Expansion and movement joint sealing in Hale, Medway
Expansion and movement joint sealing in walls, decks and floors across Hale, by CSCS-carded applicators. CHAS accredited and fully insured.
- Sealant pulling off the joint face
- Expansion joints filled with dirt and stones
- Chipped joint edges on forklift routes
Expansion joint sealing across Hale
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Include every elevation and deck joint in periodic inspections
- Report split or peeling joint sealant early
- Look over external and deck joints after a hard winter
- Keep stones and debris out of open joint lines
Grit is the slow enemy of a joint seal. Stones pressed into the bead by wheels or feet can puncture it, especially on car park decks and warehouse floors. Regular sweeping keeps joint lines clear.
Rain gets into walls through torn brick and block movement joints. It can surface inside as damp a long way from the joint. Catching it early keeps the water outside.
About our expansion joint sealing in Hale
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels, so the right filler or sealant for the traffic and movement matters. We will tell you if the edges need repairing before sealing. We work on blockwork control joints, precast concrete panel joints and podiums and floor movement joints, and what we are called in for most is water dripping through deck or ramp joints and rain penetration at brick or block movement joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Hale it comes down to the same thing: the right product in a properly prepared joint.
Halls, schools and small commercial buildings near places like Hale have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
A 12-month guarantee applies to all our work. If an installation problem shows up, give us a call on 01277 525 020 or email a schedule or drawings and we’ll arrange a return visit.
- Where
- Hale (ME5)
- Wider area
- Medway
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Also in Hale
When to call us in Hale
When the movement exceeds the sealant’s capability, the bead tears. Cohesive failure, a split through the centre, normally means the joint or product wasn’t right for the movement. Resealing like for like often fails the same way.
Any of the following is a good reason to get the joints checked over:
- Weathered movement joint sealant that no longer flexes
- Expansion joints split through the centre of the bead
- Expansion joints filled with dirt and stones
- Sealant pulling off the joint face
University campuses such as University for the Creative Arts - Rochester (to the north-west of Hale) have car parks, paved walkways and building elevations with movement joints.
Questions to ask before you book
- Whether primer will be used where the manufacturer specifies it
- Which product they’ll use, and why it suits the joint
- Health and safety accreditation such as CHAS
- Will RAMS and insurance details be available?
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Hale may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Let building users know which areas are affected
- Agree which areas must stay open
- Send any specification or drawings in advance
Request a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
What the job involves on each surface
Joints between different materials
Hybrid or MS polymer sealants bond to many substrates. The choice depends on the substrates and how much the joint moves, and confirm it in the quote.
Car park decks and ramps
Water coming through deck joints is the usual first sign. The old seal comes out, the edges are prepared and the joint resealed flagging broken edges along the way.
How the quote is worked out
We price every job individually. The things that drive the figure:
- The total length or number of joints
- Access and working height
- Backing rod, priming and other preparation
- Location, for remote and island sites
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- Any dates the work must fit around
- Any specification or named product
- Photos of the joints, close up and from further back
- Where the site is, with the postcode
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or send photos by email if you’d rather talk the job through.
FAQs: Hale
Is Gillingham Business Park, near Hale, within your area?
Yes. Estates, retail parks and business parks around Hale, Gillingham Business Park among them, are all within reach. To start, just speak to us on 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Can you work on a hospital site such as Medway Maritime Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can a joint be sealed if the edges are broken?
Spalled edges need repairing before a new seal will last and we’ll flag every length affected. Sealing over them leads to early failure.
What happens if it’s left?
A like-for-like reseal of a joint that keeps splitting rarely lasts. If the joint is too narrow or the product wrong for the movement, it needs a different approach, and we will say so before quoting. Around Hale, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why clients in Hale choose us
- Fully insured
- Specification-led, product-correct work
- A Constructionline member, so easy to vet
- Colours chosen to suit frames, cladding or finishes where possible
Read how commercial sealant jobs are priced and how we’re accredited.
Traffic, movement and joints around Hale
Hale sits close to the coast, within about 3 miles. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Hale has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Hospital campuses such as Medway Maritime Hospital (to the north-west of Hale) grow in stages, leaving movement joints wherever new blocks meet old. Schools such as Kingfisher Community Primary School have movement joints in their walls and floors that are easy to overlook.
Hale is about 1 mile south-west of Gillingham, in Medway. Any commercial site in Hale is covered, whether it’s a single job or part of a planned programme. Hale is one of 54 places in Medway on our list. There’s a separate page for London, roughly 30 miles from Hale.
Anyone looking for expansion joint sealing in ME5 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We also cover Darland (1 mile south-east), Capstone (1 mile south-east), Luton (1 mile north-west), Gillingham (1 mile north-east) and Chatham (1 mile south-west) for movement joints. A short drive away, we cover Rochester (3 miles north-west), Strood (4 miles north-west), Hoo St Werburgh (4 miles north), Rochester Riverside (3 miles north-west), Frindsbury (3 miles north-west) and Borstal (3 miles west).
Around Hale
In Hale, that means premises near The Star pub, Chatham Grammar School for Girls and Darland Banks, among other places. For rail, the closest station is Gillingham (Kent) station, about 1.6 miles north of the centre. Nearby you will also find Rochester Castle (2.9 miles north-west) and Pentagon Shopping Centre (1.9 miles north-west). The countryside around Hale includes Blue Bell Hill and Burham Down.