Industrial and floor joint sealing in Hollington, Hampshire
Planning work on a floor joint in Hollington? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Loading bay joints breaking down
- Open saw cuts full of debris
- Trucks and loads jolting over damaged joints
Floor joint sealing for businesses in Hollington
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Hollington
We diagnose the floor first rather than guessing at a product: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run and the answer can differ from one zone to the next. We work on forklift and pallet-truck routes, joints along racking aisles and loading bays, and the failures we’re asked to look at most are sealant pulled out along a truck route and a rough ride across broken joints. Whoever orders the work in Hollington, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Hollington, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Hollington (RG20)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Common questions from Hollington clients
Is Hollington off your patch?
No. Places such as Hollington are covered as much as the big towns. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Will our site in Hollington have to close for joint sealing?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
What happens if the joint edges are damaged?
Filling against broken edges doesn’t last. If the arrises have spalled, we’ll say they need repair before filling and set out how that affects the job.
Are you insured?
Yes. We’re fully insured, including public liability cover.
Are you CHAS accredited?
Yes. We’re CHAS accredited and a Constructionline member.
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Smaller jobs around Hollington can be grouped with others nearby. A fixed quote is given before anything starts.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- Each phase reopens when the product is ready for wheels, then we start the next.
Before we start on site
- Have the specification and drawings to hand
- Share the asbestos register for older buildings
- Tell us which areas need to stay in use
Getting a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or send photos by email if you’d rather talk the job through.
Read more
Floor joint sealing around Hollington: how the place shapes the job
Hollington sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. At about 57 miles from central London, Hollington is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
Schools such as St Thomas' Church of England Infant School have movement joints in their walls and floors that are easy to overlook.
Hollington is about 5 miles south-west of Newbury, in Hampshire. Anywhere in RG20, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Hampshire coverage takes in 723 places, large and small. We also cover Reading, around 20 miles from Hollington.
Postcode districts covered here: RG20 for floor joints. Just outside Hollington, we also work in Highclere (1 mile north-east), Woolton Hill (2 miles north-east), Penwood (2 miles north-east), Ball Hill (2 miles north) and Enborne Row (3 miles north-east). Further afield, our area takes in Basingstoke (14 miles east), Andover (10 miles south-west), Tadley (11 miles east), Popley (14 miles east), Tidworth (13 miles south-west) and Kempshott (13 miles south-east).
Around Hollington
For rail, the closest station is Kintbury station, roughly 4.9 miles north-west of the centre. Nearby you will also find Newbury Castle (4.2 miles north). Not far away are Kintbury Newt Ponds and Pilot Hill.
Common problems we fix in Hollington
A slab keeps shrinking for a long time after it is cast, and saw-cut joints give that shrinkage a planned place to crack. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
Clients normally get in touch after noticing one or more of the following:
- Unfilled floor joints collecting dirt and grit
- Loading bay joints breaking down
- Brittle joint filler breaking up
- Sealant pulled out along a truck route
For floors and slabs around Hollington, the product is chosen for the traffic and the movement at each joint.
What your quote should include
- How the existing material will be dealt with
- Proof of insurance
- How long is the guarantee, and what does it include?
- Do they follow the manufacturer’s priming guidance?
Also near Hollington
Other services in Hollington
Honest limits
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is any of the following:
- Wide or random cracking that suggests a structural issue
- Level or flatness problems across the floor
- Unstable slabs moving under traffic
Not sure which it is? You can call 01277 525 020 or send photos by email and we will tell you honestly before you book.
Joints and surfaces we work on
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Loading bays
- Retail and showroom floors
Quoting for work in Hollington
The price varies from site to site. It mainly depends on:
- Phasing around occupants
- The site’s rules and procedures
- Joint width, depth and condition
- How much there is to seal
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
Good information means a firmer quote. Helpful details to send:
- Whether the building will be occupied during the work
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
- Any dates the work must fit around
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to speak to us on 01277 525 020 or email drawings and photos with what you know.
Looking after the joints
Cleaning and maintenance staff play a part too. Pass these on to them:
- Mention any aggressive cleaning regime at quote stage
- Make joint checks part of your floor inspections
- Treat loading bay joints first if they’re failing
- Keep trucks off new joints until we say they’re ready
Problems inside the 12-month guarantee period are ours to put right. After that, a check before your busiest period keeps small repairs small.
Joints are easiest to look after when someone checks them regularly. We can quote a programme that starts with the busiest areas so nothing is left to fail.