Settiscarth expansion joint sealing
We carry out expansion and movement joint sealing in walls, decks and floors in Settiscarth. Send details for a fixed quote.
- Car park joints leaking onto vehicles below
- New sealant over old, now failing
- Hardened, cracked sealant on exposed facades
Expansion joint sealing across Settiscarth
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Different surfaces, different methods
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. A sealant with the right movement class is chosen, and we’ll confirm the colours available for the specified product.
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.
Expansion joint sealing for commercial buildings in Settiscarth
Long runs of brick or block have movement joints built in, and they’re easy to miss until the sealant fails. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied. If you are dealing with sealant peeling off one face of the joint and torn sealant in brick or block movement joints, we can help. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Settiscarth it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For outside joints near Settiscarth, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Internal floors can be done whenever suits the site.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Settiscarth (KW17)
- Region
- Orkney Islands
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Expansion joint sealing in Settiscarth: the local picture
Settiscarth sits close to the coast, within about 2 miles. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. Being in the east of Scotland, Settiscarth gets less rain than the west coast. Freezing weather and salt still attack open external joints. Sealing them before winter limits the damage.
For floors and slabs around Settiscarth, the product is chosen for the traffic and the movement at each joint. Around Settiscarth, open joints collect water and debris, and the arrises are the next to go; we’ll tell you if the edges need repairing first.
Settiscarth is about 7 miles north-west of Kirkwall, in the Orkney Islands. Across the KW17 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 51 places in the Orkney Islands, large and small.
If you need expansion joint sealing in KW17, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your building is just outside Settiscarth, we cover Norseman (1 mile east), Isbister (2 miles east), Harray (3 miles west), Bimbister (3 miles south-west) and Finstown (3 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or email the details over.
Landmarks near Settiscarth
A little further out are Corrigall Farm Museum (2.5 miles west) and Langskaill House (4.8 miles north-east). For a walk, there’s Birsay moors RSPB Reserve and Loch of Brockan.
FAQs: Settiscarth
Will our site in Settiscarth have to close for joint sealing?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Does a coastal location like Settiscarth affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Waterproofing layers buried beneath the sealant
- Damaged metal nosings or cover plates over a joint
- Crumbling edges that would give a new bead nothing sound to grip
Not sure which it is? You can give us a call on 01277 525 020 or email us and we’ll tell you honestly before you book.
What we seal
- Blockwork control joints
- Car park decks and ramps
- Precast concrete panel joints
- Brickwork movement joints
- Cladding panel joints
- Podiums and floor movement joints
Keeping the joints sound
Regular inspection catches problems early. In particular:
- Treat a small split as a warning, not a cosmetic issue
- Record the sealant used and the date in the O&M file
- Keep traffic off new joints until the cure time is up
- Keep scrapers and ploughs from dragging across joint sealant
Debris does more harm to joint sealant than most people realise. Stones pressed into the bead by wheels or feet can puncture it, especially on car park decks and warehouse floors. A routine sweep is the simplest protection.
Joints sealed at the same time generally fail around the same time. It pays to check every joint, not just the obvious one, so the work can be planned rather than rushed. We’ll tell you which movement joints need doing now and which can wait.
Our process
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. Travel to smaller Scottish places like Settiscarth is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- The failed seal is removed and both faces are cleaned until sound and dry.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Point out parking and an unloading spot
- Tell us your opening times and when work is allowed
Request a quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Advice
Commercial clients in Settiscarth
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Settiscarth can form part of a wider programme.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
What else we do in Settiscarth
Why it’s worth doing now in Settiscarth
Some quotes just add sealant over the old bead. A bead over the old seal can’t bond or flex, so it fails quickly. Full removal and preparation is in every quote. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Settiscarth before they leak.
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we will explain how it’s made up.
What you get with us
- Colours chosen to suit frames, cladding or finishes where possible
- Specification-led, product-correct work
- Fully insured
- Work carried out by CSCS-carded applicators
Read what affects the cost and how we’re accredited.