Facade Sealing contractors in Auchtertyre
Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Auchtertyre. Send details for a fixed quote.
- Old perimeter mastic that has dried out
- Cold air coming in at window perimeters
- New sealant peeling off old mastic
Facade sealing across Auchtertyre
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
We follow your site rules from the start: signing in, inductions and any permit to work. Once we are cleared to begin, we take the joints in the sequence agreed with you. For a building near Auchtertyre, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We plan access and the order of elevations with the client.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- Let building users know which areas are affected
- Confirm the product named in the specification
- Point out any areas we must not close
Quotes
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
How we handle facade sealing in Auchtertyre
Facade joints are the line of defence between the weather and the building fabric. Once a perimeter seal fails, water tracks in around frames and panels. We remove failed sealant and install a new bead chosen for the joint and how far it moves. We work on shopfront frames, cladding panel joints and coping and flashing joints, and the usual reasons a site gets in touch are cladding panel joints that have opened up and leaks at window and door perimeters. One point of contact handles commercial sealant work in Auchtertyre from the first photographs to the final walk-round, whether it’s one building or several.
Construction around smaller Scottish places like Auchtertyre is often one-off schemes: a school, a health centre, a hotel extension or a few houses. Exposed elevations in Scotland put facade and perimeter joints to work from day one, so the sealant choice matters.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Auchtertyre (IV40)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Other services in Auchtertyre
Your questions answered
Is a smaller place like Auchtertyre outside your area?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.
Does your area include sites such as Lochalsh Business Park, near Auchtertyre?
Yes. Our area takes in Auchtertyre and its surroundings, with estates and business parks such as Lochalsh Business Park included. A few photographs and the unit address let us price the work.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Will you check whether the sealant is causing the leak?
Yes. We look at the perimeter sealant and tell you whether it has failed before quoting. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
How is access to upper-level joints handled?
Access is planned with you before we quote. Tell us about access: existing scaffold, what you’re arranging and any site restrictions, and the quote will reflect it.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Building and refurbishing in Auchtertyre
Auchtertyre is within about 1 mile of the coast. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. Auchtertyre is on Scotland’s wetter western side. Outside mastic is booked around the forecast, and internal sealing fills the gaps.
New units and refits on sites such as Lochalsh Business Park (to the south-east of Auchtertyre) need their panel and perimeter joints sealed to the specification.
Auchtertyre is in Highland. Businesses, contractors and managing agents in Auchtertyre use us for work on facade joints. Auchtertyre is one of 256 places in Highland on our list for facade joints.
Commercial sites across IV40 are covered for facade joints. Auchtertyre sits on or close to the A87, which helps when planning parking and deliveries for the job. Just outside Auchtertyre, we also work in Reraig (1 mile west), Balmacara (2 miles west), Dornie (3 miles east), Carndu (3 miles east) and Bundalloch (4 miles east). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Near you in Auchtertyre
For rail, the closest station is Duncraig station, about 3.9 miles north-west. Well-known places in the area include Eilean Donan Castle (2.9 miles east). For a walk, there’s Loch a' Ghlinne Dhuirch and Glas Bheinn.
How the job changes by surface
Perimeter joints at frames and structure
Perimeter joints at frames often show their age first. They are cut out, cleaned, backed and resealed.
Precast concrete panels
Concrete edges can be dusty or weak. We clean back to sound material and flag edges that need repair.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Replacing glass or failed glazing units
- Movement beyond what any sealant can handle
- Cracked or spalling substrates that need repair before sealing
Not sure which it is? You can give us a call on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
What we seal
- Stone and brick facade joints
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Shopfront frames
- Window and door perimeters
- Coping and flashing joints
Common problems we fix in Auchtertyre
When the sealant tears down its centre, it has normally been asked to move more than it can. Too thin a bead, too narrow a joint or a product with the wrong movement class are common reasons.
Most enquiries start with one or more of the following:
- Patch repairs that keep failing
- Air leaks through failed facade joints
- Sealant pulling away from frames or panels
- Perimeter joints where frames meet the structure
Hotels like Balmacara Hotel (1.5 miles west of Auchtertyre) rarely close for long, so refurbishment mastic is phased floor by floor.
What to look for in a quote
- How joint depth will be controlled
- What level of public liability insurance do they hold?
- How the joint faces will be prepared and primed
- How the existing material will be dealt with
Quoting for work in Auchtertyre
What shapes the price:
- Quantities, in metres or numbers
- Which sealant the job calls for
- Location, for remote and island sites
- Removal of failed or old sealant
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Access details, including height
- Approximate linear metres or a joint schedule
- The postcode of the building
- When you need the work done
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.