Facade Sealing contractors in Granton
Planning work on a facade joint in Granton? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Cladding panel joints that have opened up
- Hard, chalky sealant that no longer flexes
- New sealant peeling off old mastic
Facade sealing near Granton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing in Granton
A good facade joint depends on design as much as product. The width has to suit the expected movement and the sealant’s movement capability, while rod fixes the depth and stops the bead sticking to the rear, often at around 2:1 width to depth, as the manufacturer advises. We work on window and door perimeters, coping and flashing joints and cladding panel joints, and what we’re called in for most is damp patches beside frames after rain and patch repairs that keep failing. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Granton it comes down to the same thing: the right product in a properly prepared joint.
Sandstone and, in Aberdeen, granite buildings need care when new windows or panels are sealed against them: the right primer, a neutral-cure sealant and a colour that blends.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Granton (EH5, EH4, EH3)
- Wider area
- Edinburgh
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Sites and facades in and around Granton
The sea is no more than about 1 mile from Granton. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. Building work in Granton comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. Our job is to seal to that specification.
For a contractor working at a hospital such as Western General Hospital (Edinburgh), 1 mile south of Granton, perimeter and facade sealing is planned around patients and deliveries. For contractors refurbishing units at places like Broompark Business Park, less than half a mile to the north of Granton, the mastic covers cladding panels, roller-door and window perimeters. Hotels like Granton Hotel, less than half a mile north-east of Granton, rarely close for long, so refurbishment mastic is phased floor by floor.
Granton is about 2 miles north of Edinburgh, in Edinburgh. Across the EH5 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Granton is one of 174 places we cover in Edinburgh for facade joints.
Postcode districts covered here: EH5, EH4 and EH3. We cover commercial and managed buildings on Ferry Road, Granton Road and Pilton Avenue and the roads nearby. Main routes into Granton include the A903, which helps when planning parking and deliveries for the job. Nearby places we also cover include Boswall (1 mile east), Pilton (1 mile south-west), Crewe Toll (1 mile south-west), Edinburgh Waterfront (1 mile north-west) and East Pilton (1 mile south). Further afield, our area takes in Buccleuch (3 miles south-east), Dumbiedykes (3 miles south-east), Sciennes (3 miles south-east), Merchiston (3 miles south), Newington (3 miles south-east) and Queensferry (7 miles west).
What’s near Granton
Recent enquiries here include premises near Stockbridge public library, Old Chain Pier pub and Trinity Academy and the streets around them. For rail, the closest station is Haymarket station, roughly 2.2 miles south of the centre. A little further out are Newhaven Heritage Museum (1.3 miles east) and Ocean Terminal (2 miles east). Open spaces near Granton include Dunsapie Loch and Corstorphine Hill.
How the job changes by surface
Precast concrete panels
Precast panel joints have to absorb thermal and structural movement. A sealant of the right movement class goes in over backing rod.
Render and coated surfaces
Paintable sealants exist for joints that will be coated. The choice depends on the specification and finish.
Granton: questions and answers
Can you take on a job at a hospital such as Western General Hospital (Edinburgh)?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Will you take on work at estates like Broompark Business Park, close to Granton?
Yes, sites like Broompark Business Park are within our area, along with the rest of Granton. Send details of the unit and the work through our quote form for a quick quote.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
How much does the work cost?
We don’t publish prices, because every site is different. Send photographs or drawings and we’ll price it at a fixed figure.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Can you work in cold or wet weather?
We can work through the year, but sealant needs a dry joint and temperatures within the product’s range. Frost and condensation on glass and steel are common on winter mornings, so we plan around the forecast.
Site staff or a sealant specialist?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Maintenance after handover
Cleaning and maintenance staff play a part too. Share these points with them:
- Share access with other external trades
- Check the asbestos register before old mastic is disturbed
- Report water ingress at frames as soon as it shows
- Brief window cleaners about newly sealed joints
Include facade joints in your planned maintenance inspections. Watch for splits, gaps at the edges, hardening and discolouration.
Check older buildings for asbestos before disturbing old mastic. Older sealants can contain asbestos.
For managing agents and facilities managers
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Granton. Several sites can go on one quote, which keeps the paperwork simple.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Why act early in Granton
The longer a failed joint is left, the more the substrate suffers: wet edges break down, so repairs may be needed before resealing. Early action keeps it simple. In Granton, as across Scotland, rain finds any gap, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Granton
- Joints cleaned back to sound surfaces
- Work carried out by CSCS-carded applicators
- Constructionline member for supplier checks
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced or our accreditations and insurance.
How a job runs
We follow your site rules from the start: signing in, inductions and any permit to work. Once we are cleared to begin, we take the joints in the sequence agreed with you. Work on a big city site in Scotland typically involves inductions and permits. Tell us the rules and we’ll work to them.
- First we review photographs, drawings or what we saw on a visit, and agree how each joint will be reached.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- We walk the finished joints with you before handing over.
Preparing the site
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
- Make sure the joints can be reached
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or send details through our quote form.