Facade and window perimeter sealing in Alderholt, Hampshire
Looking for facade sealing in Alderholt? It’s simple: send details, get a quote, we seal, guaranteed.
- Old perimeter mastic that has dried out
- New sealant peeling off old mastic
- Perimeter joints where frames meet the structure
Facade sealing for businesses in Alderholt
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Facade sealing in Alderholt, done properly
Some clients need every window on a block resealed; others need a few leaking frames sorted. Either way, the method is the same: cut out, clean, back, prime where needed and seal. Each job carries our 12-month guarantee. We work on window and door perimeters, coping and flashing joints and shopfront frames, and what we’re called in for most is damp patches beside frames after rain and hard, chalky sealant that no longer flexes. A single leaking joint is often how a building in Alderholt first comes to us: we look at the rest while we’re there and tell you what we find.
Building work in places the size of Alderholt is usually small-scale: a handful of new houses, barn conversions, a school or hall extension. Even a small site needs its perimeter and facade joints sized, backed and sealed properly.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Alderholt (SP6)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
Is a smaller place like Alderholt outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work at a site such as Fordingbridge Business Park, by Alderholt?
Yes. We cover Alderholt and the area around it, including industrial estates, business parks and retail parks such as Fordingbridge Business Park. To start, just ring 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can you handle several sites?
Yes. A group of buildings can go on one quote, with one point of contact.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Damaged frames that need replacing
- Water getting in through cracked render or porous masonry
- Replacing glass or failed glazing units
If you are not sure, just ring 01277 525 020 or send details through our quote form and we will give you a straight answer.
What we seal
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Shopfront frames
- Stone and brick facade joints
- Window and door perimeters
- Cladding panel joints
Quoting for work in Alderholt
Quotes vary with the job. It mainly depends on:
- Travel to remote or island sites
- The total length or number of joints
- The size and state of each joint
- Which sealant the job calls for
There’s no price list, since every building and every scope is different. Call for a quote.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- What the building is and how it’s used
- Specification clauses that apply
- A wide shot and a close-up of the area
- Approximate linear metres or a joint schedule
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email to discuss it first.
Facades, frames and programmes in Alderholt
Rainfall across the South East, Alderholt included, is lower than in many parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so we time external mastic for dry faces and agree it with the site team.
Units on estates such as Fordingbridge Business Park, 1.4 miles to the north-east of Alderholt, tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal. When a school such as St James' Church of England First School is extended or refurbished, the mastic package is often squeezed into the holidays. Historic houses such as Breamore House, 4.5 miles to the north-east of Alderholt, are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Alderholt is in Hampshire. Anywhere in SP6, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. 723 places across Hampshire fall within our area, including Alderholt. There’s a separate page for Southampton, roughly 19 miles from Alderholt.
If you need facade sealing in SP6, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Station Road, Antell's Way and South Hill or nearby, we can quote for facade joints. With the B3078 nearby, Alderholt is straightforward for us to reach. If your building is just outside Alderholt, we cover Sandleheath (1 mile north), Ashford (2 miles north-east), Broxhill (2 miles west), Damerham (2 miles north-west) and Rockbourne (4 miles north). Further afield, our area takes in Totton (14 miles east), New Milton (13 miles south-east), Ringwood (5 miles south-east), Barton on Sea (14 miles south-east), Ashley (13 miles south-east) and Eling (15 miles east).
Near you in Alderholt
Recent enquiries here include premises near The Churchill Arms and The Burgate School and Sixth Form, among other places. Nearby you’ll also find Godshill Castle Hill (3.6 miles north-east) and Fordingbridge Doll Museum (2 miles north-east). Open spaces near Alderholt include Blashford Lakes and Linbrook Lake.
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Alderholt can sit alongside others in a wider programme.
Places near Alderholt
Other services in Alderholt
Looking after the joints
After handover, a little attention goes a long way:
- Keep the sealant details on the building file
- Check the asbestos register before old mastic is disturbed
- Never let anyone seal over old sealant
- Share access with other external trades
Let the new sealant cure before washing the facade or windows near it. Pressure washers and harsh cleaners can damage a fresh bead.
Use each reseal to correct the joint: the right width, backing rod and a sealant with enough movement capability. Repeating a faulty detail just repeats the failure.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work usually takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather. If neighbouring businesses or buildings around Alderholt need work too, visits can be combined. Tell us your site hours and we will plan around them.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Point out parking and an unloading spot
- Send asbestos survey details if the building is pre-2000
- Tell staff and tenants when we will be in
Get a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or use the quote form.
Related advice
Doing it in-house
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.