Expansion and movement joint sealing in Old Struan, Perth and Kinross
Expansion and movement joint sealing in walls, decks and floors in Old Struan and across Perth and Kinross. CHAS accredited and fully insured, with a 12-month guarantee.
- New sealant over old, now failing
- Joints packed with grit and debris
- Water getting into the wall through a failed joint
Expansion joint sealing for businesses in Old Struan
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing for commercial buildings in Old Struan
Joint design counts for as much as the sealant itself. The joint has to be wide enough for the expected movement and the sealant’s movement capability while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1, and the bead is tooled so it grips the two faces alone. If you are dealing with torn sealant in brick or block movement joints and brittle, chalky sealant on external joints, we can help. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Old Struan is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In smaller places such as Old Struan, the joints we are asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Old Struan (PH18)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Avoid parking heavy plant or pallets on joint lines
- Act on the first tear or lifting edge rather than waiting
- Inspect movement joints alongside other routine building checks
- Record the sealant used and the date in the O&M file
Debris does more harm to joint sealant than most people realise. Grit trodden or driven into the joint works at the surface until it tears, especially on car park decks and warehouse floors. A routine sweep is the simplest protection.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it, which is bad news for the concrete and the people parking below. Sealing the joint promptly stops it at source.
Quoting for work in Old Struan
Before we quote, we look at:
- Access and working height
- Working within restricted access windows
- Distance, for remote addresses
- The product specified
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
To price the job accurately, we need to understand the site. Send us:
- A wide shot and a close-up of the area
- When you need the work done
- Access details, including height
- The product your specification calls for
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, give us a call on 01277 525 020 or use the quote form.
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
On site: what to expect
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before we move to the next. Jobs near Old Struan are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Finished joints are checked and backed by our 12-month guarantee.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Let building users know which areas are affected
- Send your site hours and access windows
Quotes
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Advice
Where floor joints take the most wear near Old Struan
Old Struan is in the east of Scotland, which is drier than the west. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
For floors and slabs around Old Struan, the product is chosen for the traffic and the movement at each joint. A joint near Old Struan that has lost its sealant lets in water and grit, and the edges suffer next.
Old Struan is about 26 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. If you are looking for expansion joint sealing in Old Struan, we can help, as we do across Perth and Kinross. Across Perth and Kinross, 114 places are covered, Old Struan among them. For work in that direction, see our Dundee page (42 miles or so).
Commercial sites across PH18 are covered for movement joints. Close to Old Struan, our area also takes in Old Blair (4 miles east), Bridge of Tilt (4 miles east), Blair Atholl (4 miles east), Trinafour (5 miles west) and Moulin (9 miles east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or use the quote form.
Landmarks near Old Struan
The closest station to Old Struan is Blair Atholl station, roughly 3.9 miles east. A little further out are Clan Donnachaidh Museum (0.9 miles north-east) and Blair Castle (3.7 miles east). For a walk, there’s Creag Odhar and Loch Bhac.
Questions about Old Struan
What site paperwork comes with a job in Old Struan?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Do we have to stop operations in Old Struan while the joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
Do you offer coloured sealant?
It depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Also near Old Struan
Other services in Old Struan
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Why act early in Old Struan
Spot repairs can be useful on a tight budget. But if the rest of the run is the same age and product, it’s usually not far behind and repeated access costs add up. Where it helps, we quote both options. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Old Struan before they leak.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why clients in Old Struan choose us
- One number for every site we cover
- Colours chosen to suit frames, cladding or finishes where possible
- Over 20 years of commercial sealing
- Our applicators hold CSCS cards
Read what affects the cost and our accreditations and insurance.