Ashey fire stopping
Fire stopping for Ashey, from a contractor working since 2005. Fully insured and CHAS accredited.
- Unsealed joints where partitions meet the slab
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
Need fire stopping in Ashey?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Ashey
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal rather than guesswork. Most enquiries involve service penetrations left open after M&E works and snag lists that include open service penetrations, on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and cable penetrations. Looking for mastic applicators who cover Ashey? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
For a smaller site near Ashey, we plan to do all the penetrations in one go, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Work we carry out in the Isle of Wight comes with a 12-month guarantee. If an installation problem shows up, phone 01277 525 020 or send details through our quote form and we’ll arrange a return visit.
- Location
- Ashey (PO33)
- Region
- Isle of Wight
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Doing it in-house
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Common problems we fix in Ashey
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
If one of these sounds familiar, it’s time for a closer look:
- Unsealed openings around new pipes and cables
- Fire-stopping items raised at inspection or handover
- Old intumescent sealant that has split away
- Openings found when ceilings come down for a refit
Holiday works at schools like Ryde Academy often leave service openings to seal before pupils return.
Before you book anyone
- Whether primer will be used where the manufacturer specifies it
- Will CSCS-carded applicators be on site?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- The terms of the workmanship guarantee
Nearby places to Ashey
What else we do in Ashey
Where services cross fire walls in Ashey
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. There are two care or nursing homes within about 2 miles of Ashey. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail.
On a site such as Ryde Business Park, 1.8 miles to the north-east of Ashey, every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product. On a hospital site such as Arthur Webster Memorial Hospital for Children, 4.4 miles south of Ashey, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Ashey is about 2 miles south-west of Ryde, in the Isle of Wight. We send applicators to Ashey for service penetrations, handled exactly as we handle every other area. Our the Isle of Wight coverage takes in 125 places, from busy centres to rural villages. There’s a separate page for Portsmouth, about 9 miles away.
Anyone looking for fire stopping in PO33 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Adgestone (2 miles south-east), Brading (2 miles south-east), Morton (2 miles south-east), Alverstone Garden Village (2 miles south) and Yarbridge (2 miles south-east) for service penetrations. Bigger towns within reach include Newport (5 miles west), Cowes (7 miles north-west), Sandown (3 miles south), Shanklin (5 miles south), Ventnor (7 miles south) and East Cowes (6 miles north-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call 01277 525 020 or send details through our quote form.
Local landmarks in Ashey
For rail, the closest station is Smallbrook Junction station, roughly 1.5 miles north-east of the centre. A little further out are Sandown Castle (3.3 miles south-east) and Cothey Bottom Heritage Centre (2 miles north-east). The countryside around Ashey includes Briddlesford Nature Reserve and Brading Down.
Cost factors for service penetrations
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- How accessible the joints are
- The size and state of each joint
- Site requirements such as inductions and permits
- Phasing around occupants
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a quote when you’re ready.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- Whether an asbestos survey exists
- Any dates the work must fit around
- Any specification or named product
- The site address and postcode
For a fixed quote, ring 01277 525 020 or send details through our quote form with the site address and an outline of the work. You can also send details through our quote form.
Different surfaces, different methods
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Your questions answered
Can you work in a care home near Ashey with residents in?
Yes. We work around residents’ routines, a room or two at a time. Any site rules, from signing in to infection control, are agreed before we start.
How does the move away from BS 476 affect penetration seals in Ashey?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Why it’s worth doing now in Ashey
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. Older rural buildings around Ashey move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
What you get with us
- Old sealant cut out, never sealed over
- Work to your specification and the manufacturer’s guidance
- Workmanship guaranteed for 12 months
- Sealing commercial buildings since 2005
From enquiry to sign-off
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. If others near Ashey need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Agree which areas must stay open
- Let building users know which areas are affected
- Tell us what induction or permit system the site runs
Quotes
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.