Ottershaw facade sealing
Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Ottershaw and the surrounding area. Send details for a fixed quote.
- Leaks at window and door perimeters
- Cladding panel joints that have opened up
- Air leaks through failed facade joints
Facade sealing for Ottershaw sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Movement beyond what any sealant can handle
- Damp caused by condensation inside the building
- Providing access systems for the work
If in doubt, call 01277 525 020 or email drawings and photos and we’ll say what we think.
Where we work in Ottershaw
- Coping and flashing joints
- Shopfront frames
- Window and door perimeters
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Stone and brick facade joints
Facade sealing in Ottershaw, done properly
A good facade joint depends on design as much as product. The width has to suit the expected movement and the sealant’s movement capability, while rod fixes the depth and stops the bead sticking to the rear, often at around 2:1 width to depth, as the manufacturer advises. We work on stone and brick facade joints, shopfront frames and perimeter joints where frames meet the structure, and the usual reasons a site gets in touch are staining on stone next to old sealant and sealant pulling away from frames or panels. Searching for sealant specialists in Ottershaw? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Building work in places the size of Ottershaw is typically small-scale: a handful of new houses, barn conversions, a school or hall extension. Small schemes still need window perimeters, facade joints and internal sealant done to the specification.
A 12-month guarantee applies to all our work in Surrey. If an installation problem shows up, call the office on 01277 525 020 or send photos by email and we will arrange a return visit.
- Place
- Ottershaw (KT16)
- Region
- Surrey
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
After the work
A few simple habits keep the new joints working:
- Check that rainwater leaves the facade the way it was designed to
- Don’t wait for a second leak before calling
- Inspect facade joints on a regular cycle
- Share access with other external trades
Keep a note of which product went in and when. It helps when matching repairs or planning the next reseal without guesswork.
In pre-2000 buildings, check the asbestos register before old sealant is cut out. Older sealants can contain asbestos, and work stops until it’s tested if it’s suspected.
What sets the cost
What shapes the price:
- Any access equipment needed
- Whether old sealant has to be cut out first
- The site’s rules and procedures
- Working within restricted access windows
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you’re ready.
What we need to price the job
Diagnosis starts before we arrive. Tell us:
- Approximate linear metres or a joint schedule
- When you need the work done
- Access details, including height
- Photos of the joints, close up and from further back
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Questions about Ottershaw
Could you schedule work at a campus like Royal Holloway University for the vacation?
Yes, holiday working periods are the norm on campus jobs. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Is Ottershaw too far out for you?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work on upper floors?
We agree access with the client at the start. Let us know what access is in place or planned.
What type of sealant goes on window perimeters?
Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Other services in Ottershaw
Building and refurbishing in Ottershaw
Ottershaw sits in one of the drier corners of the country, the South East. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, which is why external dates are agreed with the site manager. Ottershaw is about 21 miles from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, and each scheme needs its mastic sealed to programme.
When a college such as Brooklands Technical College - Weybridge Campus (to the east of Ottershaw) builds or refurbishes, the mastic package typically has to fit around students and staff. Projects at schools like Ottershaw Christchurch Church of England Junior School work to term dates, so mastic is programmed tightly. Units on estates such as Hanworth Lane Business Park, 1.7 miles to the north-east of Ottershaw, tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal.
Ottershaw is about 4 miles west of Weybridge, in Surrey. Looking for facade sealing in Ottershaw? We can help, as we do across Surrey. Ottershaw is one of 379 places we cover in Surrey. We also cover Reading, some 20 miles away.
We cover the KT16 postcode districts for facade joints. We cover commercial and managed buildings on Ottermead Lane, Chaworth Close and Crawshaw Road. Sites close to Ottershaw are covered too, including Row Town (1 mile east), Stonehill (1 mile west), Woodham (1 mile south-east), Lyne (2 miles north) and Chertsey (2 miles north-east). A short drive away, we cover Guildford (8 miles south), Woking (4 miles south-west), Camberley (9 miles west), Epsom (11 miles east), Ewell (12 miles east) and Egham (5 miles north).
Local landmarks in Ottershaw
We work on buildings around Jubilee High School and White Lodge Children's Centre. The closest station to Ottershaw is Chertsey station, about 1.9 miles north-east. A little further out are The Hockey Museum (3.3 miles south) and St. Peter's Hospital (1 mile north). For a walk, there’s St Ann's Lake and St Ann's Hill.
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a job in Ottershaw, the main thing is a clear picture of the work. You’ll then get a fixed price for the work.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Getting the site ready
- Confirm the product named in the specification
- Agree which areas must stay open
- Flag any permit to work we’ll need
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or send photos by email with what you know.
Related advice
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Building owners, agents and FMs in Ottershaw
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.