Expansion and movement joint sealing in Marybank, Na h-Eileanan Siar
We carry out expansion and movement joint sealing in walls, decks and floors in Marybank and the surrounding area. Send details for a fixed quote.
- New sealant over old, now failing
- Movement joints with split or torn sealant
- Water getting into the wall through a failed joint
Expansion joint sealing for Marybank sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Questions about Marybank
Can you take on a job in Marybank, on the island?
Yes. Our area covers all of Scotland, cities, towns and islands alike, and that includes island locations such as Marybank. Island work is planned around ferry crossings and the weather, so photographs and a full list before we travel are essential.
Does the sea air around Marybank change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
What if the joint edges are damaged?
Sealant needs sound faces to bond to, so broken or crumbling edges have to be repaired first. We flag it at the quote stage where we can see it.
Is movement joint sealing guaranteed?
The 12-month guarantee applies to the workmanship. If a joint we sealed fails inside the 12 months, let us know.
Can you seal joints in cold or wet weather?
Sealant needs a dry joint and a temperature within the product’s range. Cold, damp or frosty mornings can stop work outside, so we plan with the forecast in mind.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
What exactly is a movement joint?
They’re closely related. Both let materials grow and shrink with temperature, moisture and load while the sealant stops grit and water getting in.
How we handle expansion joint sealing in Marybank
For movement joints in Marybank, photographs and approximate lengths are the best start. We will come and look where photographs don’t show enough, then send a fixed quote that names the sealant. To discuss the joints first, call 01277 525 020 or email us. Most enquiries involve water dripping through deck or ramp joints and expansion joints filled with dirt and stones, on brickwork movement joints, blockwork control joints and podiums and floor movement joints. A single leaking joint is often how a building in Marybank first comes to us: we look at the rest while we’re there and tell you what we find.
For floor or movement joints around smaller places like Marybank, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Place
- Marybank (HS2, HS1)
- Wider area
- Na h-Eileanan Siar
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
More services for Marybank
How the quote is worked out
Quotes vary with the job. Expect it to depend on:
- Site requirements such as inductions and permits
- The product specified
- Quantities, in metres or numbers
- Whether the work must be split into stages
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Before you send an enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- How the joints are reached, and at what height
- Rough lengths or quantities, or drawings if you have them
- A wide shot and a close-up of the area
- What the building is and how it’s used
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email if you’d rather talk the job through.
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Marybank. That goes into the plan alongside the quote.
- We look at the joints, their width and how they’ve failed.
- A fixed quote follows, naming the sealant and its movement class.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Confirm the product named in the specification
- Tell us which areas need to stay in use
- For older buildings, check the asbestos register before work
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or send photos by email.
Related advice
Slabs, ramps and loading bays in Marybank
Marybank is within about 1 mile of the coast. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. Work on Marybank has to fit the ferry timetable and the forecast. Send joint sizes and details of the traffic so the right materials come on the crossing.
Warehouse floors on estates like Marybank Industrial Estate (to the east of Marybank) carry pallet trucks and forklifts over every saw-cut joint. Phasing is what makes joint work possible on busy sites such as Gleann Seileach Business Park (0.6 miles east of Marybank): one bay, aisle or car park row at a time.
Marybank is about 1 mile west of Stornoway, in Na h-Eileanan Siar. We send applicators to Marybank for movement joints, handled exactly as we handle every other area. We work across 87 places in Na h-Eileanan Siar.
Postcode districts covered here: HS2 and HS1 for movement joints. Buildings on Bennadrove Road, Airidhean Ur and Macgregor Park are within our area. Close to Marybank, our area also takes in Laxdale (1 mile north-east), Stornoway (1 mile east), Newmarket (1 mile north-east), Plasterfield (2 miles east) and Sandwick (2 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you give us a call on 01277 525 020 or send photos by email.
What’s near Marybank
Nearby you will also find Museum Nan Eilean (1 mile south-east) and Western Isles Hospital (1.3 miles east). Open spaces near Marybank include Loch Àirigh na Lic and Ben Barvas.
Do you need expansion joint sealing in Marybank?
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. Movement capability is set out in BS EN ISO 11600, and specifications often refer to it.
Site and facilities staff are often the first to spot these:
- Joints where the bead has lost adhesion
- Movement joints with split or torn sealant
- Weathered movement joint sealant that no longer flexes
- Joints packed with grit and debris
For an estate such as Western Isles Hospital (1.3 miles east of Marybank), the joints in ramps, decks and long building elevations all need attention over time.
What to look for in a quote
- Are they CHAS accredited or on Constructionline?
- How the existing material will be dealt with
- Whether their applicators hold CSCS cards
- Is the sealant right for the movement and the substrate?
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Marybank can form part of a wider programme across Na h-Eileanan Siar.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Different surfaces, different methods
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. Where the specification calls for sealant, we reseal and flag it if the membrane looks like the source.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Keep scrapers and ploughs from dragging across joint sealant
- Report split or peeling joint sealant early
- Clear dirt from joint lines during routine cleaning
- Avoid parking heavy plant or pallets on joint lines
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in, when they’re still cheap to deal with. If anything looks wrong, give us a call on 01277 525 020 or email a schedule or drawings with photos.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it. Sealing the joint promptly stops it at source.