The Mastic Doctor team standing beside their branded vans outside an office building
Greater London · England

Facade and window perimeter sealing in Ickenham, Greater London

Work needed on a facade joint in Ickenham? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Leaks at window and door perimeters
  • Facade joints cracked through the middle
  • Draughts around frames and panels
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
London, the South East & Scotland
Constructionline member
Fully insured: £5m PL

Need facade sealing in Ickenham?

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Mastic packages on Ickenham sites

As part of Greater London, Ickenham is inside the ULEZ, which applies to every van on site. Delivery slots and scarce storage shape how and when the mastic goes in. The area within 2 miles of Ickenham holds a number of hotels. When hotels extend or refit, the work is normally squeezed between peak periods, mastic included.

For contractors at a college like Uxbridge College, 1 mile south-west of Ickenham, perimeters and internal sealant are timed for the holidays. Extensions at sites like Hillingdon Hospital (2.3 miles south of Ickenham) typically sit beside working departments, and the mastic follows strict access rules.

Ickenham is about 1 mile north of Hillingdon, in Greater London. Commercial clients in Ickenham use us for work on facade joints, as part of our coverage of Greater London. Ickenham is one of 764 places in Greater London on our list. There’s a separate page for London, roughly 16 miles from Ickenham.

We cover the UB10 postcode districts for facade joints. Among the streets we cover are Long Lane, Court Road and The Avenue. Just outside Ickenham, we also work in Hillingdon (1 mile south), Ruislip Gardens (2 miles east), New Denham (2 miles west), Newyears Green (2 miles north) and Uxbridge (2 miles south-west). Nearby towns on our patch include City of Westminster (13 miles east), Marylebone (13 miles east), Kensington (11 miles east), St Pancras (14 miles east), Hampstead (12 miles east) and Brompton (13 miles east).

Landmarks near Ickenham

In Ickenham, that means premises near Glebe Primary School, Church Field Gardens and Vyners School. For rail, the closest station is West Ruislip station, about 0.9 miles north-east of the centre. Other landmarks nearby include Hillingdon Hospital (2.3 miles south) and The Chimes (1.4 miles south-west). The countryside around Ickenham includes Northala Fields and Horse Shoe Bay.

Map of Ickenham © OpenStreetMap contributors

Facade sealing for commercial buildings in Ickenham

Weather decides a lot in facade sealing. The sealant needs a dry joint and temperatures inside the maker’s limits. We build that into the programme and tell you if the forecast changes the plan. If you have discoloured or dirty facade joints and water coming in around window frames, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Ickenham is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.

Construction in a London area such as Ickenham means working on constrained sites: limited storage, booked deliveries and access shared with other trades. We fit around the programme, sealing each elevation or floor as other trades hand over.

Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.

Mastic Doctor team members lined up next to their branded vans outside an office building
Where
Ickenham (UB10)
Wider area
Greater London
Guarantee
A 12-month guarantee
Quotes
Fixed quote, scope in writing
Telephone
01277 525 020
Last updated
3 November 2026

Diagnose, treat, sign off

Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Most London premises stay occupied while we are on site, so zones and timings are agreed with whoever manages the building. Phased work keeps the rest of the building in use.

  1. We look at the joints, the drawings and the access before pricing.
  2. Failed sealant is cut out along its full length.
  3. Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
  4. Closed-cell rod fixes the depth, and the sealant grips two sides only.
  5. A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
  6. We walk the finished joints with you before handing over.

What we need from you

  • Share your working hours and any access restrictions
  • Clear stock, furniture or equipment away from the joints
  • Let us know about inductions and permits

Request a quote

If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.

Get a quick quote

Advice

What affects the price in Ickenham

Sealant work doesn’t have a standard rate, because every site is different. What we look at:

  • Quantities, in metres or numbers
  • Site requirements such as inductions and permits
  • How much existing material needs removing
  • Specialist products, such as fire-rated or hygienic sealants

Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.

What to include in your enquiry

For an accurate fixed quote, we need to understand the site. Useful things to include:

  • Access details, including height
  • What the building is and how it’s used
  • The postcode of the building
  • Your programme or deadline

For a fixed quote, ring 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. Our quote form is another easy route.

When to bring in a specialist

Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.

A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.

Your questions answered

Can you cope with the access rules in a London building?

Yes. Inductions, permits and timed loading are routine for us in London. Send the building rules and access times with your enquiry. All of Greater London is inside the ULEZ, and our planning allows for it

Can you take on a job at a hospital such as Hillingdon Hospital?

Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

Is the work guaranteed?

Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.

Do you offer coloured sealant?

In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.

How much does the work cost?

We don’t publish prices, because every site is different. Send photos or drawings and we’ll price it at a fixed figure.

How do I request a quote?

You can use the quote form on this site; alternatively, phone 01277 525 020 or send photos by email. Include photos or drawings if you have them.

Do you cover Ickenham?

Yes. Sites across Ickenham are covered, and the same phone number covers every area.

What we’re called out for in Ickenham

Product choice matters: acetoxy-cure silicone may mark stone or corrode certain metals, and an interior product won’t last outdoors. Neutral-cure, facade-grade products are what most external joints need.

If one of these sounds familiar, it’s time for a closer look:

  • New sealant peeling off old mastic
  • Facade joints cracked through the middle
  • Staining on stone next to old sealant
  • Failed sealant on precast panel joints

New units and refits on sites such as Uxbridge Business Park, 1.4 miles to the west of Ickenham, need their panel and perimeter joints sealed to the specification.

Comparing quotes

  • The named product and why it was chosen
  • Their pre-qualification and accreditations
  • Can the work be phased to keep areas open?
  • Proof of insurance

Choosing a commercial sealant contractor

When something else is needed

We check first that sealant really is the fix. It isn’t the answer for:

  • Replacing glass or failed glazing units
  • Arranging specialist high-level access, which is planned with the client
  • Leaks from roofs, gutters or failed flashings rather than sealant joints

Not sure which it is? You can ring 01277 525 020 or use the quote form and we will tell you honestly.

What we seal

  • Cladding panel joints
  • Window and door perimeters
  • Stone and brick facade joints
  • Shopfront frames
  • Perimeter joints where frames meet the structure
  • Coping and flashing joints

How the job changes by surface

Precast concrete panels

Concrete edges can be dusty or weak. Faces are cleaned to sound concrete, and damaged edges are reported first.

Cladding panel joints

Panel joints on cladding and rainscreen systems take movement every day. We use a product rated for the movement and suited to the panel surface.

Accreditations

Trusted. Accredited. Insured.