Expansion and movement joint sealing in Rochester Riverside, Medway
Expansion and movement joint sealing in walls, decks and floors in Rochester Riverside and across Medway. CHAS accredited and fully insured, with a 12-month guarantee.
- Car park joints leaking onto vehicles below
- Hardened, cracked sealant on exposed facades
- Torn sealant in brick or block movement joints
Expansion joint sealing near Rochester Riverside
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Questions we are asked in Rochester Riverside
Is Rochester Riverside off your patch?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Can you work at a site such as Castle View Business Centre, by Rochester Riverside?
Yes, sites like Castle View Business Centre are within our area, along with the rest of Rochester Riverside. Send details of the unit and the work through our quote form for a quick quote.
Do the joint edges need to be sound before sealing?
Spalled edges need repairing before a new seal will last. A bead on a broken edge soon lets go.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, which many sites require.
What timescale should we allow for resealing expansion joints?
It typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. We confirm the timescale with the quote, including any phasing.
Which product is best for expansion joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote so there are no surprises.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
Expansion joint sealing in Rochester Riverside, done properly
A movement joint only works while its seal does. Once it fails, water, grit and debris get in, the joint can’t close properly and its edges begin to crumble. Resealing at the first signs of failure is far cheaper than repairing the material either side. If you have water getting into the wall through a failed joint and expansion joints filled with dirt and stones, we can help. A specialist sealant contractor works differently from a general builder: on jobs in Rochester Riverside, preparation and product choice get the time they need.
Rural business units around smaller places such as Rochester Riverside often have new slabs laid inside older buildings. Joints in those slabs need a product suited to whatever runs over them, from pallet trucks to foot traffic.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Rochester Riverside (ME1, ME2, ME3)
- Wider area
- Medway
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Damaged metal nosings or cover plates over a joint
- Leaks coming from the membrane rather than the joint seal
- Joints too narrow for the movement, which need redesigning by the engineer
If in doubt, ring 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Where we work in Rochester Riverside
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Brickwork movement joints
On site: what to expect
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access, and we clear our waste as we work. Work in places the size of Rochester Riverside is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- Next, we fix a price and confirm the sealant we propose for the movement.
- The failed seal is removed and both faces are cleaned until sound and dry, and we tell you if any edges need repairing first.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Tell us which areas need to stay in use
- Share the asbestos register for older buildings
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or email us to discuss it first.
Related advice
Building owners, agents and FMs in Rochester Riverside
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Rochester Riverside can form part of a wider programme across Medway.
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Quantities, in metres or numbers
- How accessible the joints are
- Whether old sealant has to be cut out first
- Whether the work must be split into stages
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Sending details for a quote
For an accurate fixed quote, we need to understand the site. Send us:
- Rough lengths or quantities, or drawings if you have them
- How the joints are reached, and at what height
- Your programme or deadline
- Any specification or named product
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email a schedule or drawings with what you know.
Expansion joint sealing in Rochester Riverside: the local picture
Rochester Riverside is within about 3 miles of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so it pays to keep them sealed. Rochester Riverside is about 27 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift.
Another example is Strood Retail Park, 0.6 miles north-west of Rochester Riverside, where floors and yards would be done in stages around the occupiers. For buildings at a park such as Castle View Business Centre, less than half a mile north of Rochester Riverside, brick and panel movement joints are easy to forget until one leaks. For estates staff at a university like University for the Creative Arts - Rochester, 0.8 miles south-east of Rochester Riverside, building and paving joints are part of the planned maintenance list.
Rochester Riverside is about 1 mile east of Rochester, in Medway. Commercial clients in Rochester Riverside use us for work on movement joints. Rochester Riverside is one of 54 places in Medway on our list for movement joints. London is covered too, around 27 miles from Rochester Riverside.
Postcode districts covered here: ME1, ME2 and ME3. Buildings on Crow Lane, Love Lane and Corys Road are within our area for movement joints. Just outside Rochester Riverside, we also work in Frindsbury (1 mile north), Chatham Waterfront (1 mile south-east), Brompton (1 mile east), Luton (2 miles south-east) and Chatham (3 miles south-east). Bigger towns within reach include Gillingham (3 miles south-east), Rainham (5 miles south-east), Park Wood (5 miles south-east), Lordswood (4 miles south-east), Twydall (4 miles east) and Hoo St Werburgh (3 miles north-east).
Near you in Rochester Riverside
Around Rochester Riverside, our work takes us to commercial buildings near St Michael the Archangel Church, Former Ordnance Store At Chatham Gun Wharf and St John Fisher RC Comprehensive School and the streets around them. You’ll also find Fort Pitt Grammar School (0.7 miles south-east), The Eagle Tavern (under half a mile south-west) and The Paddock (0.8 miles south-east). There’s a railway station in Rochester Riverside itself: Rochester station. Nearby you will also find Huguenot Museum (under half a mile west) and French Hospital (less than half a mile south-west). Open spaces near Rochester Riverside include Gad's Hill and Rede Common.
Maintenance after handover
After handover, these steps help:
- Brief car park operatives to protect joint lines during winter clearance
- Report split or peeling joint sealant early
- Keep product details with the building records for the next reseal
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in. Should you spot a problem, you can call the office on 01277 525 020 or use the quote form and send a picture.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles. Resealing early limits the damage.
What happens if it’s left?
Doing joint resealing alongside other planned works can save on access. But joints already letting water in shouldn’t wait for a programme, as damage continues meanwhile. Urgent joints now, the rest later, is often the sensible plan. Over time, UV, weather and movement wear any sealant out. Replacing it before it fails keeps water out.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Why appoint us
- Fixed quotes based on photos, drawings or a visit
- Old sealant cut out, never sealed over
- Colour options checked against the specified product
- Over 20 years of commercial sealing
Read our cost guide or how we’re accredited.