Aberargie fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Aberargie and the surrounding area. Send photographs or drawings for a fixed quote.
- Improvised or mixed-product fire seals
- Unsealed joints where partitions meet the slab
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping in Aberargie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Cost factors for service penetrations
A fixed quote reflects the actual work. It allows for:
- The size and state of each joint
- Induction, permit and paperwork requirements
- How much there is to seal
- Whether the work must be split into stages
A quote for service penetrations depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Anything awkward about access or site hours
- Approximate linear metres or a joint schedule
- The site address and postcode
- Any specification or named product
To get a fixed quote, call the office on 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Fire stopping in Aberargie
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on service gaps in risers, joints between fire-resisting walls and floors and linear gaps at wall heads, and the failures we are asked to look at most are head-of-wall gaps with no fire seal and fire-stopping items raised at inspection or handover. For commercial sealant work in Aberargie, you deal with one contact from quote to sign-off, whether it’s one building or several.
In smaller Scottish places like Aberargie, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Aberargie (PH2)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Why it’s worth doing now in Aberargie
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed, so earlier action pays back. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Aberargie, a repair visit takes planning, so it’s better to act early.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why choose Mastic Doctor in Aberargie
- Fully insured, including public liability cover
- Failed material removed, not covered up
- One contact handling all your sites
- Products installed to the manufacturer’s instructions
Read our cost guide and how we’re accredited.
Also in Aberargie
Looking after the joints
To get the most from the new sealant:
- Check with the data sheet before painting over fire sealant
- Flag new cables with no seal around them
- File the specified details where the next contractor can find them
- Include service cupboards in routine inspections
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Deciding what a wall or floor needs, which belongs to the designer
- Signing off or certifying a building’s fire stopping
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just call 01277 525 020 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
Penetration seals near Aberargie
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
Theatres, wards and plant rooms at sites like Bridge of Earn Hospital (1.9 miles north-west of Aberargie) all have compartment walls crossed by services. For buildings in and around Aberargie, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Aberargie is about 6 miles south-east of Perth, in Perth and Kinross. We cover Aberargie, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 114 places in Perth and Kinross, large and small. We also cover Dundee, some 17 miles away.
Business premises anywhere in PH2 are within our area. We also cover Abernethy (2 miles east), Bridge of Earn (2 miles north-west), St Madoes (4 miles north-east), Tarsappie (4 miles north-west) and Glenfarg (4 miles south-west). A short drive away, we cover Perth (6 miles north-west), Auchterarder (14 miles west), Kinross (9 miles south), Letham (7 miles north-west), Scone (7 miles north) and Tulloch (7 miles north-west).
Local landmarks in Aberargie
Other landmarks nearby include Bridge of Earn Hospital (1.9 miles north-west) and Museum of Abernethy (1.6 miles east). Green spaces nearby include Pitcairlie Hill.
Your questions answered
Can you work on a hospital site such as Bridge of Earn Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Which Scottish guidance covers penetration seals in Aberargie?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Can staff carry on working while you are here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
What will the job cost?
We don’t publish prices, because every site is different. Send photographs or drawings and we will price it at a fixed figure.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Aberargie is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Make sure the joints can be reached
- Explain the parking and delivery arrangements
- Tell us which areas need to stay in use
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or use the quote form.
Related advice
Different surfaces, different methods
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point against the detail’s limits, and any outside it are raised with you.