Construction and new-build mastic in Ottershaw, Surrey
Mastic packages for new-build and refurbishment projects across Ottershaw, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Existing joints on a refurb that need cutting out and resealing
- Cracks opening in caulked internal joints
- Oversized or tapered gaps around new frames
Construction mastic near Ottershaw
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Construction mastic in Ottershaw
Mastic is often where a new building first shows its quality to the client. Untidy or missed joints are among the commonest snag items. Our aim is joints that pass at the first inspection, whatever the size of the scheme. If you are dealing with bath and shower joints scraped during the final clean and a long mastic snag list close to completion, we can put it right. Whether you call it commercial sealant work, mastic application or joint sealing, in Ottershaw it comes down to the same thing: the right product in a properly prepared joint.
In a smaller place such as Ottershaw, construction tends to mean small housing schemes, conversions and extensions to community buildings. Small schemes still need window perimeters, facade joints and internal sealant done to the specification.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Place
- Ottershaw (KT16)
- Region
- Surrey
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Ottershaw
Does your area include sites such as Hanworth Lane Business Park, near Ottershaw?
Yes, sites like Hanworth Lane Business Park are within our area, along with the rest of Ottershaw. Photos and a short description are enough for a first look.
Is Ottershaw off your patch?
No. Places such as Ottershaw are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Do you do fire-rated sealing on new builds?
Fire-rated sealant can be included where it’s specified, installed to the product’s tested detail. The design and sign-off belong to the designer, fire engineer or building control.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
How many days will you need on site?
That varies with the scale of the job, though a typical visit usually takes a day or two on a small fit-out and several weeks on a large multi-storey package. Larger or phased jobs take longer, and we will give you a timescale with the quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
Other services in Ottershaw
Mastic packages on Ottershaw sites
At about 21 miles from central London, Ottershaw is within reach of the capital. Towns within reach of London tend to keep building, from flats to offices and schools, so mastic packages have to keep pace with busy programmes. Rainfall across the South East, Ottershaw included, is lower than in many parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so external mastic is timed for workable conditions and agreed with the site manager.
On a campus such as Royal Holloway University, 4.6 miles to the north of Ottershaw, new teaching buildings and residences are normally built and refurbished around the academic year. Projects at colleges like Brooklands Technical College - Weybridge Campus, 2.8 miles to the east of Ottershaw, tend to run to term dates, so the mastic is planned tightly.
Ottershaw is about 4 miles west of Weybridge, in Surrey. Any commercial site in Ottershaw is covered, for single jobs and planned programmes alike. Ottershaw is one of 379 places we cover in Surrey. For work in that direction, see our Reading page.
We cover the KT16 postcode districts for mastic packages. Streets here include Ottermead Lane, Chaworth Close and Crawshaw Road. We also cover Row Town (1 mile east), Stonehill (1 mile west), Woodham (1 mile south-east), Lyne (2 miles north) and Chertsey (2 miles north-east). Further afield, our area takes in Guildford (8 miles south), Woking (4 miles south-west), Camberley (9 miles west), Epsom (11 miles east), Ewell (12 miles east) and Egham (5 miles north).
Around Ottershaw
Locally, jobs take us to sites close to Jubilee High School and White Lodge Children's Centre. The closest station to Ottershaw is Chertsey station, roughly 1.9 miles north-east of the centre. A little further out are The Hockey Museum (3.3 miles south) and St. Peter's Hospital (1 mile north). Green spaces nearby include St Ann's Lake and St Ann's Hill.
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Location, for remote and island sites
- The product specified
- Whether the work must be split into stages
- Site requirements such as inductions and permits
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
What to include in your enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Approximate linear metres or a joint schedule
- Specification clauses that apply
- The asbestos register, for older buildings
- Photos of the joints, close up and from further back
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
When to call us in Ottershaw
Three-sided adhesion is a frequent fault on new work. Bonded to the base of the joint and both sides, sealant can’t stretch evenly so we set the depth properly before sealing.
Most enquiries start with one or more of the following:
- Bath and shower joints scraped during the final clean
- A mastic package split between trades with no clear owner
- New external sealant already peeling away
- Caulk cracking where joints are moving more than expected
Units on estates such as Hanworth Lane Business Park (1.7 miles north-east of Ottershaw) tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal.
Before you book anyone
- Whether old or failed sealant will be cut out, not overlaid
- Proof of insurance
- Is the sealant right for the movement and the substrate?
- How they’ll work around occupants
From enquiry to sign-off
Occupied buildings need a little choreography. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. Several jobs near Ottershaw can be grouped on one trip. Tell us your site hours and we will plan around them.
- We price from the drawings, specification and programme you send.
- We return a fixed quote that ties the mastic package to your programme.
- Any site paperwork you need (RAMS, insurance certificate, CSCS details) is confirmed with the quote.
- We seal each plot or floor as it’s released to us.
- Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
- Snags are cleared before handover and completed areas carry our 12-month guarantee.
Getting the site ready
- Make sure the joints can be reached
- Let building users know which areas are affected
- Flag any permit to work we’ll need
Ask for a quote
For a fixed quote, speak to us on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
Surface by surface
Bathrooms, en suites and washrooms
In bathrooms and washrooms, an anti-mould sanitary silicone goes around every fitting. Each joint is prepared, sealed and finished with a neat tooled line and baths are loaded where appropriate before sealing.
Snagging before handover
Snags typically come from damage by following trades, missed joints or poor earlier work. Snagging can be included or priced separately.
When it isn’t the sealant
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Specifying the product where the designer hasn’t
- Defective windows, doors or glazing units (the supplier or installer’s job)
- Fire-stopping design or sign-off (that’s for the designer, fire engineer and building control)
If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think.
Where we work in Ottershaw
- Brick and block movement joints
- Cladding and panel joints
- Floor and skirting junctions
- Sanitary and kitchen joints
- Internal decorators’ caulk
- Window and door perimeters
Why it’s worth doing now in Ottershaw
When a package runs over budget, downgrading the product is a common first thought. A failed joint in the defects period costs far more than the product difference, especially externally. We price the specified product and will tell you plainly where an alternative would or wouldn’t work. Small buildings around Ottershaw suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a fixed quote once you have the details.
What you get with us
- One number for every site we cover
- Colours confirmed for the specified product
- Clear, fixed quotes
- 12-month guarantee on workmanship
Read our cost guide or how we’re accredited.