Tadley facade sealing
Planning work on a facade joint in Tadley? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Perimeter sealant that has split or peeled away
- Damp patches beside frames after rain
- Old perimeter mastic that has dried out
Facade sealing for businesses in Tadley
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our facade sealing in Tadley
Water ingress at window frames is a frequent reason facilities managers contact us. Failed perimeter sealant is a frequent cause, though that isn’t the only cause. If the evidence points away from the sealant, we say so before quoting. We work on coping and flashing joints, shopfront frames and cladding panel joints, and what we are called in for most is water coming in around window frames and draughts around frames and panels. Whoever orders the work in Tadley, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Developers and contractors working in Tadley want mastic that keeps pace with the build: sealing as scaffold comes down or as each floor is decorated, and snagging before handover. Tell us the programme and we will quote to it.
A 12-month guarantee applies to all our work. If an installation problem shows up, phone 01277 525 020 or email us and we’ll arrange a return visit.
- Where
- Tadley (RG26, RG7)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Brick and stone facades
On masonry, the sealant has to suit a porous, textured surface. We avoid acetoxy silicone, which can stain some natural stone, with primer where its maker specifies.
Render and coated surfaces
Where the joint will be painted over, a paintable hybrid or PU sealant may suit. We confirm the product with you before starting.
Nearby places to Tadley
More services for Tadley
Building owners, agents and FMs in Tadley
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Tadley can sit alongside others in a wider programme across Hampshire.
Tadley: questions and answers
Will you fit the mastic around our build programme in Tadley?
Yes. The mastic is planned around your key stages. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is a hospital such as Park Prewett Hospital somewhere you can work?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
What site paperwork can you supply?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
How do we ask for a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or use the quote form. Include photos or drawings if you have them.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs normally get a visit.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather. Town-centre premises in Tadley may have limited parking, so tell us what’s nearby. Industrial and business units usually have yard or car park space.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Quantities, in metres or numbers
- Travel to remote or island sites
- Induction, permit and paperwork requirements
- Working within restricted access windows
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- Where the site is, with the postcode
- The type of building and who uses it
- Access details, including height
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email us with what you know.
When to call us in Tadley
Sometimes the substrate is the problem: if the edge of the render, concrete or coating breaks away, the bead goes with it. When the joint edges need repair first, we say so.
Clients typically get in touch after noticing something like this:
- Unsightly perimeter sealant on a visible elevation
- Failed sealant on precast panel joints
- Leaks at window and door perimeters
- Failed seals around shopfront and entrance frames
New wings at hospitals like Park Prewett Hospital, 5.2 miles south of Tadley, bring long runs of window and panel joints to seal.
Comparing quotes
- Who will actually carry out the work
- How the joint faces will be prepared and primed
- Their approach to joint depth and backing
- Proof of insurance
Building and refurbishing in Tadley
The South East is one of the drier parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so we time external mastic for dry faces and agree it with the site team. The area within 2 miles of Tadley holds a number of hotels. When hotels extend or refit, the work is normally squeezed between peak periods, mastic included.
Work at a hotel such as The Broomsquire Hotel, under half a mile north-east of Tadley, tends to be programmed around bookings, mastic included. When a school such as Bishopswood Junior School is extended or refurbished, the mastic package is often squeezed into the holidays.
Tadley is about 6 miles north of Basingstoke, in Hampshire. We cover Tadley, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 723 places across Hampshire fall within our area, Tadley among them. Sites around Reading have their own page, about 10 miles away.
Postcode districts covered here: RG26 and RG7 for facade joints. For a building on Church Road, Ambrose Road and Wickham Close or nearby, we can quote for facade joints. Tadley sits on or close to the A340 and B3051. We also cover Baughurst (1 mile west), Pamber Heath (1 mile east), Heath End (1 mile west), Inhurst (2 miles west) and Aldermaston Soke (2 miles north-east). Bigger towns within reach include Basingstoke (6 miles south), Fleet (14 miles south-east), Yateley (13 miles east), Hook (9 miles south-east), Popley (5 miles south-east) and Kempshott (8 miles south).
Near you in Tadley
Recent enquiries here include premises near The Hurst School, The Falcon pub and The Hurst School and the streets around them. For rail, the closest station is Midgham station, roughly 3.3 miles north-west. Other landmarks nearby include Park Prewett Hospital (5.2 miles south) and Calleva Museum (1.9 miles east).