The Mastic Doctor team standing beside their branded vans outside an office building
Stirling · Scotland

Chartershall fire stopping

Need fire stopping in Chartershall? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Fire stopping installed outside its tested range
  • Unsealed openings around new pipes and cables
  • Old intumescent sealant that has split away
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS accredited
£5m public liability

Fire stopping near Chartershall

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

How we handle fire stopping in Chartershall

We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. Most enquiries involve builders’ foam or ordinary silicone in compartment walls and head-of-wall gaps with no fire seal, across pipe penetrations, service gaps in risers and small duct penetrations where the tested detail allows. A single leaking joint is often how a building in Chartershall first comes to us: we look at the rest while we are there and tell you what we find.

Travel to smaller places like Chartershall is planned so every penetration is sealed on one trip. Send the specification and photos of the openings, with sizes if you have them.

A 12-month guarantee applies to all our work. If an installation problem shows up, give us a call on 01277 525 020 or send details through our quote form and we’ll arrange a return visit.

Place
Chartershall (FK7)
Region
Stirling
Cover
12 months on every job
Quotes
Quoted before any work starts
Phone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Honest limits

Sealant solves a lot, but not everything, and we are upfront when that’s the case. These need a different solution:

  • Signing off or certifying a building’s fire stopping
  • Fire doors, dampers or other fire safety equipment
  • Deciding what a wall or floor needs, which belongs to the designer

If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think before you book.

Surfaces we seal

  • Pipe penetrations
  • Service gaps in risers
  • Small duct penetrations where the tested detail allows
  • Linear gaps at wall heads
  • Cable penetrations
  • Joints between fire-resisting walls and floors

Why it’s worth doing now in Chartershall

An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Chartershall before they leak.

Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.

Why appoint us

  • Workmanship guaranteed for 12 months
  • Constructionline member for supplier checks
  • Commercial sealant work since 2005
  • CSCS-carded applicators

Take a look at what affects the cost or our accreditations.

For managing agents and facilities managers

For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

Different surfaces, different methods

Drylining partitions

Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers first.

Risers and ceiling voids

Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically, and note anything we find that isn’t on it.

Compartment walls and floors in Chartershall

The area within 2 miles of Chartershall holds a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.

Large healthcare estates like BMI Kings Park Hospital (to the north-west of Chartershall) change their services often, so penetration seals are worth checking after M&E work. Tenant changes at parks like Laurelhill Business Park (1.4 miles north of Chartershall) bring new data and services, and openings through fire-resisting walls need the specified seal. Campus buildings at universities such as University of Stirling, 3.9 miles to the north of Chartershall, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.

Chartershall is about 2 miles south of Stirling, in Stirling. Any commercial site in Chartershall is covered, whether it’s a single job or part of a planned programme. 52 places across Stirling fall within our area, including Chartershall. Our Glasgow page has more on work in that area.

We take on service penetrations across the FK7 postcode area, for business premises of every kind. We also cover Broomridge (1 mile east), Borestone (1 mile south), Bannockburn (1 mile east), Dunipace (4 miles south) and Fankerton (5 miles south) for service penetrations. Bigger towns within reach include Dunblane (7 miles north), Raploch (3 miles north), Cornton (3 miles north), Bridge of Allan (4 miles north), Callander (15 miles north-west) and Cowie (3 miles east).

Around Chartershall

Recent enquiries here include premises near Kings Park. For rail, the closest station is Stirling station, roughly 2 miles north. Other landmarks nearby include Stirling Health and Care Centre (1.2 miles north) and Stirling Castle (2.3 miles north). Green spaces nearby include Airthrey Loch and Gillies Hill.

Map of Chartershall © OpenStreetMap contributors

How the quote is worked out

We price every job individually. The things that drive the figure:

  • Specialist products, such as fire-rated or hygienic sealants
  • Site requirements such as inductions and permits
  • Any access equipment needed
  • How much existing material needs removing

The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.

What we need to price the job

For an accurate fixed quote, we need a clear picture of the site. Send us:

  • A wide shot and a close-up of the area
  • Approximate linear metres or a joint schedule
  • Specification clauses that apply
  • The postcode of the building

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.

How a job runs

Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Travel to smaller Scottish places like Chartershall is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.

  1. We ask for the product and detail your designer has specified.
  2. We sort the openings by the detail each one needs.
  3. Old or wrong materials are cut out.
  4. Where the detail needs backing, it goes in at the stated depth.
  5. We gun the sealant in to the specified depth around each service and tool it.
  6. We walk the completed areas with you and confirm the records agreed at quote stage.

Before we start on site

  • Warn occupants and staff about the work
  • Have the specification and drawings to hand
  • Make sure the joints can be reached

Quotes

Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or email the details over.

Get a quick quote

Related advice

Common questions from Chartershall clients

Is a smaller place like Chartershall outside your area?

No. Small places get the same service as large ones. We work across every Scottish council area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.

What do Scotland’s building standards say about service penetrations in Chartershall?

Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.

Can the building stay open while you work?

In most cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.

Do you take on small jobs?

Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.

Do you seal on top of existing sealant?

No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

Can one quote cover more than one building?

Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.

Do you work to architects’ specifications?

Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.

Accreditations

Trusted. Accredited. Insured.