Fire-rated sealing and fire stopping in Bowcombe, Isle of Wight
Need fire stopping in Bowcombe? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire-stopping items raised at inspection or handover
- Openings left by services added after handover
- Non-fire-rated filler around services
Need fire stopping in Bowcombe?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Different surfaces, different methods
Plastic pipes
Plastic waste pipes through slabs come up often. The detail decides whether sealant alone is enough, and we’ll never swap a specified collar for sealant.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness.
Fire stopping for commercial buildings in Bowcombe
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. We work on cable penetrations, joints between fire-resisting walls and floors and pipe penetrations, and what we are called in for most is unsealed penetrations discovered above suspended ceilings and seals disturbed by maintenance and left open. A specialist sealant contractor works differently from a general builder: on jobs in Bowcombe, preparation and product choice get the time they need.
Barn and farm-building conversions near places like Bowcombe often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Place
- Bowcombe (PO30)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
After the work
For the best life from the joints:
- Agree the fire-stopping specification before services go in
- Check with the data sheet before painting over fire sealant
- Look above ceilings when tiles are lifted for other jobs
- Make fire stopping part of every scope that crosses a fire-resisting wall
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Why act early in Bowcombe
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these, and the other benefits follow. Around Bowcombe, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we will quote for the lot.
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why appoint us
- Fully insured, including public liability cover
- Work to your specification and the manufacturer’s guidance
- Our applicators hold CSCS cards
- 12 months’ guarantee on every job
Fire stopping around Bowcombe: how the place shapes the job
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Bowcombe has a number of hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product.
For a hotel such as Clatterford House (Hotel), 0.9 miles to the north-east of Bowcombe, penetration seals are worth checking after any refit or services upgrade. At a college such as HTP Apprenticeship College, which lies north-east of Bowcombe, checking penetration seals after summer M&E works is good practice. Wherever services are added at a hospital such as Laidlaw Day Hospital, 2.6 miles north-east of Bowcombe, the compartment line has to be made good with the specified product.
Bowcombe is about 2 miles south-west of Newport, in the Isle of Wight. We cover commercial sites throughout Bowcombe, whether it’s a single job or part of a planned programme. Our the Isle of Wight coverage takes in 125 places. Portsmouth is covered too, around 14 miles from Bowcombe.
We take on service penetrations across the PO30 postcode area. Close to Bowcombe, our area also takes in Plaish (1 mile north-east), Clatterford (1 mile north-east), Carisbrooke (1 mile north-east), Gunville (1 mile north-east) and Gatcombe (2 miles south-east). Nearby towns on our patch include Ryde (8 miles east), Cowes (6 miles north), Sandown (8 miles east), Shanklin (8 miles south-east), Ventnor (8 miles south-east) and East Cowes (6 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Local landmarks in Bowcombe
We work on buildings around The Blacksmiths Arms and the streets around them. A little further out are Whitecroft Hospital (1.6 miles east) and Isle of Wight Music Museum (2.3 miles north-east). Green spaces nearby include Brighstone Down.
Towns and villages near Bowcombe
Also in Bowcombe
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Jobs in and around smaller places like Bowcombe are usually planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Warn occupants and staff about the work
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, ring 01277 525 020 or send photos by email.
Related advice
Bowcombe: questions and answers
Can work at a site such as HTP Apprenticeship College fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
How does the move away from BS 476 affect penetration seals in Bowcombe?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
How much does the work cost?
Every job gets its own fixed quote. To get one, call the office on 01277 525 020 or send photos by email with a description of the work.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Walls or floors that aren’t fire-resisting to begin with
- Signing off or certifying a building’s fire stopping
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, call the office on 01277 525 020 or send photos by email and we’ll say what we think before you book.
Where we work in Bowcombe
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations