Expansion Joint Sealing in Newmarket
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Newmarket. Send details for a fixed quote.
- Car park joints leaking onto vehicles below
- Brittle, chalky sealant on external joints
- Arrises breaking up along floor joints
Expansion joint sealing across Newmarket
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing for commercial buildings in Newmarket
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. We work on brickwork movement joints, car park decks and ramps and podiums and floor movement joints, and the failures we’re asked to look at most are weathered movement joint sealant that no longer flexes and layers of sealant in a movement joint. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Newmarket, preparation and product choice get the time they need.
Travel to smaller places like Newmarket is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Newmarket (HS2)
- Region
- Na h-Eileanan Siar
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Slabs, ramps and loading bays in Newmarket
Newmarket lies within about 1 mile of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. Being on an island, Newmarket means planning around ferry times as well as the weather. Send joint sizes and details of the traffic so the right materials come on the crossing.
Hospitals like Western Isles Hospital (to the south of Newmarket) have multi-storey or surface car parks whose joints carry vehicles round the clock. Phasing is what makes joint work possible on busy sites such as Marybank Industrial Estate (1.2 miles south-west of Newmarket): one bay, aisle or car park row at a time.
Newmarket is about 1 mile north of Stornoway, in Na h-Eileanan Siar. We cover Newmarket and the rest of Na h-Eileanan Siar, with the same fixed quotes and 12-month guarantee as everywhere else. Across Na h-Eileanan Siar, 87 places are covered, including Newmarket.
Business premises anywhere in HS2 are within our area. Streets here include Bakers Road and Riverview, and sites on any of them can send details for a fixed quote. With the A857 nearby, Newmarket is easy to get to with materials and equipment. Close to Newmarket, our area also takes in Laxdale (1 mile south), Stornoway (1 mile south), Steinis (2 miles south-east), Plasterfield (2 miles south-east) and Tong (2 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Around Newmarket
A little further out are Western Isles Hospital (0.9 miles south) and Lewis Loom Centre (1.5 miles south). Open spaces near Newmarket include Ben Barvas and Loch Àirigh na Lic.
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Report split or peeling joint sealant early
- Brief car park operatives to protect joint lines during winter clearance
- Inspect exposed joints once the cold weather has passed
- Put movement joints on the planned maintenance inspection round
Grit is the slow enemy of a joint seal. Stones pressed into the bead by wheels or feet can puncture it, especially on car park decks and warehouse floors. A routine sweep is the simplest protection.
Joints sealed at the same time generally fail around the same time. It pays to check every joint, not just the obvious one so you can prioritise and budget. We’ll tell you which movement joints need doing now and which can wait.
Quoting for work in Newmarket
These are the things that shape the price:
- Distance, for remote addresses
- The size and state of each joint
- The total length or number of joints
- Whether old sealant has to be cut out first
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote when you are ready.
Sending details for a quote
Whether it’s one area or a whole building, these details speed things up:
- The site address and postcode
- Clear photographs of the problem areas
- When you need the work done
- Rough lengths or quantities, or drawings if you have them
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
What sealant work can’t fix
Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:
- Proprietary pre-formed expansion joint systems
- Joints too narrow for the movement, which need redesigning by the engineer
- Crumbling edges that would give a new bead nothing sound to grip
If you are not sure, just ring 01277 525 020 or send details through our quote form and we’ll give you a straight answer before you book.
Where we work in Newmarket
- Precast concrete panel joints
- Car park decks and ramps
- Brickwork movement joints
- Podiums and floor movement joints
- Blockwork control joints
- Cladding panel joints
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Common questions from Newmarket clients
Our building in Newmarket is near the coast: does that change the sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can you work on a hospital site such as Western Isles Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Do you use silicone or polyurethane in movement joints?
Movement capability matters most as set out in BS EN ISO 11600. Where two different materials meet, a hybrid sealant can be the better choice.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
How do we ask for a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
Can you seal car park deck joints?
Yes. Deck and ramp joints are resealed with a trafficable sealant chosen for the movement, and phased work can be planned so parts of the car park stay in use.
How long will the joint resealing take?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. Typically it takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases.
Signs you need expansion joint sealing in Newmarket
When the movement exceeds the sealant’s capability, the bead tears. Cohesive failure, a split through the centre, typically means the joint or product wasn’t right for the movement. Resealing like for like often fails the same way, so we check width and movement before quoting.
Any of the following is a good reason to get the joints checked over:
- Water getting into the wall through a failed joint
- Spalled or broken joint edges in floors and decks
- Water dripping through deck or ramp joints
- Weathered movement joint sealant that no longer flexes
On a site such as Gleann Seileach Business Park, which lies south of Newmarket, the movement joints are in car park slabs, paving and building elevations.
What your quote should include
- How the existing material will be dealt with
- The terms of the workmanship guarantee
- Whether their applicators hold CSCS cards
- Whether primer will be used where the manufacturer specifies it
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For a building near Newmarket, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, and we tell you if any edges need repairing first.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- Move anything stored against the joints
- Send any specification or drawings in advance
- Agree which areas must stay open
Request a quote
For a fixed quote, phone 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.