Expansion Joint Sealing in The Grange
Expansion joint sealing for The Grange, from a contractor working since 2005. Fully insured and CHAS accredited.
- Debris jammed in movement joints
- Damp inside where a wall movement joint has failed
- Sealant peeling off one face of the joint
Expansion joint sealing in The Grange
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Questions we’re asked in The Grange
Our building in The Grange is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can you take on a job at a hospital such as Astley Ainslie Hospital?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Do you work in The Grange?
Yes. We take on work across The Grange, and the same phone number covers every area.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Are expansion joints and movement joints the same thing?
They’re closely related. A movement joint allows for expansion, contraction, shrinkage and loading while the sealant stops grit and water getting in.
About our expansion joint sealing in The Grange
Joints in car park decks and ramps are among the hardest-working in any building. Tyres load the edges, and de-icing salts and water work into any gap, so failed seals soon lead to leaks onto the level below and broken edges. A sealant suited to traffic and the expected movement goes in. If you have weathered movement joint sealant that no longer flexes and sealant peeling off one face of the joint, we can put it right. Most enquiries from The Grange start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Industrial estates around Scotland’s cities hold warehouses, trade units and distribution sheds, each with saw-cut and construction joints under forklifts and pallet trucks. The right filler or sealant, laid in phases, keeps them operating.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- The Grange (EH9, EH8, EH3)
- Wider area
- Edinburgh
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Floors, slabs and movement joints in The Grange
The Grange lies within about 3 miles of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. The Grange is in the east of Scotland, which is drier than the west. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
Centres like Cameron Toll Shopping Centre, 1.1 miles south-east of The Grange, have mall floors and service decks whose joints carry steady traffic. Another example is Peffermill Industrial Estate, 1.6 miles to the east of The Grange, where floors and yards would be done in stages around the occupiers.
The Grange is about 1 mile south-east of Edinburgh, in Edinburgh. Our applicators travel to The Grange for work on movement joints, handled exactly as we handle every other area. Across Edinburgh, 174 places are covered, The Grange among them.
If you need expansion joint sealing in EH9, EH8 and EH3, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Lauder Road, Meadow Lane and Grange Road or close by, send details and we’ll quote for movement joints. You’ll find The Grange on or near the A700. We also cover Burgh Muir (1 mile south-east), Sciennes (1 mile north), Marchmont (1 mile north-west), Newington (1 mile east) and St Leonard's (1 mile north-east). Further afield, our area takes in Leith (3 miles north), North Leith (3 miles north), Queensferry (9 miles north-west), Timber Bush (3 miles north), South Portobello (3 miles east) and Southhouse (3 miles south-east).
Around The Grange
We work on buildings around National Museums Scotland Library, St Crispin's School and 15-16 Argyle Place pub and the streets around them. Other local landmarks include The Meadows (0.5 miles north-west) and James Gillespie's High School (0.5 miles west). The Grange’s nearest station is Edinburgh Waverley station, roughly 1.2 miles north. Other landmarks nearby include Merchiston Tower (1 mile west) and Morita Museum of Fine Art (0.6 miles east). For a walk, there’s Salisbury Crags and The New Leaf Co-op.
Surface by surface
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement, with primer where specified.
On site: what to expect
We follow your site rules from the start: signing in, inductions and any permit to work. Once we are cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Work on a big city site in Scotland normally involves inductions and permits. Tell us the rules and we will work to them.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- Point out parking and an unloading spot
- Move anything stored against the joints
- For older buildings, check the asbestos register before work
Quotes
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Advice
Do you need expansion joint sealing in The Grange?
Sometimes the sealant holds but the substrate breaks away. If the edge of the joint is friable, the bond fails with it.
Look out for the following:
- Layers of sealant in a movement joint
- Expansion joints filled with dirt and stones
- Damp inside where a wall movement joint has failed
- Water dripping through deck or ramp joints
For buildings at a park such as Blackford Business Park, 0.6 miles south of The Grange, brick and panel movement joints are easy to forget until one leaks.
Before you book anyone
- How they’ll work around occupants
- Whether primer will be used where the manufacturer specifies it
- Their approach to joint depth and backing
- Whether old or failed sealant will be cut out, not overlaid
Why act early in The Grange
Doing joint resealing alongside other planned works can save on access. Leaking joints need sealing now because damage continues. Urgent joints now, the rest later, is often the sensible plan. In a Scottish city, access often needs scaffold, permits or factor approval, so it makes sense to renew every failing joint while it’s in place.
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why us?
- A Constructionline member, so easy to vet
- CHAS accredited
- Clear, fixed quotes
- Joints cleaned back to sound surfaces
See what affects the cost and our accreditations and insurance.
How the quote is worked out
To price the job, we consider:
- Phasing around occupants
- Site requirements such as inductions and permits
- Joint width, depth and condition
- Location, for remote and island sites
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
What we need to price the job
The more we know, the firmer the quote. Helpful details to send:
- What the building is and how it’s used
- Any specification or named product
- A wide shot and a close-up of the area
- Drawings or a marked-up plan, if available
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to ring 01277 525 020 or email the details over.
Also near The Grange
What else we do in The Grange
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.