Coloured Sealant in Reraig
Sealant work in Reraig for main contractors, managing agents and facilities managers: coloured and colour-matched sealant for visible joints, with a fixed quote first.
- Old sealant that has yellowed, darkened or faded
- Old colour-matched joints lifting at the edges
- Hotel refurbishments with a set colour scheme
Coloured sealant near Reraig
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How a job runs
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. For a building near Reraig, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- For older buildings, check the asbestos register before work
- Explain the parking and delivery arrangements
- Flag any permit to work we’ll need
Request a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or send details through our quote form.
Related advice
Coloured sealant in Reraig, done properly
Where colour is critical, a sample bead in a discreet spot settles the question. Cured sealant may look a shade different from the wet bead, and lighting changes it again, so approving a sample on site is worth doing. Tell us who needs to approve the colour and we will plan for it. Site teams most often ask us about old sealant that has yellowed, darkened or faded and smeared sealant on stone or joinery, on hotel bathrooms and public areas, shop-fit joinery and counters and office fit-out finishes. Most enquiries from Reraig start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Scottish weather decides a lot about outside work in a place like Reraig: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Internal joints can be done whatever the day brings.
Work we carry out in Highland comes with a 12-month guarantee. Should something we installed fail, phone 01277 525 020 or send photos by email and we’ll come back to it.
- Place
- Reraig (IV40)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Also near Reraig
More services for Reraig
Why deal with it now?
A standard colour is quicker to source, though not always right. On visible work, the small extra effort of a colour from the product’s range pays off at handover. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Reraig before they leak.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- RAL and finish matching where the product range allows
- Colour options checked against the specified product
- CHAS accredited contractor
- A Constructionline member, so easy to vet
Your questions answered
Is Reraig off your patch?
No. Places such as Reraig are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Our building in Reraig is near the coast: does that change the sealant?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Do you take on colour-matched sealant for shop fits and multi-site roll-outs?
Yes. Send the specification or colour reference. Tell us your site hours and access windows and we will plan around them.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
How do I request a quote?
You can use the quote form on this site; alternatively, give us a call on 01277 525 020 or email a schedule or drawings. Include photos or drawings if you have them.
Common problems we fix in Reraig
Sometimes the wrong colour went in at the start. The joint may work perfectly but look out of place, and a client or designer asks for it to be redone.
These are often picked up first by site or facilities staff:
- Standard-colour sealant spoiling a high-end finish
- Sealant that no longer suits recoated frames
- Old colour-matched joints lifting at the edges
- Hotel refurbishments with a set colour scheme
A hotel such as Balmacara Hotel (to the west of Reraig) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Comparing quotes
- Health and safety accreditation such as CHAS
- Is the sealant right for the movement and the substrate?
- How joint depth will be controlled
- How they’ll work around occupants
How the quote is worked out
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- Site requirements such as inductions and permits
- Whether old sealant has to be cut out first
- Distance, for remote addresses
There’s no price list, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
What to include in your enquiry
Diagnosis starts before we arrive. Tell us:
- Photos of the joints, close up and from further back
- The product your specification calls for
- The site address and postcode
- Whether the building will be occupied during the work
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, give us a call on 01277 525 020 or email the details over.
Coloured sealant around Reraig: what changes locally
Reraig lies within about 1 mile of the sea. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Sea-facing elevations are normally where failed joints show first. The west of Scotland, where Reraig is, gets more rain than the east. External joints are sealed on dry days, with some flexibility in the dates.
Premises within reach of Kyle of Lochalsh station (to the west of Reraig) often have busy frontages where joints are seen by everyone passing. On a business park such as Lochalsh Business Park, 1.5 miles to the east of Reraig, sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters.
Reraig is in Highland. We send applicators to Reraig for colour-matched joints. Reraig is one of 256 places in Highland on our list for colour-matched joints.
Commercial sites across IV40 are covered for colour-matched joints. Sites close to Reraig are covered too, including Balmacara (1 mile north-west), Auchtertyre (1 mile east), Kyle of Lochalsh (3 miles west), Drumbuie (3 miles north-west) and Erbusaig (4 miles west). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near Reraig
The nearest railway station is Kyle of Lochalsh station, about 3.3 miles west of the centre. Other landmarks nearby include Duncraig Castle (3.8 miles north) and Bright Water Visitor Centre (3.9 miles west). Open spaces near Reraig include Loch Iain Oig and Glas Bheinn.
Owners, agents and contractors
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.