The Mastic Doctor team standing beside their branded vans outside an office building
Highland · Scotland

Expansion and movement joint sealing in Westfield, Highland

Expansion and movement joint sealing in walls, decks and floors in Westfield and across Highland. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.

  • Chipped joint edges on forklift routes
  • Layers of sealant in a movement joint
  • Sealant peeling off one face of the joint
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
CHAS & Constructionline
£5m public liability

Need expansion joint sealing in Westfield?

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Expansion joint sealing in Westfield, done properly

Few joints take as much punishment as those in a car park. Wheel loads, grit and de-icing salts attack the seal and the concrete either side, so failed seals soon lead to leaks onto the level below and broken edges. A sealant suited to traffic and the expected movement goes in, phasing bays so the car park can stay in use. We work on podiums and floor movement joints, blockwork control joints and cladding panel joints, and the failures we are asked to look at most are sealant peeling off one face of the joint and arrises breaking up along floor joints. Most enquiries from Westfield start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.

Travel to smaller places like Westfield is planned so the work is done in one trip where possible. Send photographs, joint widths and details of the traffic first.

Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.

Where
Westfield (KW14)
Wider area
Highland
Cover
A 12-month guarantee
Quotes
A fixed quote before we start
Call
01277 525 020
Page updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

Questions we’re asked in Westfield

Do we have to stop operations in Westfield while the joints are sealed?

Rarely. Work is phased around your operations. The phasing plan comes with the quote.

Is a smaller place like Westfield outside your area?

Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.

Do your applicators hold CSCS cards?

Yes. If you need card details for site access, let us know and we will send them with the quote.

What exactly is a movement joint?

The terms overlap a great deal. Both let materials grow and shrink with temperature, moisture and load while the sealant stops grit and water getting in.

How long will the joint resealing take?

It typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. We confirm the timescale with the quote along with the phasing plan.

Can you quote from photographs?

It depends on the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.

How much does the work cost?

We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.

From enquiry to sign-off

The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Westfield is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.

  1. We start with photos, approximate lengths and any drawings, visiting where needed.
  2. Joint widths and expected movement are checked against what the sealant can take.
  3. Old sealant and debris are cut out of every joint.
  4. Edges are checked, and we tell you if any need repairing before sealing.
  5. The right sealant goes in at the right depth, bonded to the two sides only.
  6. Each area is handed back after its cure time, under our 12-month guarantee.

Before we start on site

  • Move anything stored against the joints
  • Have the specification and drawings to hand
  • Let building users know which areas are affected

Request a quote

Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.

Get a quick quote

Advice

How the quote is worked out

The price varies from site to site. It mainly depends on:

  • How much there is to seal
  • Site requirements such as inductions and permits
  • Which sealant the job calls for
  • How accessible the joints are

We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we will price your job on its own details.

Before you send an enquiry

However big the job, these details speed things up:

  • A wide shot and a close-up of the area
  • Any specification or named product
  • Drawings or a marked-up plan, if available
  • The type of building and who uses it

Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.

How the job changes by surface

Cladding panel joints

Metal and composite panels shift considerably as temperatures change. A sealant with the right movement class is chosen in a colour confirmed for that product.

Brickwork and blockwork joints

Brick and block edges need careful preparation. Faces are prepared and primed wherever the sealant maker calls for it before the bead goes in.

Where floor joints take the most wear near Westfield

Westfield is in the east of Scotland, which is drier than the west. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them before winter limits the damage.

Large sites such as Dunbar Hospital (3.5 miles north-east of Westfield) have car parks, service roads and long elevations with movement joints in brick and panels. For floors and slabs around Westfield, the product is chosen for the traffic and the movement at each joint.

Westfield is about 4 miles south-west of Thurso, in Highland. We cover Westfield and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Westfield is one of 256 places in Highland on our list.

We cover the KW14 postcode districts for movement joints. Just outside Westfield, we also work in Janetstown (2 miles north-east), Glengolly (3 miles north-east), Forss (3 miles north), Thurso (4 miles north-east) and Scrabster (5 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.

Landmarks near Westfield

The closest station to Westfield is Thurso station, about 4.1 miles north-east. A little further out are Dunbar Hospital (3.5 miles north-east) and Scrabster Castle (4.3 miles north-east). The countryside around Westfield includes Loch Calder and Broubster Leans RSPB Reserve.

Map of Westfield © OpenStreetMap contributors

Keeping the joints sound

A few simple habits keep the new joints working:

  • Avoid parking heavy plant or pallets on joint lines
  • Inspect movement joints alongside other routine building checks
  • Keep scrapers and ploughs from dragging across joint sealant
  • Note which joints were done, when, and with what

On car parks, winter clearance can damage deck joint sealant. Raising blades over joints where possible protects the seal and a look at the joints after winter catches any damage.

An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall. Keeping the seal sound avoids all of that.

When it isn’t the sealant

Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:

  • Leaks coming from the membrane rather than the joint seal
  • Structural movement beyond what the joints were designed for (that needs a structural engineer)
  • Crumbling edges that would give a new bead nothing sound to grip

If in doubt, call 01277 525 020 or send photos by email and we will say what we think before you book.

Joints and surfaces we work on

  • Precast concrete panel joints
  • Podiums and floor movement joints
  • Brickwork movement joints
  • Cladding panel joints
  • Car park decks and ramps
  • Blockwork control joints

Doing it in-house

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.

Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.

Accreditations

Trusted. Accredited. Insured.