Reraig commercial sealant contractors
Planning work on a sealant joint in Reraig? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Gaps behind commercial kitchen worktops and sinks
- Damp patches where an external joint has failed
- Hardened, chalky sealant on south-facing or exposed elevations
Commercial sealant contractors in Reraig
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Doing it in-house
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
How we handle commercial sealant contractors in Reraig
Sometimes a split bead is a symptom rather than the cause. Water at a window perimeter might be coming from the frame, the cill or the wall behind, and repeated splits in a movement joint can mean the joint is too narrow for the movement. Part of the job is telling you when the fix is something other than sealant, so nobody pays for a reseal that can’t hold. The enquiries we see most involve layers of sealant, all of them failing and wall and floor joints that have lost their seal, on kitchen worktops and splashbacks, washrooms and tea points and movement joints in walls and floors. Searching for sealant specialists in Reraig? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Occupied buildings in Reraig need the work phased: washrooms in turn, floors in sections and entrances kept open.
Travel to smaller places such as Reraig is planned so the whole job is finished in one visit where possible, so it helps to have photographs and a full list first. Several jobs nearby can also be put together.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- Reraig (IV40)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Movement joints in walls and floors
A trafficked floor joint needs a different product from a wall joint. We will recommend the right filler or sealant for the traffic and movement; if the arrises are broken, we will say so before sealing.
Shop fronts and retail fit-outs
Most shops can’t close for a reseal. We plan around the access windows the store gives us, working in sections where that helps.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Tell us who will meet us and how to get in at your building near Reraig. We will confirm the plan with the fixed quote.
- You send photographs, drawings or a list of the joints and areas involved, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- Before anything is cut out, we agree access, timings and sequence.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
- Tell us your opening times and when work is allowed
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or use the quote form if you’d rather talk the job through.
Related advice
Why it’s worth doing now in Reraig
Some low prices are low because nothing gets cut out. Sealing over looks tidy at handover, then lifts once the joint starts moving. Every quote we give includes full removal and preparation, because that’s what makes the new bead last. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
We don’t publish prices, since every building and every scope is different. Call for a quote.
Why choose Mastic Doctor in Reraig
- CHAS accredited
- Constructionline member for supplier checks
- Standard and matched colours in many product ranges
- Old sealant cut out, never sealed over
Take a look at how commercial sealant jobs are priced or how we’re accredited.
Commercial sealant contractors around Reraig: what changes locally
The sea is no more than about 1 mile from Reraig. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Sea-facing elevations are usually where failed joints show first. The west of Scotland, where Reraig is, gets more rain than the east. Frontage work is booked with a few days’ give for the weather. Shopfronts and frames facing the prevailing weather are where failures show first
For tenants and agents on sites such as Lochalsh Business Park, 1.5 miles east of Reraig, office fit-outs, reception joints and window perimeters are the usual sealant work. A hotel such as Balmacara Hotel (to the west of Reraig) shows how much sealant a hospitality building has on show, from bathroom joints to the bar. Shops and cafés around stations like Kyle of Lochalsh station, 3.3 miles west of Reraig, trade from early, so work is timed around them.
Reraig is in Highland. We cover Reraig and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Highland, 256 places are covered, including Reraig.
Postcode districts covered here: IV40 for sealant joints. If your building is just outside Reraig, we cover Balmacara (1 mile north-west), Auchtertyre (1 mile east), Kyle of Lochalsh (3 miles west), Drumbuie (3 miles north-west) and Erbusaig (4 miles west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or use the quote form.
Near you in Reraig
Reraig’s nearest station is Kyle of Lochalsh station, about 3.3 miles west. A little further out are Duncraig Castle (3.8 miles north) and Bright Water Visitor Centre (3.9 miles west). Open spaces near Reraig include Loch Iain Oig and Glas Bheinn.
Nearby places to Reraig
More services for Reraig
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Broken glass or blown double-glazed units
- Roof leaks that only look like a joint problem
- Walls or slabs moving more than any sealant can take
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we’ll tell you honestly.
Surfaces we seal
- Window and door perimeters
- External facade joints
- Floor and threshold joints
- Kitchen worktops and splashbacks
- Washrooms and tea points
- Movement joints in walls and floors
Common questions from Reraig clients
Can you work at a site such as Lochalsh Business Park, by Reraig?
Yes, sites like Lochalsh Business Park are within our area, along with the rest of Reraig. To start, just speak to us on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Reraig off your patch?
No. Places such as Reraig are covered as much as the big towns. We work across every Scottish council area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Is it OK to apply fresh sealant over existing beads?
Removal of the failed sealant is always part of the job. Laying new silicone on old gives it nothing to grip, and the faces are brought back to sound, dry material before resealing.
Which site documents can you send us?
We confirm documents at quote stage: RAMS, an insurance certificate and CSCS details are the usual requests. Every applicator holds a CSCS card.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.
Cost factors for sealant joints
These are the things that shape the price:
- Location, for remote and island sites
- Whether the work must be split into stages
- The size and state of each joint
- Site requirements such as inductions and permits
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- Any dates the work must fit around
- Whether the building will be occupied during the work
- Rough lengths or quantities, or drawings if you have them
- A wide shot and a close-up of the area
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.