Facade Sealing in New Forest
Looking for facade sealing in New Forest? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Air leaks through failed facade joints
- Leaks at window and door perimeters
- Weathered facade joints that have lost their grip
Facade sealing for businesses in New Forest
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How a job runs
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself typically taking a day or two for a few elevations, and longer where access has to be moved around the building. Rural sites near New Forest may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- We plan access and the order of elevations with the client.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Joints are cleaned, primed if required and fitted with backing rod.
- Facade-grade sealant goes in and is tooled to a tidy concave profile.
- We hand over with our 12-month workmanship guarantee.
Preparing the site
- Tell us your opening times and when work is allowed
- For older buildings, check the asbestos register before work
- Point out parking and an unloading spot
Ask for a quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, ring 01277 525 020 or send photos by email.
Read more
Facade sealing in New Forest, done properly
Facade sealants sit in the sun, rain and frost every day, so they don’t last indefinitely. How long a joint lasts depends on the movement it takes, its exposure, the product and how well it was installed. When the time comes, we cut the old sealant out completely and start again. Most enquiries involve water coming in around window frames and gaps between rainscreen or cladding panels, on shopfront frames, window and door perimeters and coping and flashing joints. Whoever orders the work in New Forest, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In the countryside around places like New Forest, conversion schemes put new frames into old stone, flint, brick or timber. A product that grips an irregular face, with a colour that suits the building’s character, is usually what’s needed.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Where
- New Forest (SP6)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
When to call us in New Forest
New sealant run over old sealant rarely holds. Fresh silicone won’t stick to cured silicone, and the patch soon lifts.
Clients typically get in touch after noticing something like this:
- Hard, chalky sealant that no longer flexes
- Previous reseals run over old sealant
- Leaks at window and door perimeters
- Gaps between rainscreen or cladding panels
A facade joint near New Forest lasts when width, depth and backing are right, not just the finish.
What your quote should include
- Whether primer will be used where the manufacturer specifies it
- What site paperwork they can supply
- Can the work be phased to keep areas open?
- Is the sealant right for the movement and the substrate?
Work for main contractors and building owners
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Facade sealing in New Forest: the local picture
New Forest sits in one of the drier corners of the country, the South East. Winter mornings still bring frost and condensation on frames and panels, so the external programme keeps a little slack.
Sites around New Forest get mastic sealed to the drawings and the programme, nothing improvised.
New Forest is in Hampshire. Any commercial site in New Forest is covered, for single jobs and planned programmes alike. 723 places across Hampshire fall within our area, New Forest among them. Our Southampton page has more on work in that area (23 miles or so).
If you need facade sealing in SP6, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Sillens Lane and Townsend Lane are within our area for facade joints. Sites close to New Forest are covered too, including Martin (1 mile north-east), Rockbourne (3 miles east) and Damerham (3 miles south-east). Nearby towns on our patch include Ringwood (11 miles south-east), Fordingbridge (6 miles south-east), St Leonards (11 miles south), Alderholt (6 miles south-east), Poulner (11 miles south-east) and Ashley Heath (10 miles south).
Around New Forest
Well-known places in the area include Cranborne Castle Hill (4.4 miles south). For a walk, there’s Western Downs.
Your questions answered
Which documents can you supply for work in New Forest?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Is a smaller place like New Forest outside your area?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you find out why a window is leaking?
Yes. We look at the perimeter sealant and tell you whether it has failed before quoting. If the water seems to come from a roof, sill or the glazing unit instead, we say so.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Do you install glazing systems?
No. A glazing contractor handles that. What we seal are the joints around frames and panels on commercial buildings.
Is it okay to overlay old mastic?
No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely and the joint cleaned back to sound material. Nothing else gives a bond that lasts.
What type of sealant goes on window perimeters?
The product follows the joint’s movement, the surfaces and the specification. BS EN 15651 Parts 1 and 2 cover facade and glazing sealants, and specifications often name them, and we work to what is specified.
Places near New Forest
More services for New Forest
How the quote is worked out
There’s no standard rate for sealant work, because every site is different. What we look at:
- Induction, permit and paperwork requirements
- The size and state of each joint
- Working within restricted access windows
- Whether old sealant has to be cut out first
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote when you’re ready.
Before you send an enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Photos of the joints, close up and from further back
- Anything awkward about access or site hours
- The type of building and who uses it
- Approximate linear metres or a joint schedule
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, call 01277 525 020 or email drawings and photos.
Why act early in New Forest
Patch repairs over old sealant tend to come back. A full cut-out and fresh bead is the repair that holds and avoids repeat call-outs. Halls, stores and units around places like New Forest may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we will price your job on its own details.
Why us?
- Our applicators hold CSCS cards
- CHAS accredited
- Failed material removed, not covered up
- RAL and finish matching where the product range allows
Take a look at our cost guide or our accreditations and insurance.