The Mastic Doctor team standing beside their branded vans outside an office building
Greater London · England

Facade and window perimeter sealing in Brompton, Greater London

Facade joint and window perimeter sealing on commercial buildings across Brompton, by CSCS-carded applicators. CHAS accredited and fully insured.

  • Water coming in around window frames
  • Hard, chalky sealant that no longer flexes
  • Patch repairs that keep failing
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Facade sealing for Brompton sites

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Facade sealing in Brompton, done properly

We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure. Coping and flashing joints are included where sealant is the specified fix. If you are dealing with perimeter sealant that has split or peeled away and previous reseals run over old sealant, we can put it right. A single leaking joint is often how a building in Brompton first comes to us: we look at the rest while we’re there and tell you what we find.

Building sites in London tend to be tight: small compounds, delivery slots and shared hoists and scaffold. Mastic is usually one of the last trades on each elevation or floor, so we keep to the programme and the order of trades the site sets.

Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.

Location
Brompton (SW3, SW7, SW1X)
Wider area
Greater London
Guarantee
12 months on every job
Quote
Fixed quote, scope in writing
Call
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Diagnose, treat, sign off

Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. All of Greater London is in the ULEZ, and kerbside space in Brompton can be scarce. If there’s a loading bay, a car park or a permit we can use, tell us when you send details.

  1. We plan access and the order of elevations with the client.
  2. Weather and temperature are checked against the product’s limits.
  3. Each joint is cut out and the edges inspected.
  4. Joints are cleaned, primed if required and fitted with backing rod.
  5. Facade-grade sealant goes in and is tooled to a tidy concave profile.
  6. Once signed off, the work carries our 12-month guarantee.

Getting the site ready

  • Tell us what induction or permit system the site runs
  • For older buildings, check the asbestos register before work
  • Send your site hours and access windows

Quotes

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or email a schedule or drawings with what you know.

Get a quick quote

Read more

Contractors’ notes for Brompton

Brompton has plenty of hotels close by, all within 2 miles. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up. As part of Greater London, Brompton is inside the ULEZ, which applies to every van on site. London sites also mean booked deliveries and limited storage, which the mastic programme has to allow for.

On a healthcare site such as The Royal Marsden Hospital, 0.5 miles south-west of Brompton, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully. Recladding or extending a unit at a site like Brompton Cross District Shopping Centre. (less than half a mile west of Brompton) brings panel joints and frame perimeters into the programme.

Brompton is about 1 mile south of City of Westminster, in Greater London. Businesses, contractors and managing agents in Brompton use us for work on facade joints, as part of our coverage of Greater London. Across Greater London, 764 places are covered, including Brompton.

Anyone looking for facade sealing in SW3, SW7 and SW1X gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on West Road, Hans Road and Eaton Lane or nearby, send details and we will quote for facade joints. With the A315 and A3212 nearby, Brompton is easy to get to with materials and equipment. If your building is just outside Brompton, we cover Chelsea (1 mile south), Belgravia (1 mile north-east), South Kensington (1 mile south-west), Victoria (1 mile east) and Little Chelsea (1 mile south-west). Nearby towns on our patch include London (3 miles east), St Pancras (3 miles north-east), Shoreditch (4 miles north-east), Walthamstow (9 miles north-east), Hoxton (4 miles north-east) and Whitechapel (4 miles east).

Local landmarks in Brompton

We work on buildings around St Thomas More RC Language College, St Joseph's Catholic Primary School and Natural History Museum Library and Archives. Also close by are Shuckburgh Arms (under half a mile south-west) and Burton’s Court (0.5 miles south). For rail, the closest station is London Victoria station, roughly 0.8 miles east of the centre. Nearby you will also find Baynard's Castle (3 miles east) and Berkshire & Westminster Dragoons Museum (less than half a mile south-east). Open spaces near Brompton include Greville Place nature reserve and Serpentine.

Map of Brompton © OpenStreetMap contributors

Maintenance after handover

After handover, a little attention goes a long way:

  • Avoid patch repairs on failed facade joints
  • Don’t wait for a second leak before calling
  • Combine resealing with other works that need access
  • Ask about asbestos in pre-2000 mastic

Hold back any cleaning crew until the joints have had their stated cure time. Keep high-pressure jets and strong chemicals away from new sealant.

Don’t wait for a full elevation to fail. A few metres resealed promptly can stop water damage spreading.

Questions about Brompton

Do you cover business parks and estates near Brompton, such as Brompton Cross District Shopping Centre.?

Yes. Estates, retail parks and business parks around Brompton, Brompton Cross District Shopping Centre. Among them, are all within reach. A few photographs and the unit address let us price the work.

Could you schedule work at a campus like Faculty of Medicine (Imperial College London) for the vacation?

Yes, holiday working periods are the norm on campus jobs. Let us know which documents your site asks for, and we will confirm them alongside the quote.

Should we check old sealant for asbestos?

Some older mastics, especially in pre-2000 buildings, can contain asbestos. Check the asbestos register or survey before it is disturbed, and if anything is suspected, we stop until it’s tested. We don’t remove asbestos-containing materials.

Do you offer coloured sealant?

Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.

What hours do you work?

The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.

How long does a job like this take?

That varies with the scale of the job, though a typical visit usually takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather. For bigger or phased jobs, we’ll set out a timescale with the quote.

Can you quote from photographs?

Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.

For managing agents and facilities managers

If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.

Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.

Quoting for work in Brompton

There’s no standard rate for sealant work, since sites vary so much. What we take into account:

  • The total length or number of joints
  • Whether the work must be split into stages
  • How accessible the joints are
  • Site requirements such as inductions and permits

What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you’re ready.

Sending details for a quote

There’s no need for a formal survey. These details are enough to start:

  • How the joints are reached, and at what height
  • When you need the work done
  • The type of building and who uses it
  • Rough lengths or quantities, or drawings if you have them

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or use the quote form.

Do you need facade sealing in Brompton?

When the sealant tears down its centre, it has typically been asked to move more than it can. Too thin a bead, too narrow a joint or a product with the wrong movement class are common reasons.

It’s worth sending us details if you spot any of the following:

  • Leaks at window and door perimeters
  • Failed sealant on precast panel joints
  • Weathered facade joints that have lost their grip
  • Discoloured or dirty facade joints

Work at a hotel such as The Beaufort Hotel (under half a mile north of Brompton) tends to be programmed around bookings, mastic included.

What your quote should include

  • Their public liability cover
  • What the guarantee covers, and for how long
  • How they’ll work around occupants
  • How joint depth will be controlled

How to choose a sealant contractor

Should maintenance staff do it?

Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.

Accreditations

Trusted. Accredited. Insured.