Facade and window perimeter sealing in Reraig, Highland
Sealant work in Reraig for main contractors, managing agents and facilities managers: facade joint and window perimeter sealing on commercial buildings, quoted at a fixed price.
- Old perimeter mastic that has dried out
- Damp patches beside frames after rain
- Failed sealant on precast panel joints
Facade sealing across Reraig
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Where we can, we combine work around Reraig with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Facade-grade sealant goes in and is tooled to a tidy concave profile.
- Once signed off, the work carries our 12-month guarantee.
Getting the site ready
- Tell us your opening times and when work is allowed
- Make sure the joints can be reached
- Agree which areas must stay open
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send details through our quote form.
Related advice
How we handle facade sealing in Reraig
Some clients need every window on a block resealed; others need a few leaking frames sorted. The approach doesn’t change with the size: cut out, clean, back, prime where needed and seal. A 12-month guarantee applies to our workmanship. If you have perimeter joints where frames meet the structure and gaps between rainscreen or cladding panels, we can put it right, on shopfront frames, perimeter joints where frames meet the structure and coping and flashing joints alike. A single leaking joint is often how a building in Reraig first comes to us: we look at the rest while we’re there and tell you what we find.
For a site around Reraig, we plan the mastic in as few trips as the programme allows. Clear drawings, a programme and photographs let us bring the right sealants, primers and backing rod first time.
Every job we finish is backed by a 12-month workmanship guarantee, in Reraig as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Reraig (IV40)
- Wider area
- Highland
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Why it’s worth doing now in Reraig
Resealing a few window perimeters is a small job; repairing water-damaged interiors and fixings is not. Leaks travel along the structure, so the real damage is often some distance away. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Reraig before they leak.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
What you get with us
- Sealing commercial buildings since 2005
- Constructionline member for supplier checks
- Coloured sealants to suit the setting, where available
- Our applicators hold CSCS cards
Take a look at our cost guide or our accreditations.
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Don’t wait for a second leak before calling
- Combine resealing with other works that need access
- Walk the elevations once or twice a year
- Avoid harsh cleaners on facade sealant
Keep gutters, sills and drainage paths clear. Sealant copes better when water runs off the facade as designed instead of soaking the joints.
Use each reseal to correct the joint: correct depth, proper backing and a sealant that can take the movement. A well-designed joint lasts longer than a like-for-like copy of a failed one.
Places near Reraig
More services for Reraig
What sets the cost
There’s no standard rate for sealant work, because every site is different. What we look at:
- How much existing material needs removing
- Distance, for remote addresses
- Access and working height
- The site’s rules and procedures
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- Whether an asbestos survey exists
- Approximate linear metres or a joint schedule
- The product your specification calls for
- What the building is and how it’s used
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email drawings and photos.
Questions we are asked in Reraig
Is Reraig too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. We plan jobs in smaller places so return trips are kept to a minimum.
Will you take on work at estates like Lochalsh Business Park, close to Reraig?
Yes. Our area takes in Reraig and its surroundings, with estates and business parks such as Lochalsh Business Park included. A few photographs and the unit address let us price the work.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Do you provide access for facade work?
That varies with the building and the access on offer. When you give us a call on 01277 525 020 or send photos by email, describe the access, and we will agree the approach together.
Is it okay to overlay old mastic?
No. New sealant won’t hold on old sealant, so the old bead is cut away and the joint cleaned back to sound material. Nothing else gives a bond that lasts.
Can you work while the building is occupied?
In most cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Building and refurbishing in Reraig
Reraig lies within about 1 mile of the sea. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, and the sealant, primer and backing need choosing with that in mind. Projects in Reraig follow Scotland’s building regulations, with the local authority acting as verifier. We seal to the specification that sits behind the warrant.
Work at a hotel such as Balmacara Hotel, under half a mile to the west of Reraig, tends to be programmed around bookings, mastic included. New units and refits on sites such as Lochalsh Business Park (to the east of Reraig) need their panel and perimeter joints sealed to the specification.
Reraig is in Highland. Reraig sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Reraig is one of 256 places in Highland on our list.
We take on facade joints across the IV40 postcode area. Sites close to Reraig are covered too, including Balmacara (1 mile north-west), Auchtertyre (1 mile east), Kyle of Lochalsh (3 miles west), Drumbuie (3 miles north-west) and Erbusaig (4 miles west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Around Reraig
For rail, the closest station is Kyle of Lochalsh station, roughly 3.3 miles west. Nearby you will also find Duncraig Castle (3.8 miles north) and Bright Water Visitor Centre (3.9 miles west). For a walk, there’s Loch Iain Oig and Glas Bheinn.
Commercial clients in Reraig
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Surface by surface
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. These joints take full exposure to weather, so preparation and product choice matter.
Perimeter joints at frames and structure
These frame-to-structure joints take a lot of movement and weather. We cut them out, prepare both faces and reseal to the specification with a product suited to glazing perimeters.