and fire-rated sealant are installed to the detail and tooled.
  6. We tell you about openings that need a different product.

What we need from you

  • Let building users know which areas are affected
  • Send your site hours and access windows
  • Move anything stored against the joints

Quotes

Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email us.

Ask for a quote

Read more

Why act early in Clatterford

An unsealed opening affects more than fire safety: smoke, noise and draughts pass through them every day. The specified fire seal closes the gap for all of these. Halls, stores and units around places like Clatterford may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.

Pricing service penetrations depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.

Why appoint us

  • One number for every site we cover
  • CSCS-carded applicators
  • Clear, fixed quotes
  • Over 20 years of commercial sealing

Take a look at what affects the cost and our accreditations and insurance.

Fire stopping around Clatterford: how the place shapes the job

The 2 miles around Clatterford include four care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. There are several hotels within about 2 miles of Clatterford. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.

Hotels such as Clatterford House (Hotel) (under half a mile west of Clatterford) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. For a unit at a site such as Mountjoy Industrial Estate (0.6 miles east of Clatterford), new power or data runs between office and warehouse can breach a compartment wall.

Clatterford is about 1 mile south-west of Newport, in the Isle of Wight. Across the PO30 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Across the Isle of Wight, 125 places are covered, Clatterford among them. We also cover Portsmouth, around 13 miles from Clatterford.

We take on service penetrations across the PO30 postcode area. Streets here include Down Lane, Castle Lane and High Street. Nearby places we also cover include Carisbrooke (1 mile north), Plaish (1 mile south-west), Gunville (1 mile north), Bowcombe (1 mile south-west) and Gatcombe (2 miles south). Further afield, our area takes in Ryde (7 miles east), Cowes (5 miles north), Sandown (7 miles east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (5 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.

Landmarks near Clatterford

Recent enquiries here include premises near The Waverley pub, Island Innovation VI Form Campus and Christ The King College. A little further out are Whitecroft Hospital (1.3 miles south-east) and Carisbrooke Castle (under half a mile east). The countryside around Clatterford includes Brighstone Down and Briddlesford Nature Reserve.

Map of Clatterford © OpenStreetMap contributors

Doing it in-house

Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.

How the quote is worked out

These are the things that shape the price:

  • Travel to remote or island sites
  • Induction, permit and paperwork requirements
  • The total length or number of joints
  • Access and working height

The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.

What we need to price the job

For an accurate fixed quote, we need to understand the site. Useful things to include:

  • Asbestos survey details if the building is older
  • Access details, including height
  • Your programme or deadline
  • Approximate linear metres or a joint schedule

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.

Accreditations

Trusted. Accredited. Insured.