Balgreen fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Balgreen, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Fire seals cut back for extra cables and never reinstated
- Service penetrations left open after M&E works
- Openings found when ceilings come down for a refit
Need fire stopping in Balgreen?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Do you need fire stopping in Balgreen?
Some service penetrations were never sealed at all. Inspections, refurbishments and ceiling access typically bring them to light.
Common reasons buildings call us in:
- Open linear gaps along the top of fire-resisting walls
- Damaged fire seals in risers and voids
- Builders’ foam or ordinary silicone in compartment walls
- Fire-stopping items raised at inspection or handover
For a unit at a site such as West Gorgie Park Industrial Estate (1 mile south-east of Balgreen), new power or data runs between office and warehouse can breach a compartment wall.
What your quote should include
- Are they CHAS accredited or on Constructionline?
- Can the work be phased to keep areas open?
- The named product and why it was chosen
- What level of public liability insurance do they hold?
How we handle fire stopping in Balgreen
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and pipe penetrations, and the failures we’re asked to look at most are seals disturbed by maintenance and left open and service penetrations left open after M&E works. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Balgreen is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Under Scotland’s building standards, a service penetration should keep at least the fire resistance duration of the wall or floor it passes through. For a building in Balgreen, specified fire-rated sealant is installed as the maker’s tested detail describes.
We stand by our work with a 12-month guarantee. That covers our preparation and application.
- Where
- Balgreen (EH12, EH11, EH4)
- Wider area
- Edinburgh
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be any of the following:
- Openings that need collars, wraps, batts or boards rather than sealant
- Construction that lacks the fire resistance the seal relies on
- Signing off or certifying a building’s fire stopping
If in doubt, phone 01277 525 020 or email drawings and photos and we will say what we think.
What we seal
- Service gaps in risers
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
Compartment walls and floors in Balgreen
A 2-mile radius around Balgreen takes in plenty of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Seven care or nursing homes sit less than 2 miles from Balgreen. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. We install fire-rated sealant to the tested detail where it is specified.
Hotels like Twin Lions Hotel (less than half a mile north-east of Balgreen) are refurbished in phases, and each phase can open up compartment walls. On a hospital site such as Spire Murrayfield Hospital, which lies west of Balgreen, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Balgreen is about 2 miles west of West End, in Edinburgh. We cover Balgreen and the rest of Edinburgh, with the same fixed quotes and 12-month guarantee as everywhere else. Our Edinburgh coverage takes in 174 places, large and small.
Business premises anywhere in EH12, EH11 and EH4 are within our area. Among the streets we cover are Whitson Road, Baird Avenue and Balgreen Road, and sites on any of them can send details for a fixed quote. Being close to the A8, Balgreen is straightforward for us to reach. Nearby places we also cover include Beechmount (1 mile north), Saughtonhall (1 mile east), Murrayfield (1 mile north-east), Westfield (1 mile south-east) and Stenhouse (1 mile south). Bigger towns within reach include Leith (4 miles north-east), Bonnington (4 miles north-east), Greenside (3 miles east), Broughton (3 miles east), Bellevue (3 miles north-east) and Buccleuch (3 miles east).
What’s near Balgreen
Recent enquiries here include premises near Gabrielle Keiller Library, St Columba's Parish Church and Roseburn Bar and the streets around them. You’ll also find Saughton Park (0.6 miles south-east), Balgreen Primary School (0.5 miles south-east) and St George's School (1.1 miles north-east). For rail, the closest station is Slateford station, roughly 1.2 miles south-east. Nearby you will also find Murrayfield Experience (0.6 miles east) and Corstorphine Hospital (0.6 miles west). For a walk, there’s Dunsapie Loch and The New Leaf Co-op.
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Ask which product is in place before decorating
- Make fire stopping part of every scope that crosses a fire-resisting wall
- File the specified details where the next contractor can find them
- Get seals inspected before ceilings and boxing close
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
Surface by surface
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
FAQs: Balgreen
Can work at a site such as Edinburgh Napier University fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Will you work in a care home in Balgreen without moving residents out?
Yes. Care settings are planned area by area, at times agreed with the home. Any site rules, from signing in to infection control, are agreed before we start.
Do you work in Scotland as well as England?
Scotland sets its own building regulations, with Technical Handbooks. Wherever the site is, our work follows the specification and the tested detail.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
Do you have third-party installer accreditation for fire stopping?
No, and we’d rather be clear about that. Some clients require third-party installer schemes even though the law doesn’t, so check your contract first. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
Is colour matching possible?
It depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
What happens if it’s left?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these and the building feels the difference. Failed sealant in a shared building in Balgreen can affect more than one owner, which makes early repair simpler for everyone. Fixing it promptly keeps repairs small.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why us?
- Old sealant cut out, never sealed over
- CHAS accredited contractor
- Fully insured
- Over 20 years of commercial sealing
See how commercial sealant jobs are priced or our accreditations.
Also near Balgreen
More services for Balgreen
Our process
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and our waste is bagged and taken away as we go. City jobs in Balgreen normally need parking and loading planned. Tenement closes, shared stairs and factor approvals may also be involved.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Send your site hours and access windows
- Arrange parking or a loading space
- Move anything stored against the joints
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email us.