Fire Stopping in Auldearn
Fire-rated and intumescent sealing of service penetrations and linear gaps in Auldearn. CHAS accredited and fully insured, with a 12-month guarantee.
- Seals disturbed by maintenance and left open
- Penetration schedules that need working through
- Open linear gaps along the top of fire-resisting walls
Fire stopping for businesses in Auldearn
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Your questions answered
Is hospital work, at somewhere like Nairn Town and County Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will you take on work at estates like Grigorhill Industrial Estate, close to Auldearn?
Yes, sites like Grigorhill Industrial Estate are within our area, along with the rest of Auldearn. Photos and a short description are enough for a first look.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Do you design or specify fire stopping?
No. The specification comes from your designer, fire engineer or building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
How many days will you need on site?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Fire stopping for commercial buildings in Auldearn
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we will confirm with the quote. Most enquiries involve old intumescent sealant that has split away and service penetrations left open after M&E works, across service gaps in risers, pipe penetrations and small duct penetrations where the tested detail allows. Looking for mastic applicators who cover Auldearn? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Travel to smaller places like Auldearn is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Work we carry out in Highland comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or send details through our quote form and we’ll come back to it.
- Where
- Auldearn (IV12)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. For work around Auldearn, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Agree which areas must stay open
- Tell us what induction or permit system the site runs
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Related advice
When to call us in Auldearn
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Look out for the following:
- Unsealed penetrations discovered above suspended ceilings
- Fire stopping installed outside its tested range
- Builders’ foam or ordinary silicone in compartment walls
- Penetration schedules that need working through
For a unit at a site such as Grigorhill Industrial Estate, 1.4 miles west of Auldearn, new power or data runs between office and warehouse can breach a compartment wall.
Comparing quotes
- Proof of insurance
- The named product and why it was chosen
- Health and safety accreditation such as CHAS
- Do they follow the manufacturer’s priming guidance?
Looking after the joints
Cleaning and maintenance staff play a part too. Pass these on to them:
- Foam or ordinary sealant is never a fire-seal repair
- Treat an open penetration as a priority repair
- Leave fire sealant to cure fully before covering it
- Have penetrations checked while they can still be seen
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job compared with dozens found at once.
What else we do in Auldearn
Service penetrations in Auldearn buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For a building such as Auldearn Church, new heating or data runs are the usual reason penetrations need sealing. On a hospital site such as Nairn Town and County Hospital (2.4 miles west of Auldearn), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Auldearn is about 2 miles east of Nairn, in Highland. Businesses, contractors and managing agents in Auldearn can call on us for service penetrations. Our Highland coverage takes in 256 places. Our Aberdeen page has more on work in that area.
Commercial sites across IV12 are covered. Buildings on High Street, Church Road and Innes Terrace are within our area for service penetrations. Sites close to Auldearn are covered too, including Kingsteps (2 miles north-west), Nairn (2 miles west), Cawdor (4 miles south-west), Dyke (5 miles north-east) and Mundole (6 miles east). A short drive away, we cover Cradlehall (14 miles south-west), Fortrose (12 miles west), Culloden (14 miles south-west), Cromarty (11 miles north-west), Avoch (14 miles west) and Westhill (15 miles south-west). For island and remote sites, we plan travel and materials carefully.
Local landmarks in Auldearn
Auldearn’s nearest station is Nairn station, roughly 2.4 miles west of the centre. A little further out are Nairn Fishertown Museum (2.3 miles west) and Nairn Town and County Hospital (2.4 miles west). The countryside around Auldearn includes Loch Loy and Hill of Urchany.
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Auldearn can sit alongside others in a wider programme across Highland.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Large openings beyond what any sealant detail covers
- Fire doors, dampers or other fire safety equipment
- Writing the fire-stopping specification
If you are not sure, just give us a call on 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Where we work in Auldearn
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
Quoting for work in Auldearn
What shapes the price:
- Induction, permit and paperwork requirements
- The product specified
- Quantities, in metres or numbers
- Location, for remote and island sites
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- The site address and postcode
- Approximate linear metres or a joint schedule
- How the joints are reached, and at what height
- Clear photographs of the problem areas
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.