Expansion joint sealing in Mail
Planning work on a movement joint in Mail? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Water dripping through deck or ramp joints
- Movement joints with split or torn sealant
- Rain penetration at brick or block movement joints
Expansion joint sealing for Mail sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing for commercial buildings in Mail
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises, and the bead is tooled so it grips the two faces alone. The enquiries we see most involve torn sealant in brick or block movement joints and water dripping through deck or ramp joints, across podiums and floor movement joints, precast concrete panel joints and brickwork movement joints. Whoever orders the work in Mail, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For outside joints near Mail, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Internal floors can be done whenever suits the site.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- Mail (ZE2)
- Region
- Shetland Islands
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Common questions from Mail clients
Does a coastal location like Mail affect which sealant is used?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Must our site in Mail stop work while the joints are done?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we will plan from there.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Why do our movement joints keep failing?
Typically the joint is moving more than the sealant can take. That’s why we check width, depth and movement class before quoting so the same failure isn’t repeated.
Do you seal on top of existing sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact.
Slabs, ramps and loading bays in Mail
With the shore within about 1 mile, Mail counts as a coastal location. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. Mail is in the east of Scotland, which is drier than the west. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them in drier months limits winter damage.
For floors and slabs around Mail, the product is chosen for the traffic and the movement at each joint. A joint near Mail that has lost its sealant lets in water and grit, and the edges suffer next.
Mail is about 9 miles south of Lerwick, in the Shetland Islands. Commercial clients in Mail use us for work on movement joints. Across the Shetland Islands, 63 places are covered, including Mail.
Business premises anywhere in ZE2 are within our area for movement joints. Close to Mail, our area also takes in Bremirehoull (1 mile north), Cunningsburgh (1 mile north), Aithsetter (2 miles north-east), Sandwick (2 miles south) and Hoswick (3 miles south). Nearby towns on our patch include Lerwick (9 miles north), Sound (8 miles north) and Scalloway (7 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you give us a call on 01277 525 020 or email us.
Near you in Mail
The countryside around Mail includes Loch of Fladdabister.
Different surfaces, different methods
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors, with a flexible sealant where movement is larger.
Car park decks and ramps
Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again flagging broken edges along the way.
What happens if it’s left?
Re-sealing with the same product that failed is often a false economy. If the joint is too narrow or the product wrong for the movement, it needs a different approach. Around smaller places like Mail, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why us?
- CHAS accredited contractor
- One phone line for London, the South East and Scotland
- Matching to RAL references, product permitting
- Fully insured
Take a look at our cost guide or our accreditations.
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Honest limits
Honesty saves time and money. Fresh joints won’t solve:
- Proprietary pre-formed expansion joint systems
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If you are not sure, just call 01277 525 020 or send photos by email and we’ll give you a straight answer.
What we seal
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Also in Mail
How a job runs
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building near Mail, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Have the specification and drawings to hand
- Let us know about inductions and permits
Ask for a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email a schedule or drawings.