Hampshire · England
Commercial sealant contractors in SP6
We cover every part of the SP6 postcode district, including Fordingbridge, Alderholt and Ashford. Failed sealant is always cut out completely, with a 12-month guarantee.
Sealant contractors for SP6
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Where we work in SP6
- Fordingbridge
- Alderholt
- Ashford
- Sandleheath
- Woodgreen
- Damerham
- Frogham
- Tinkers Cross
- Sandy Balls
- Blissford
- Breamore
- Godshill
- Horseport
- Hyde
- Lower Burgate
- North Charford
- Criddlestyle
- Hale
- Hatchet Green
- Martin
- New Forest
- North Gorley
- Upper Burgate
- Hungerford
- Rockbourne
- South Gorley
- Stuckton
- Upper Street
- Whitsbury
- Broxhill
What we do in SP6
- Expansion and movement joint sealing
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Mastic sealing for building owners and managing agents
- Industrial and floor joint sealing
- Facade and window perimeter sealing
- Fire-rated sealing and fire stopping
- Commercial sealant contractors
- Commercial washroom and wet-area sealing
- See all services
Let us know the job and your postcode for a fixed quote: call the office on 01277 525 020 or email us.
Districts next door
Elsewhere in Hampshire
Towns and villages in Hampshire
Every area we cover
How commercial sealant contractors works in SP6
If you look after more than one building, a single sealant contractor saves a lot of chasing. We take on one-off reseals, runs of jobs across a portfolio and planned maintenance programmes, run the same way on every site: send details, get a fixed quote, we seal, and a 12-month guarantee once it’s signed off. To get a programme moving in SP6, call the office on 01277 525 020 or send details through our quote form with the site addresses. The enquiries we see most involve messy, uneven beads from earlier work that let the building down and mouldy silicone around WCs, urinals and vanity tops, on window and door perimeters, washrooms and tea points and movement joints in walls and floors.
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off.
- We begin with whatever information you have, whether that’s photos, a drawing or a list of locations.
- Next comes a diagnosis and a fixed quote.
- Before anything is cut out, we agree access, timings and sequence.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
Pricing in SP6
We don’t publish prices, since every building and every scope is different. Call for a quote.
Why appoint us
- Matching to RAL references, product permitting
- Our applicators hold CSCS cards
- CHAS accredited
- A range of standard colours, depending on the product
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email drawings and photos.
Near you in Fordingbridge
Recent enquiries here include premises near The Burgate School and Sixth Form, Fordingbridge Junior School and The Ship Inn and the streets around them. Well-known places in the area include Godshill Castle Hill (1.6 miles north-east) and Fordingbridge Museum (less than half a mile south-east). Green spaces nearby include Blashford Lakes and Linbrook Lake.
Commercial sealant contractors across SP6: the area picture
In SP6, much commercial sealant work follows refits in shops, offices and hotels in places such as Fordingbridge, Alderholt and Ashford. Visible joints call for a matched colour and a clean tooled finish.
The South East has large numbers of business parks and industrial estates, especially around the motorway corridors, and we cover SP6 along with the rest of the region.
Fordingbridge: Trade counters and showrooms on estates such as Arch Farm Industrial Estate, less than half a mile to the north of Fordingbridge, need neat joints where customers see them. If you have premises on more than one site, say at Arch Farm Industrial Estate and Fordingbridge Business Park, one contractor and one quote can cover both.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Leave it or put it right?
Fixing joints complaint by complaint is a costly way to manage sealant. A planned programme groups work by building or area, cuts repeat visits and gives you a budget figure. We can help you prioritise, starting with the joints most likely to let water in.
Comparing quotes
- Who will actually carry out the work
- Health and safety accreditation such as CHAS
- What the guarantee covers, and for how long
- Their plan for phasing and protecting the area
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Report cracked or peeling sealant early
- Brief cleaning contractors to avoid scourers and blades on sealant
- On pre-2000 buildings, share the asbestos information before work starts
- Check joints after other trades have worked nearby
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. That time depends on the product, the temperature and the joint depth, and we confirm it when each area is handed back. Leaving the area closed until then keeps the bead neat.
Sealant installed at the same time usually fails in sequence. A few splits this year typically mean more next year, so it makes sense to look at the wider elevation or block. We’ll tell you which sealant joints need doing first and which can wait.
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Leaks from pipework, wastes or valves (that’s plumbing)
- Old mastic that tests positive for asbestos
- Misted, cracked or failed glazing units (a glazier’s job)
Signs you need commercial sealant contractors
When a bead peels cleanly off one face, it has failed in adhesion. The usual causes are poor preparation, a missed primer, contamination on the joint face or sealant bonded to the base of the joint. It’s one of the commonest faults we find on earlier work.
Look out for the following:
- A top-up bead over failed sealant, now lifting
- Wall and floor joints that have lost their seal
- Black mould through washroom sealant that won’t clean off
- Damp patches where an external joint has failed
Your questions answered
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Is the old sealant taken out first?
Full removal is part of every quote. A bead laid on old silicone peels away and isn’t worth paying for.
Do you cover SP6?
Yes. We cover SP6, and the simplest way to start is to call 01277 525 020 or email us.
Does weather matter for sealant work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.