Facade Sealing in Rattar
Commercial sealant work in Rattar for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, with a fixed quote first.
- Weathered joints at frame-to-structure perimeters
- Facade joints cracked through the middle
- Discoloured or dirty facade joints
Facade sealing in Rattar
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Building owners, agents and FMs in Rattar
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
How we handle facade sealing in Rattar
Weather decides a lot in facade sealing. The sealant needs a dry joint and temperatures inside the maker’s limits, so frosty or damp mornings can hold work back. We build that into the programme and tell you if the forecast changes the plan. If you have unsightly perimeter sealant on a visible elevation and failed seals around shopfront and entrance frames, we can help. Looking for mastic applicators who cover Rattar? We’ve been sealing commercial buildings since 2005.
For a site around Rattar, we plan the mastic in as few trips as the programme allows. Send drawings, photographs and the programme so everything needed arrives on the first day.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Rattar (KW14)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Cost factors for facade joints
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- The total length or number of joints
- Distance, for remote addresses
- Which sealant the job calls for
- Backing rod, priming and other preparation
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a quote when you’re ready.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Access details, including height
- Specification clauses that apply
- Your programme or deadline
- The asbestos register, for older buildings
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.
Maintenance after handover
A few simple habits keep the new joints working:
- Report water ingress at frames as soon as it shows
- Clear debris that holds water against joints
- Insist on a full cut-out when joints are renewed
- Add perimeter sealant to planned maintenance checks
Blocked sills and gutters push water at the joints. Sealant copes better when water runs off the facade as designed.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones inside the building.
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Specialist high-level access methods
- Work on the window or framing system itself
- Damaged frames that need replacing
If in doubt, speak to us on 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
Where we work in Rattar
- Perimeter joints where frames meet the structure
- Stone and brick facade joints
- Coping and flashing joints
- Window and door perimeters
- Cladding panel joints
- Shopfront frames
Places near Rattar
What else we do in Rattar
On site: what to expect
Tell us your site hours and access windows and we’ll plan around them. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Jobs near Rattar are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We look at the joints, the drawings and the access before pricing.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- The new sealant goes in and is tooled firmly onto both faces.
- The completed runs are checked with you, then the 12-month guarantee applies.
Before we start on site
- Tell us what induction or permit system the site runs
- Let building users know which areas are affected
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call the office on 01277 525 020 or send photos by email if you’d rather talk the job through.
Related advice
Rattar: questions and answers
Is a smaller place like Rattar outside your area?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Does a coastal location like Rattar affect which sealant is used?
It can. Coastal exposure works external joints harder than inland weather. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are you CHAS accredited?
Yes. We’re CHAS accredited and a Constructionline member.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Can you find out why a window is leaking?
Yes. Photos are often enough to start, followed by a visit if needed. Many frame leaks are sealant failures, though not all.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards.
Contractors’ notes for Rattar
Rattar lies within about 1 mile of the sea. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. Rattar is on Scotland’s drier eastern side. Winter mornings can still bring frost and condensation on steel and glass. External mastic is planned with the site manager for workable conditions.
With historic properties like Castle of Mey (1.6 miles east of Rattar) in the area, refurbishment work often meets old masonry that needs compatible sealants. Work at a hotel such as Castle Arms Hotel (to the east of Rattar) tends to be programmed around bookings, mastic included.
Rattar is about 10 miles east of Thurso, in Highland. Anywhere in KW14, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 256 places in Highland, large and small.
Anyone looking for facade sealing in KW14 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Scarfskerry (1 mile north-west), Dunnet (3 miles south-west), Brough (3 miles west), Canisbay (5 miles east) and Castletown (5 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or send photos by email.
What’s near Rattar
A little further out are Castle of Mey (1.6 miles east) and Westside Croft (3.2 miles west). Not far away are Loch of Mey.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.