Fire Stopping in Carndu
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Carndu and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Fire sealant pulled out of the opening
- Damaged fire seals in risers and voids
- Head-of-wall gaps with no fire seal
Fire stopping for businesses in Carndu
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Carndu
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you have openings found when ceilings come down for a refit and seals disturbed by maintenance and left open, we can help, on pipe penetrations, cable penetrations and service gaps in risers alike. Whether you call it commercial sealant work, mastic application or joint sealing, in Carndu it comes down to the same thing: the right product in a properly prepared joint.
Travel to smaller places like Carndu is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Carndu (IV40)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Carndu
Each job is priced on its own details. The things that drive the figure:
- The site’s rules and procedures
- Whether the work must be split into stages
- Specialist products, such as fire-rated or hygienic sealants
- Quantities, in metres or numbers
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
Sending details for a quote
A good diagnosis starts with the right details. Let us know:
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- Specification clauses that apply
- What the building is and how it’s used
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email us.
Towns and villages near Carndu
Other services in Carndu
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Brief every trade that openings they make must be sealed
- Include service cupboards in routine inspections
- Ask the designer to confirm details early on refits
- Treat an open penetration as a priority repair
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned, and installation follows the programme.
When to bring in a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Compartment walls and floors in Carndu
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. We install what’s specified, to the product’s tested detail.
For a building such as St Duthuc's Roman Catholic Chapel, new heating or data runs are the usual reason penetrations need sealing. For a unit at a site such as Ardelve Industrial Estate, 1 mile to the south-west of Carndu, new power or data runs between office and warehouse can breach a compartment wall. In a hotel such as Dornie Hotel (0.8 miles south-west of Carndu), new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Carndu is in Highland. Anywhere in IV40, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Across Highland, 256 places are covered, including Carndu.
Business premises anywhere in IV40 are within our area. Streets here include Helen Street, Princes Street and William Street. Close to Carndu, our area also takes in Bundalloch (1 mile north-east), Dornie (1 mile south-west), Auchtertyre (3 miles west), Inverinate (5 miles south-east) and Reraig (5 miles west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call 01277 525 020 or email a schedule or drawings.
Local landmarks in Carndu
The nearest railway station is Stromeferry station, roughly 4.8 miles north-west of the centre. Well-known places in the area include Eilean Donan Castle (1.1 miles south-west). Open spaces near Carndu include Loch Anna.
Building owners, agents and FMs in Carndu
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Carndu can form part of a wider programme across Highland.
Questions about Carndu
Does your area include sites such as Ardelve Industrial Estate, near Carndu?
Yes. We cover Carndu and the area around it, including industrial estates, business parks and retail parks such as Ardelve Industrial Estate. A few photographs and the unit address let us price the work.
Is Carndu too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Do you certify or sign off fire stopping?
No. Sign-off belongs to the designer or building control, not the installer. We will confirm the product and detail installed, and you can tell us what other records you need at quote stage.
Can you reseal penetrations after our M&E works?
Yes, where there is a specification for those walls and floors. New services after M&E works often breach existing seals and we close them with the specified product.
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Writing the fire-stopping specification
- Walls or floors that aren’t fire-resisting to begin with
- Approving the work on behalf of building control
If you are not sure, just give us a call on 01277 525 020 or use the quote form and we will give you a straight answer.
Where we work in Carndu
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For work around Carndu, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
- Make sure the joints can be reached
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.