Bogside fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps in Bogside. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Service penetrations left open after M&E works
- Old intumescent sealant that has split away
Fire stopping in Bogside
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Surface by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers and the installation has to fit inside those limits.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness.
Fire stopping for commercial buildings in Bogside
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in. We work on joints between fire-resisting walls and floors, cable penetrations and small duct penetrations where the tested detail allows, and the failures we’re asked to look at most are openings left by services added after handover and openings found when ceilings come down for a refit. A single leaking joint is often how a building in Bogside first comes to us: we look at the rest while we’re there and tell you what we find.
Refurbishments in small hotels, schools and care homes around places like Bogside can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Where
- Bogside (ML2)
- Wider area
- North Lanarkshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
After the work
Regular inspection catches problems early. In particular:
- Keep product data and details in the fire safety file
- Settle who seals which penetrations at the start of a project
- Leave fire sealant to cure fully before covering it
- Look above ceilings when tiles are lifted for other jobs
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open instead of being left for someone else.
Leave it or put it right?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. For buildings near Bogside, dealing with all the failing joints at once saves return trips. Send photos and we’ll quote for everything together.
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
Why appoint us
- Joints cleaned back to sound surfaces
- 12-month guarantee on workmanship
- Public liability insurance in place
- One phone line for London, the South East and Scotland
Read what affects the cost and how we’re accredited.
Fire-rated sealing for Bogside buildings
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install fire-rated sealant to that tested detail where it is specified.
Industrial units on estates such as Castlehill Industrial Estate, 1.7 miles to the south-east of Bogside, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. For a hospital such as University Hospital Wishaw, which lies west of Bogside, penetration sealing is usually phased ward by ward, with infection-control rules agreed first. Holiday works at schools like Coltness High School often leave service openings to seal before pupils return.
Bogside is about 2 miles south-east of Wishaw, in North Lanarkshire. Bogside sits inside our coverage and the rest of North Lanarkshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 100 places across North Lanarkshire fall within our area, including Bogside. Sites around Glasgow have their own page, roughly 17 miles from Bogside.
Business premises anywhere in ML2 are within our area for service penetrations. Nearby places we also cover include Chapel (1 mile north-east), Wildmanbridge (1 mile south), Morningside (1 mile north), Law (1 mile south-west) and Cambusnethan (1 mile north-west) for service penetrations. Nearby towns on our patch include Motherwell (5 miles north-west), Cumbernauld (14 miles north), Coatbridge (9 miles north-west), Airdrie (8 miles north-west), Bellshill (7 miles north-west) and Viewpark (9 miles north-west).
Near you in Bogside
For rail, the closest station is Wishaw station, roughly 2.3 miles west. Nearby you’ll also find Murdostoun Castle (2.1 miles north) and Law Hospital (0.6 miles south-east). Green spaces nearby include Baron's Haugh RSPB Reserve and Allanton House lake.
On site: what to expect
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Bogside, we aim for one trip, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Share your working hours and any access restrictions
- Arrange parking or a loading space
- Send any specification or drawings in advance
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call 01277 525 020 or email us.
Read more
Common questions from Bogside clients
Which Scottish guidance covers penetration seals in Bogside?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you cover business parks and estates near Bogside, such as Castlehill Industrial Estate?
Yes. We cover Bogside and the area around it, including industrial estates, business parks and retail parks such as Castlehill Industrial Estate. A few photos and the unit address let us price the work.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
Can the sealant be colour-matched?
It depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What affects the price in Bogside
Your fixed quote is built from the real scope. It allows for:
- Whether the work must be split into stages
- Induction, permit and paperwork requirements
- Joint width, depth and condition
- Location, for remote and island sites
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
What to include in your enquiry
A few photographs plus some basic facts will normally do. Please tell us:
- The type of building and who uses it
- Clear photos of the problem areas
- Anything awkward about access or site hours
- Where the site is, with the postcode
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or send photos by email.
What sealant work can’t fix
Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
- Openings that need collars, wraps, batts or boards rather than sealant
If you are not sure, just give us a call on 01277 525 020 or use the quote form and we will give you a straight answer.
What we seal
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows