Fire stopping in Auchtertyre
Fire-rated and intumescent sealing of service penetrations and linear gaps in Auchtertyre and across Highland. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Damaged fire seals in risers and voids
- Unsealed joints where partitions meet the slab
- Openings found when ceilings come down for a refit
Fire stopping in Auchtertyre
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How a job runs
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. Tell us who will meet us and how to get in at your building near Auchtertyre. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Preparing the site
- Have the specification and drawings to hand
- Explain the parking and delivery arrangements
- Let building users know which areas are affected
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email the details over.
Read more
Fire stopping in Auchtertyre
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. If you are dealing with seals that don’t match their tested detail and head-of-wall gaps with no fire seal, we can help, on linear gaps at wall heads, small duct penetrations where the tested detail allows and pipe penetrations alike. A single leaking joint is often how a building in Auchtertyre first comes to us: we look at the rest while we are there and tell you what we find.
For a building near Auchtertyre, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Auchtertyre (IV40)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Commercial clients in Auchtertyre
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Why it’s worth doing now in Auchtertyre
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail. For buildings near Auchtertyre, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
There’s no price list, since every building and every scope is different. Call for a quote.
Why us?
- One number for every site we cover
- A Constructionline member, so easy to vet
- Workmanship guaranteed for 12 months
- Old sealant cut out, never sealed over
Compartment walls and floors in Auchtertyre
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Older community buildings such as Lochalsh Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification. For a hotel such as Balmacara Hotel, 1.5 miles to the west of Auchtertyre, penetration seals are worth checking after any refit or services upgrade.
Auchtertyre is in Highland. We cover commercial sites throughout Auchtertyre. Auchtertyre is one of 256 places in Highland on our list.
Business premises anywhere in IV40 are within our area. With the A87 nearby, Auchtertyre is straightforward for us to reach. Nearby places we also cover include Reraig (1 mile west), Balmacara (2 miles west), Dornie (3 miles east), Carndu (3 miles east) and Bundalloch (4 miles east) for service penetrations. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or email a schedule or drawings.
Around Auchtertyre
Auchtertyre’s nearest station is Duncraig station, about 3.9 miles north-west. Nearby you’ll also find Eilean Donan Castle (2.9 miles east). Open spaces near Auchtertyre include Loch a' Ghlinne Dhuirch and Glas Bheinn.
Other services in Auchtertyre
Auchtertyre: questions and answers
What do Scotland’s building standards say about service penetrations in Auchtertyre?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is Auchtertyre off your patch?
Not at all. Auchtertyre is within our area. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Can you work while the building is occupied?
In the majority of cases, yes. We phase the work so most of the building stays in use, with each area protected and signed.
What do you charge?
Every job gets its own fixed quote. For yours, call the office on 01277 525 020 or email drawings and photos with a description of the work.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Signs you need fire stopping in Auchtertyre
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
These are often picked up first by site or facilities staff:
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
- Fire-rated sealant that has cracked or shrunk back
- Seals that don’t match their tested detail
On a site such as Lochalsh Business Park, under half a mile to the south-east of Auchtertyre, every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product.
What to look for in a quote
- What site paperwork they can supply
- Whether their applicators hold CSCS cards
- How the existing material will be dealt with
- How the joint faces will be prepared and primed
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Issuing fire ratings or certificates for seals
- Fire risk assessments, a job for a competent assessor
If you’re not sure, just speak to us on 01277 525 020 or email the details over and we will give you a straight answer before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors