Fire Stopping in Broomridge
Fire stopping for Broomridge, from a contractor working since 2005. Fully insured and CHAS accredited.
- Fire-rated sealant that has cracked or shrunk back
- Seals disturbed by maintenance and left open
- Unsealed penetrations discovered above suspended ceilings
Need fire stopping in Broomridge?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
How we handle fire stopping in Broomridge
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. Site teams most often ask us about seals disturbed by maintenance and left open and penetration schedules that need working through, across cable penetrations, joints between fire-resisting walls and floors and linear gaps at wall heads. Most enquiries from Broomridge start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places such as Broomridge, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
A 12-month guarantee applies to all our work. If an installation problem shows up, call the office on 01277 525 020 or email drawings and photos and we’ll arrange a return visit.
- Where
- Broomridge (FK7)
- Wider area
- Stirling
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the quote is worked out
We price every job individually. The main factors are:
- The product specified
- The site’s rules and procedures
- Joint width, depth and condition
- How much existing material needs removing
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Before you send an enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- The product your specification calls for
- The postcode of the building
- What the building is and how it’s used
- Anything awkward about access or site hours
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send photos by email to discuss it first.
Nearby places to Broomridge
Other services in Broomridge
Common questions from Broomridge clients
Is Broomridge too far out for you?
Not at all. Broomridge is within our area. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Do you cover business parks and estates near Broomridge, such as Thistle Industrial Estate?
Yes. We cover Broomridge and the area around it, including industrial estates, business parks and retail parks such as Thistle Industrial Estate. Photos and a short description are enough for a first look.
How do we ask for a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email us. Include photographs or drawings if you have them.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Is the BS 476 change in 2029 relevant to fire stopping?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, subject to the Government’s transitional arrangements. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
Do the same rules apply to fire stopping in Scotland?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, with proprietary products tested for the end use.
Do you design or specify fire stopping?
No, we don’t design fire stopping. With the designer’s details in hand, we can price the sealant elements, and tell you if a detail needs another product.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Broomridge. We will confirm the plan with the fixed quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Confirm the product named in the specification
- Let us know about inductions and permits
Quotes
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Read more
What we are called out for in Broomridge
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in and later need putting right.
Things that typically lead to an enquiry:
- Fire sealant pulled out of the opening
- Seals that don’t match their tested detail
- Non-fire-rated filler around services
- Hidden openings found during inspections
On a hospital site such as BMI Kings Park Hospital, 1.5 miles to the north-west of Broomridge, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
What your quote should include
- What site paperwork they can supply
- Proof of insurance
- Whether their applicators hold CSCS cards
- Can the work be phased to keep areas open?
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Construction that lacks the fire resistance the seal relies on
- Large openings beyond what any sealant detail covers
- Writing the fire-stopping specification
Not sure which it is? You can call 01277 525 020 or email us and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
Aftercare for building managers
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Include service cupboards in routine inspections
- Check with the data sheet before painting over fire sealant
- Don’t let anyone top up a fire seal with the wrong product
- Arrange inspection before areas are covered up
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, so check the product data first.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
Where services cross fire walls in Broomridge
Broomridge has plenty of hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
At a university such as University of Stirling (3.9 miles north of Broomridge), labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. In a retail centre such as Thistles Centre (1.9 miles north of Broomridge), any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail.
Broomridge is about 2 miles south of Stirling, in Stirling. Anywhere in FK7, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Stirling coverage takes in 52 places, from busy centres to rural villages. For work in that direction, see our Glasgow page (21 miles or so).
If you need fire stopping in FK7, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Whins Road, Milton Road and Bryden Road or nearby, we can quote for service penetrations. With the A872 nearby, Broomridge is easy to get to with materials and equipment. Sites close to Broomridge are covered too, including Chartershall (1 mile west), Bannockburn (1 mile east), Borestone (1 mile south-west), Dunipace (4 miles south) and Fankerton (5 miles south). Further afield, our area takes in Dunblane (7 miles north), Raploch (3 miles north), Cornton (3 miles north), Bridge of Allan (4 miles north), Callander (15 miles north-west) and Cowie (3 miles east).
What’s near Broomridge
For rail, the closest station is Stirling station, roughly 2.1 miles north of the centre. A little further out are Stirling Castle (2.4 miles north) and Stirling Smith Museum and Art Gallery (2.1 miles north). Green spaces nearby include Gillies Hill and Airthrey Loch.