Commercial washroom and wet-area sealing in New Forest, Hampshire
Sealing in commercial washrooms, showers, kitchens and wet areas throughout New Forest and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Stained or open joints at kitchen sinks and worktops
- Sealant lifting along a tray edge
- Failed joints along IPS and cubicle panels
Washroom sealing for New Forest sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
FAQs: New Forest
Is New Forest too small for you to travel to?
No. Places such as New Forest are covered as much as the big towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Which documents can you supply for work in New Forest?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
How long before the toilets can reopen?
Each sealant has a cure time before it should get wet. We plan the phasing around that so there are always rooms open.
Will cleaning remove black mould from sealant?
Typically not. The mould is inside the silicone so cleaning only lightens it for a while. Replacing the bead is the lasting answer.
Do you guarantee washroom sealing?
Our workmanship has a 12-month guarantee backed by public liability insurance.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Washroom sealing in New Forest, done properly
In a busy washroom, the sealant usually gives up long before the tiles or fittings. Around basins, urinals, cubicles, IPS panels and shower trays it takes water, soap, cleaning chemicals and knocks every day, and once mould grows into it, it can’t be scrubbed out. We strip it out and lay new anti-mould sanitary silicone. Site teams most often ask us about failed joints along IPS and cubicle panels and discoloured joints around urinals and WC pans, on vanity units and basins, IPS panels and cubicles and showers, trays and wet room floors. Facilities teams, main contractors and managing agents in New Forest tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In and around smaller places like New Forest, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Mould gets into sealant in any washroom that doesn’t dry out, and once it’s in, the sealant is replaced.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- New Forest (SP6)
- Wider area
- Hampshire
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Basins and vanity tops
Stone and some composite tops need a neutral-cure sealant and we choose a neutral-cure grade for them.
Kitchens and tea points
Staff kitchens and tea points have joints at worktops, sinks and splashbacks. Sound joints keep those surfaces easy to clean.
What affects the price in New Forest
Quotes vary with the job. Expect it to depend on:
- Location, for remote and island sites
- Induction, permit and paperwork requirements
- How accessible the joints are
- Working within restricted access windows
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Details that help us quote
A few photographs plus some basic facts will normally do. Please tell us:
- The product your specification calls for
- Access details, including height
- Any dates the work must fit around
- Clear photographs of the problem areas
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to speak to us on 01277 525 020 or send photos by email with what you know.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work typically takes a morning or so for a small washroom, longer where showers and changing rooms are included. For work around New Forest, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- Every room is surveyed and the failed joints listed.
- The fixed quote sets out the rooms, the products and the phasing.
- The whole of the old bead is removed.
- Joints are degreased and dried.
- A sanitary silicone bead is laid and given a smooth tooled finish.
- Each area is handed back when ready.
What we need from you
- Send any specification or drawings in advance
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
Quotes
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or use the quote form.
Read more
What we can’t put right
Sealant solves a lot, but not everything, and we are upfront when that’s the case. It won’t fix:
- A room that stays damp because ventilation isn’t working
- A dripping waste or valve behind a panel
- Hollow tiles or loose panels behind the joint
If you’re not sure, just call 01277 525 020 or email us and we will give you a straight answer before you book.
Where we work in New Forest
- Kitchens and tea points
- IPS panels and cubicles
- Urinals and WCs
- Showers, trays and wet room floors
- Accessible toilets and changing rooms
- Vanity units and basins
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Report faulty extraction promptly
- Photograph and log failed joints across the estate
- Report split joints at trays and basins early
- Share your site rules when you send details
Keep extract fans working and vents clear. A room that stays damp will grow mould on almost anything so report fans that aren’t working to your building services team.
Boards behind panels and vanity tops can swell when water gets past a failed joint. After that, those parts need replacing rather than resealing.
Why it’s worth doing now in New Forest
Water gets behind panels and under floors through a failed joint. In a commercial building that can mean damaged boards, stained ceilings on the floor below and odours which costs more to fix than a reseal. One visit to deal with every failing joint makes more sense than several trips to a place like New Forest. Photos of every joint help us quote for the whole job.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why clients in New Forest choose us
- A fixed quote before work starts
- 12 months’ guarantee on every job
- Commercial sealant work since 2005
- Products installed to the manufacturer’s instructions
See what affects the cost and our accreditations.
Toilets, showers and kitchens around New Forest
Around New Forest, washroom joints are resealed by removing the old silicone completely and laying anti-mould sanitary silicone on dry surfaces. Halls linked to places like Church of All Saints host groups all week, which is hard on kitchen and toilet sealant.
New Forest is in Hampshire. Any commercial site in New Forest is covered. Across Hampshire, 723 places are covered, New Forest among them. We also cover Southampton, some 23 miles away.
Business premises anywhere in SP6 are within our area for washrooms and wet areas. Buildings on Sillens Lane and Townsend Lane are within our area. We also cover Martin (1 mile north-east), Rockbourne (3 miles east) and Damerham (3 miles south-east) for washrooms and wet areas. Bigger towns within reach include Ringwood (11 miles south-east), Fordingbridge (6 miles south-east), St Leonards (11 miles south), Alderholt (6 miles south-east), Poulner (11 miles south-east) and Ashley Heath (10 miles south).
Around New Forest
A little further out are Cranborne Castle Hill (4.4 miles south). Not far away are Western Downs.