Na h-Eileanan Siar · Scotland
Commercial sealant contractors in HS1
We cover every part of the HS1 postcode district, including Stornoway, Plasterfield and Laxdale. Every joint is properly prepared, with a 12-month guarantee.
Sealant work in HS1
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where we work in HS1
Services in HS1
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Commercial sealant contractors
- Industrial and floor joint sealing
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Expansion and movement joint sealing
- Coloured and colour-matched sealant
- See all services
Let us know the job and your postcode for a fixed quote: ring 01277 525 020 or use the quote form.
Postcodes nearby
Elsewhere in Na h-Eileanan Siar
All places in Na h-Eileanan Siar
Every area we cover
Our commercial sealant contractors service in HS1
Getting a price for commercial sealant contractors in HS1 doesn’t need to be drawn out. Send photographs, drawings or a schedule of the joints through our quote form and you can also call the office on 01277 525 020 or send photos by email to talk it through. If the joints need seeing in person, a site visit comes first, and a fixed quote for the agreed scope follows. We work on floor and threshold joints, external facade joints and window and door perimeters, and what we are called in for most is external beads that have gone brittle and cracked and frame mastic that has hardened and come away from the wall.
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Where parts of the building must stay open, the work is phased.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- A final walk-round, then the 12-month guarantee applies.
How we quote
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What you get with us
- Matching to RAL references, product permitting
- Constructionline member for supplier checks
- Work carried out by CSCS-carded applicators
- Joints cleaned back to sound surfaces
Get a fixed quote
To get a fixed quote, speak to us on 01277 525 020 or use the quote form with the site address and an outline of the work. You can also send details through our quote form.
Landmarks near Stornoway
Around Stornoway, our work takes us to commercial buildings near Neptune's Bar and Nicolson Institute and the streets around them. Nearby you’ll also find Western Isles Hospital (0.5 miles north) and Lewis Loom Centre (under half a mile south-west). Not far away are Loch Àirigh na Lic.
Commercial sealant contractors across HS1: the area picture
Commercial buildings across HS1 range from older premises altered many times to recent units on business parks. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
Our work reaches every part of Scotland, cities and islands alike, HS1 among them. Travel is planned so the work is finished in as few trips as we can. In the parts of HS1 near the sea, the elevations facing the weather are where sealant gives up first.
Stornoway: Occupiers with premises at both Gleann Seileach Business Park and Marybank Industrial Estate could have the sealant at each handled under one quote. For tenants and agents on sites such as Gleann Seileach Business Park, which lies north-west of Stornoway, office fit-outs, reception joints and window perimeters are the usual sealant work.
Quoting for work in HS1
Your fixed quote is built from the real scope. It takes account of:
- Site requirements such as inductions and permits
- Access and working height
- How much there is to seal
- Distance, for remote addresses
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
Before you send an enquiry
We can often quote from photos and a few details. Please tell us:
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
- Your programme or deadline
- The type of building and who uses it
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or speak to us on 01277 525 020 or use the quote form if you’d rather talk the job through.
Building owners, agents and FMs in HS1
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Make sure contractors see the asbestos survey before cutting out old mastic
- Check sealant as part of routine building inspections
- Ask cleaners to use a soft cloth and mild cleaner on sealant
- Look at the sealant around anything that has been moved or replaced
Let your cleaning contractor know what’s new. Scourers, blades and harsh products shorten a bead’s life; a mild cleaner is all most joints need.
An open joint in a food area or toilet collects dirt and moisture that cleaning can’t reach. Environmental health officers look at how cleanable surfaces are, which makes sound joints worth keeping on top of.
What we’re called out for in HS1
External sealant takes a steady beating from the weather. Sunny elevations dry the surface out and exposed ones take driving rain, so beads chalk, stiffen and lose their stretch. Once it stiffens, the joint opens up at the next big temperature swing.
If one of these sounds familiar, it’s time for a closer look:
- Black mould through washroom sealant that won’t clean off
- Greasy, split joints in a kitchen or tea point
- Leaks that seem to come through a sealant line
- Frame sealant that has cracked, shrunk or pulled away
Different surfaces, different methods
Facade and cladding joints
Facade sealant failures can be hard to spot from the ground. Photos from a closer viewpoint help us price, with colours confirmed for the product chosen.
Commercial kitchens and tea points
Gaps and ragged beads trap dirt that cleaning can’t reach, and cleanability is part of what an inspector looks at. Work is timed around the hours you give us so the kitchen isn’t out of use longer than needed.
Common questions from HS1 clients
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Can you supply RAMS and insurance details?
We confirm documents at quote stage: most clients ask for RAMS, our insurance certificate and CSCS details. Our applicators are CSCS-carded.
What about asbestos in old mastic?
We check the asbestos register or survey before any old sealant is disturbed. The duty to manage asbestos sits with the dutyholder.
Do you take on multi-site sealant work?
Yes, we can. Give us the sites and the scope at each, and we will put together a fixed quote and a sensible order of work.