Melvich expansion joint sealing
Expansion joint sealing in Melvich, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Expansion joints filled with dirt and stones
- Torn sealant in brick or block movement joints
- Water dripping through deck or ramp joints
Expansion joint sealing near Melvich
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Melvich: questions and answers
Our building in Melvich is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We check the specified product suits the exposure and pay close attention to preparation.
Do we have to stop operations in Melvich while the joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
Can staff carry on working while you’re here?
In the majority of cases, yes. Phased work can be planned so areas stay in use.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
How we handle expansion joint sealing in Melvich
Buildings and slabs are never completely still: they expand in the heat, shrink as they dry, and shift under load. Movement joints are where that movement is absorbed. We seal and reseal movement joints in walls, panels, decks and floors. The enquiries we see most involve weathered movement joint sealant that no longer flexes and debris jammed in movement joints, on brickwork movement joints, podiums and floor movement joints and precast concrete panel joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Melvich it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For floor or movement joints around smaller places like Melvich, we plan to finish in one visit where we can. Send photos, joint widths and details of the traffic first.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Melvich (KW14)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Nearby places to Melvich
Also in Melvich
Looking after the joints
Problems stay small when the joints are checked regularly. In particular:
- Include every elevation and deck joint in periodic inspections
- Check joints after long freezing spells
- Clear dirt from joint lines during routine cleaning
- Raise snow-clearing blades over deck joints where possible
Debris does more harm to joint sealant than most people realise. Grit trodden or driven into the joint works at the surface until it tears and decks and floors suffer most. A routine sweep is the simplest protection.
When one joint fails, others of the same age are rarely far behind. Inspecting the whole run is worth the effort, so the work can be planned rather than rushed. We can suggest an order, worst joints first.
What sets the cost
Each job is priced on its own details. The main factors are:
- Site requirements such as inductions and permits
- How much there is to seal
- The product specified
- The size and state of each joint
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
What to include in your enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- Your programme or deadline
- Drawings or a marked-up plan, if available
- Specification clauses that apply
- Access details, including height
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Leave it or put it right?
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
A quote for movement joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
Why choose Mastic Doctor in Melvich
- Over 20 years of commercial sealing
- Fully insured, including public liability cover
- Specification-led, product-correct work
- Coloured sealants to suit the setting, where available
Read what affects the cost and our accreditations.
For managing agents and facilities managers
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Traffic, movement and joints around Melvich
Melvich lies within about 1 mile of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. The east of Scotland, where Melvich is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
Around Melvich, each joint gets a filler or sealant matched to what crosses it and how much it moves. Around Melvich, open joints collect water and debris, and the arrises are the next to go.
Melvich (Gaelic: Meabhaich) is about 15 miles west of Thurso, in Highland. We send applicators to Melvich for movement joints, handled exactly as we handle every other area. Melvich is one of 256 places we cover in Highland for movement joints.
Work on movement joints is covered throughout KW14, for business premises of every kind. Streets here include Melvich Terrace and Pentland Terrace, and sites on any of them can send details for a fixed quote. Close to Melvich, our area also takes in Portskerra (1 mile north-west), Strathy (3 miles west), Reay (5 miles east), Forss (11 miles east) and Am Blàran Odhar (11 miles west). Where a site is remote or on an island, we plan travel and materials carefully.
Around Melvich
For a walk, there’s Loch Sgiathanach.
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Where we can, we combine work around Melvich with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- We look at the joints, their width and how they’ve failed.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Finished joints are checked and backed by our 12-month guarantee.
Preparing the site
- Move anything stored against the joints
- Tell staff and tenants when we’ll be in
- Send asbestos survey details if the building is pre-2000
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or use the quote form if you’d rather talk the job through.