Expansion and movement joint sealing in Norseman, Orkney Islands
Planning work on a movement joint in Norseman? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Hardened, cracked sealant on exposed facades
- Previous reseals laid over old sealant
- Movement joints with split or torn sealant
Expansion joint sealing for Norseman sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle expansion joint sealing in Norseman
Floor movement joints in warehouses, retail and public buildings carry wheeled traffic. Unsupported edges break up under wheels so the product has to suit both the traffic and the movement. If the arrises are already broken, we’ll say so before sealing, and phased work keeps areas in use. If you have previous reseals laid over old sealant and brittle, chalky sealant on external joints, we can put it right, whatever the surface. Facilities teams, main contractors and managing agents in Norseman tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller Scottish places like Norseman, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Place
- Norseman (KW17)
- Wider area
- Orkney Islands
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
For managing agents and facilities managers
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
On site: what to expect
Tell us your site hours and access windows and we will plan around them. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Norseman is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Confirm the product named in the specification
- Flag any permit to work we’ll need
- Tell us your opening times and when work is allowed
Request a quote
To get a fixed quote, give us a call on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
Maintenance after handover
To get the most from the new sealant:
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Check joints after long freezing spells
- Avoid parking heavy plant or pallets on joint lines
- Report split or peeling joint sealant early
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records.
Once debris packs a failed joint, the structure has nowhere to expand. The arrises crack and break away under the load and the reseal becomes an edge repair as well. A sound seal keeps the joint working.
Joints that move: notes for Norseman
The sea is no more than about 1 mile from Norseman. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. For an island location such as Norseman, work is planned around ferry crossings and the weather. Photos and joint sizes help us load the right products.
Around Norseman, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Norseman is about 7 miles north-west of Kirkwall, in the Orkney Islands. We send applicators to Norseman for movement joints. We work across 51 places in the Orkney Islands.
We cover the KW17 postcode districts for movement joints. If your building is just outside Norseman, we cover Isbister (1 mile east), Settiscarth (1 mile west), Gorseness (2 miles north-east), Tingwall (3 miles north-east) and Finstown (3 miles south). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Landmarks near Norseman
A little further out are Corrigall Farm Museum (3.4 miles west) and Langskaill House (4.1 miles north-east). Open spaces near Norseman include Ward of Redland and Loch of Brockan.
Cost factors for movement joints
What shapes the price:
- Location, for remote and island sites
- Phasing around occupants
- The size and state of each joint
- Removal of failed or old sealant
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
What we need to price the job
To price the job accurately, we need to understand the site. Send us:
- Photos of the joints, close up and from further back
- When you need the work done
- The asbestos register, for older buildings
- The product your specification calls for
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or email drawings and photos with what you know.
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What we’re called out for in Norseman
Some joints were never sealed with the right product. Products not classed for the movement fail early. Movement capability is set out in BS EN ISO 11600, and specifications often refer to it.
Most enquiries start with one or more of the following:
- Torn sealant in brick or block movement joints
- Water dripping through deck or ramp joints
- Expansion joints filled with dirt and stones
- Water getting into the wall through a failed joint
A joint near Norseman that has lost its sealant lets in water and grit, and the edges suffer next.
What to look for in a quote
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
- Health and safety accreditation such as CHAS
- How joint depth will be controlled
Towns and villages near Norseman
What else we do in Norseman
Questions we’re asked in Norseman
Is Norseman inside the area you cover, given it’s on an island?
Yes. Every Scottish council area is within our area, and that includes island locations such as Norseman. Island work is planned around ferry crossings and the weather, so photos and a full list before we travel are essential.
Our building in Norseman is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We check the specified product suits the exposure and pay close attention to preparation.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long does movement joint sealing take?
It usually takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases. We’ll confirm when each area can be used again.
Why has the sealant in our expansion joints split?
The common causes are poor preparation, three-sided adhesion, the wrong movement class and weathering. Working out the cause comes first since each needs a different fix.
Can you quote from photos?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.